Tube Guitar Heads

Bundle offer comprising

• Tube Amp Head for Electric Guitar
• Channels: 2
• Power: 25 watts
• Preamp tubes: 4x ECC83 / 12AX7
• Power tubes: 2x 6L6GC
• Controls: Clean Gain, Lead Gain, Bass, Middle, Treble, Lead Volume, Master Presence, Noise Gate (Threshold)
• Switches: Mid Boost, Clean Lead, Stand By, Power, Power Soak (Full, 5 W, 1 W, Speaker Off)
• Effects: Noise Gate
• Speaker outputs 8-16 ohms: 2x jack
• Effect grinding paths
• Input: 6.3 mm jack
• FX Send & Return: 2x 6.3 mm jack
• DI output: 6.3 mm jack
• 2 Footswitch connections: (Mid Boost, FX Loop On / Off, Clean / Lead, Master Volume Boost)
• Dimensions (W x D x H): 420 x 230 x 200 mm
• Weight: 11 kg
• Made in Germany

• Case
• Suitable for Engl E633 Fireball 25
• 6.8 mm Birch multiplex phenolic resin coated
• 22 x 22 mm Aluminium edge
• 2 Small butterfly fasteners
• 1 Strap handle
• 8 Small ball corners
• 4 Rubber feet: 25 x 15 mm
• Foam padding
• Unit can be operated in the lower part
• All connections freely accessible
• External dimensions (W x D x H): approx. 477 x 286 x 288 mm
• Weight: approx. 4.5 kg
• Colour: Brown
• Made in Germany

• Preamp based on the classic 1959 SLP
• 1 Channel with 4 separate inputs
• Power: 20 W with power reduction to 5 W
• Tubes: 2x ECC83, 1x ECC83 (Phase Splitter), 2x EL34
• DI out
• Serial FX loop
• Dimensions: 500 x 240 x 230 mm
• Weight: 9.25 kg

Bundle offer comprising

• Head amp for electric guitar
• All tube
• Power: 40 W
• 3 Channels: Clean, Crunch and Lead
• Power Soak: 40/20/5/1/0 W
• 3 x 12AX7 Preamp tubes
• 4 x EL84 Power tubes
• 2 Classic 3-band EQs
• TSC Tube Safety Control for constant and automatic monitoring and control of the final power tube bias
• Red Box AE Ambience Emulation DI output with the settings Vint. / Mod. and Small / Large to connect the amp directly to the PA or a recording setup
• Integrated MIDI IN with phantom power
• Serial FX loop
• 1 Speaker output: 8 - 16 Ohm
• Measurements: 44 x 17 x 15 cm
• Weight: 8 kg
• Incl. bag
• Corresponding foot switches: Article Nr 135680#/323250# (not included)

• Rack Mount Set
• Suitable for TubeMeister 36, TubeMeister 40 Deluxe, GrandMeister 36, GrandMeister Deluxe 40
• Simple and quick-to-install solution for taking the TubeMeister amp in the rack
• The Rack Mounts RM-40 are screwed to the side of the amp and turn your TubeMeister or GrandMeister into a 19 "rack device
• Height: 4 U
• Weight per angle: 250 g
• Made in Germany

Note: Use only in combination with a rack fan (not included). We recommend mounting the fan over the amp.

• Hughes&Kettner GrandMeister Deluxe 40
• Thon Hughes&Kettner Tube/Grandm. 36

• Power: 20 Watt
• 2 Channels
• Preamp tubes: 2x ECC83
• Power Tubes: 2x EL34
• InfiniumTube Life Multiplier technology
• Controls: Master, Reverb, Morph (regulates between US and British sound), Treble, Middle, Bass
• Overdrive: Volume & Gain
• Clean: Tone & Volume
• Speaker Emulated Output: 1x 12" and 4 x 12" voicing options
• Impedance selector switch: 4, 8 and 16 Ohm
• FX Loop with effects level knobs
• Includes footswitch for channel and reverb

• John Petrucci Signature Model
• All-tube
• 3 Channels with five modes
• Power: Class A / B circuit, 100 / 60 W
• 4x 6L6 power tubes
• 5x 12AX7 preamp tubes
• 2x 5-Band graphic EQs - both can be assigned to either a footswitch or a channel
• All-tube spring reverb: Channel 1 + 2 + 3 can be set separately (rear side), and are footswitchable
• All-tube FX loop: Tube buffered and MIDI switchable
• Built-in CABCLONE cabinet simulator with integrated load resistance and headphone output
• Speaker on / off and ground lift switch
• MIDI controllable / programmable
• Slave Out
• Aluminium chassis
• Dimensions (H x W x D): Approx. 24 x 48 x 28 cm
• Weight: 18.5 kg
• Includes a new 3 x 3, 6-button footswitch and cover
• Made in the USA

Channel 1:

• Mark IIC+ Clean
• Independent Gain, Treble, Mid / Boost, Bass, Presence, Reverb (rear side)
• Master and toggle switches for assigning the dual 5-band graphic EQs (EQ1 or EQ2 on / off, or footswitchable)

Channel 2:

• Legendary Mark IIC+ Lead or Shred mode
• Independent gain with pull function: Gain Boost, Treble, Middle, Bass, Presence with pull function: Frequency Shift, Reverb (rear side)
• Master and toggle switches for assigning the dual 5-band graphic EQs (EQ1 or EQ2 on / off, or footswitchable)

Channel 3:

• Legendary Mark IIC+ Lead or Shred mode
• Independent gain with pull function: Gain Boost, Treble, Middle, Bass, Presence with pull function: Frequency Shift, Reverb (rear side)
• Master and toggle switches for assigning the dual 5-band graphic EQs (EQ1 or EQ2 on / off, or footswitchable)

• Class-A circuit with power reduction
• 1 Channel
• Power: 5W - can be reduced to 0.1W or 1W
• Preamp tube: 12AX7
• Power tube: EL84
• Controls for bass, treble, volume
• Speaker output: 8 or 16 Ohms
• 6.3 mm jack input
• Robust metal housing
• Dimensions (W x H x D): 205 x 127 x 140 mm
• Weight: 3.2 kg

• Power: 50 W
• 2 Channels
• Power amp tubes: 2x EL-34
• Tube preamp: 3x 12AX7
• 2 Master volume controls and 2 gain controls
• EQ: Bass, Middle, Treble & Presence
• Clean Channel: 3-Way bright switch
• Line Out with level control
• Ultra Transparent Series FX Loop
• 4, 8 & 16 Ohm impedance switch
• Custom USA transformers
• Dimensions (D x W x H): 222,36 x 609,6 x 254 mm
• Weight: 15.2 kg
• 1-Way foot switch with LED included
• Made in the USA

• Big KT66 tube sound with a defined midrange that asserts itself in the mix
• Channels: 1
• Power: 50 watts
• Power scaling from 50 watts down to 1 watt without loss of sound
• Footswitchable boost
• Preamp tubes: 2 x 12AX7
• Power amp tubes: 2 x KT66
• Controls: Gain, Volume, Bass, Middle, Treble, Power, Boost Level
• Switch: Boost
• Speaker outputs: 8 and 16 ohms (3 x 6.3 mm jack)
• Input: 6.3 mm jack
• Foot switch connection: 6.3 mm jack
• Dimensions (W x D x H): 432 x 191 x 248 mm
• Weight: 12.7 kg
• Includes footswitch
• Made in USA

Bundle offer comprising

• Tube Head
• Preamp based on the classic JCM 800 2203
• 20 Watts with power reduction to 5 watts
• Tubes: 2x ECC83, 1x ECC83 (Phase Splitter), 2x EL34
• Controls: Preamp and Master Volume, Treble, Mid, Bass and Presence
• 1 Channel with high and low sensitivity inputs
• DI out
• Serial FX loop
• Dimensions: 510 x 240 x 240 mm
• Weight: 9.7 kg
• Suitable case: Art.501854 (not included in delivery)

• Case
• Suitable for Marshall Studio Classic SC20 (Art.457019) and Marshall Studio Vintage SV20H (Art.457091)
• With 2 fixing straps and 1 shoulder strap
• Made of coated 6.5 mm birch multiplex wood
• 22 x 22 mm Aluminium edge
• Min. 10 mm foam padding
• 2 Small spring-loaded butterfly latches
• 1 Strap handle
• Small steel ball corners
• Rubber feet 25 x 11 mm
• Outer dimensions (W x D x H): 569 x 300 x 310 mm
• Weight: 5.8 kg
• Colour: Phenolic resin brown
• Made in Germany

Bundle offer comprising

• Guitar Amp Head

Since the amps with the unconventional colour returned, they have been fighting for their niche in a hotly contested market with great success. Just like in the past when countless stars used these amps, Orange builds amplifiers with an unmistakable sound for people who know exactly what they want.

The AD30HTC is an amp head with pure tube sound in the classic Class A circuit (with 4 El84 amp tubes), which guarantees harmonious sounds with an impressive spectrum. The "TC" stands for "twin channel", where a lead channel available, ensuring sustain rich sounds even at lowest volume.

Separate tone controls for each channel allow flexibility, although it would be difficult to elicit lousy sounds from this amp head! 30 W Class A power is loud enough for most applications.

• Power: 30 Watt
• Class A amplifier technology
• 2 Channels
• Master volume, bass, treble, middle and gain control per channel
• 4 EL 84 Power amplifier tubes
• 4 ECC83 Preamp tubes
• Size: 55 x 24 x 24 cm
• Weight: 18 kg

• Flight Case For Guitar Amplifiers
• Suitable for diverse orange heads: AD 30HTC / -50H / -140HTC / Retro 50H / 30H Rocker / OR-50H / -80H / -120H / TH30H / CS50 Custom Shop
• 7mm Birch multiplex (with orange PVC coated)
• 30 x 30 mm Aluminium edges
• 2x Medium sprung butterfly latches
• 2x Hinged handle medium
• Medium steel corners
• Upholstered with 10 mm foam
• Overall dimensions (W x H x D): 617 x 335 x 307 mm
• Weight: 7.75 kg
• Made in Germany

Synergy is a modular principle - the preamp modules are interchangeable and the amp can be thus tailored specifically to your unique sound ideas.

• Developed especially for the Synergy System
• Power: 50 W
• 2 Module slots
• 4 Channels (when 2 modules are used)
• Tube assembly: 2x 6L6, 3x 12AX7
• Controls: Presence, Density, Master Volume
• MIDI compatible
• Effects loop
• Impedance control for speaker outputs
• XLR DI output
• Dimensions: 64.1 x 25.4 x 25.4 cm
• Weight: 19.1 kg
• Includes a 4-way switch
• Made in the USA

Note: Modules are not included.

• Recording Amp
• 2 Channels
• Power: 10/25 W (switchable)
• Power amp tubes: 2x EL84
• Preamp tubes: 6x 12AX7
• Channel 1: Clean, fat and crunch mode with multi-Watt power switch
• Controls: Gain, Treble, Mid/Boost, Bass, Presence, Reverb and Master
• Channel 2: Mark IIC+ mode, Mark IV mode and Xtreme mode with multi-Watt power switch
• Controls: Gain, Treble, Middle, Bass Presence, Reverb and Master
• 5-Band graphic EQ
• Mesa Dyna-Watt technology
• Built-in CabClone: Speaker simulation (closed/opened) with integrated load resistor
• Headphone output
• Speaker on/off
• Ground-Lift switch
• Spring reverb separately adjustable for each channel
• Tube-buffered FX loop
• Footswitch connector (channel & EQ)
• Dimensions (H x W x D): 203 x 355 x 221 mm
• Weight: 7.5 kg
• Includes footswitch and cover
• Made in USA

• Power: 100 W
• 2 Channels
• Preamplifier tubes: 3x ECC83
• Power amplifier tubes: 4x EL34
• 1 Jack output
• Input Gain (Push/Pull: Rhythm Clip)
• Lead Master
• Output Master
• Treble
• Middle
• Bass
• Presence
• Pentode/Triode switching
• FX Loop
• DI Out
• Dimensions (W x H x D): 750 x 230 x 310 mm
• Weight: 22.1 kg
• Foot switch (channel selection) included
• Matching cover: Art.150488 (not included in delivery)

• 3 Channels
• Power: 50 Watts
• Preamp tubes: 7x JJ ECC83S (12AX7)
• Power tubes: 2x EL34
• Controls: Volume, Gain, Low, Mid, and High EQ
• With global presence and resonance control for all 3 channels
• Channel 1 and 2 has shared volume and gain with low, mid, and high controls
• Effects loop
• 2 Speaker outputs with impedance switches - 4, 8 and 16 Ohms
• Headphone output
• Weight: 11.4 kg
• Dimensions (H x W x D): 21.6 x 50.8 x 30.4 cm
• Colour: Black
• Incl. foot switch

• 4 Channels: Clean, Crunch I, Crunch II, Lead
• Power: 60 W
• Full tube design - no semiconductors in the signal path
• Preamp tubes: 6 X Engl ECC83 / 12AX7
• Power tubes: 2x Engl EL34
• 2 Tube-driven FX loops with separate balance controls
• Noise Gate with adjustable threshold (footswitchable)
• Engl Power Tube Monitor
• MIDI in / MIDI thru
• Engl MIDI foot controller phantom power switch
• MIDI Channel Assignment and Controller Enable Switch
• Write / Copy (for MIDI programming)
• All switching functions MIDI programmable (excluding Power and Stand By)
• S.A.C.: Serial Amp Control port
• Sound Switching options: Input Lo / Hi, Bright, Preshape, Contour (Clean, Crunch I), Mid Le./Bo., Depth Boost, Gain Lo / Hi, Contour (Crunch II, Lead), Rough / Smooth
• Controls: Gain (separate for each channel), Bass, Mid Lean, Mid Bold, Treble (Clean, Crunch I), Bass, Middle, Treble, Tone Balance (Crunch II, Lead), Volume (separate for each channel), Presence A, Presence B, Master A, Master B
• Controls (rear side) for Noise Gate Threshold Level, FX Loop I Balance, FX Loop II Balance
• Outputs: 1 x 4 Ohm, 2 x 8 Ohm, 2 x 16 Ohm, 1 x 16 Ohm
• Line out
• Dimensions (W x H x D): 71 x 27 x 29 cm
• Weight: 21 kg
• Made in Germany

• Power: 5 W
• Power Attenuator: 5 W, 1 W, 0.1 W
• 2 Channels
• Morph control for continuous fading between US and British sound characters
• Preamplifier tubes: ECC83
• Power amplifier tubes: 12BH7
• Output with speaker simulation for 1x 12" or 4x 12" sound character - can also be used as headphone output
• Line (AUX) input: 6.3 mm jack
• FX loop with switchable level
• 1 Speaker output for 8 Ohm guitar speaker
• Dimensions (W x H x D): 446 x 232 x 197 mm
• Weight: 8.0 kg
• 2-Way foot switch (FSB102A) for Channel/Reverb included

• All-tube
• Power: 30 W
• Preamp tubes: 3 x 12AX7
• Power tubes: 4 x EL84
• 4 Inputs: Normal (Hi / Lo) Top Boost (Hi / Lo)
• Controls: Master Volume, Master Tone Cut, Tremolo Depth, Tremolo Speed, Reverb Level, Top Boost Bass, Top Boost Treble, Top Boots Volume & Normal Volume
• FX loop
• Dimensions: 705 x 266 x 284 mm
• Weight: 18.8 kg
• Compatible footswitch: Vox VFS2 (Art.165749 - not included)