Delay & Echo Pedals

• Analogue delay
• Max. delay time: 1.2 Seconds
• Sound of the original carbon copy and the bright version in one pedal
• Adjustable delay time modulation
• Tap tempo function
• Tap tempo subdivisions
• 2 Programmable presets
• True bypass
• Mix, rain, delay, speed ??and width controls
• Bright control button to activate the bright mode
• Tap div control button to select the tap tempo subdivision (dotted 8th notes, triplets, and sixteenths)
• Mod control to enable delay time modulation
• Internal line level/ instrument level DIP switch
• Internal control for guitar/ line level input
• Internal dry kill switch for "wet only" output
• Effect foot switch
• Tap beat foot switch
• Status LEDs
• Tap division LED
• Metal housing
• 6.3mm Mono jack input/ output
• 6.3 mm Jack expression control input
• Power supply with 9 V battery or via 9 V DC power supply (2.1 mm x 5.5 mm power connection, polarity (-) inside, not included)
• Dimensions (L x W x H): 124 x 92 x 54 mm
• Weight: 700 g

• Two independent 3 seconds delays
• 10 Stereo or mono delays
• "Instant program change" - real-time access via 10 buttons
• MIDI or expression pedal
• Tap tempo and MIDI clock sync
• 27 User presets, unlimited MIDI
• True bypass
• 12 sec. Loop
• Input/ output switchable between guitars and line level
• "USB port for OS updates"
• Dimensions (W x H x D): 19.05 x 5.38 x 12.19 cm
• Weight: 975 g
• Including power adapter

• Delay with analogue operation
• Warm vintage delay with band-based echo sounds
• New pedalboard-friendly metal case
• True bypass
• Slider for delay, feedback and blend
• Bypass footswitch
• Status LED
• 6.3 mm mono jack input and output
• Power supply via 9 V battery or optional 9 V DC power adapter (Dunlop ECB003) 2.1 mm x 5.5 mm barrel connector, polarity (-) inside (not included)
• Current consumption: 16 mA
• Dimensions (L x W x H): 104 x 61 x 53 mm
• Weight: 350 g

Note: Register your product at www.w-distribution.de/Warranty to extend the warranty to 4 years.

• 5 Special algorithms (programs) consisting of different combinations of reverse delay and reverb effects
• Program 1: Reverse Delay in Reverse Reverb
• Program 2: Reverse Delay in Ocatve Up Reverb
• Program 3: Reverse Delay in Octave Down Reverb
• Program 4: Reverse Reverb in Forward Reverb
• Program 5: Pitch Delay into Pitch Delay
• 2 DSP chips connected in series, with individual analog feedback paths
• Both feedback paths build on each other and interact with each other
• Both paths Individually adjustable via Feedback and Regen controls
• Modulation can be added to each program additionally
• Tap tempo to adjust delay/reverb time
• "Momentary" function - Dive/Rise
• Hold Tap tempo switch for pitch up/down effects
• Natural decay of effects after pedal is deactivated
• Controls: Feedback, Regen, Mod, Mix, "X", Time, Tone, Program
• Footswitch: Bypass/Tap
• Top-mounted input and output
• Muted green case, with cream, orange, brown and dark green artwork
• Power supply: 9-Volt DC, center negative, 300mA minimum
• Designed and built in the USA

Boss RE-2 Space Echo Delay/Reverb; Effects Pedal for Electric Guitar; legendary Space Echo Tape-Delay & Spring Reverb sound in a compact pedal; 11 Delay Modes; Controls: Echo, Reverb, Intensity, Tone, Repeat Rate, Wow & Flutter; Switches: Mode Rotary Switch; LED: Effect On; Footswitches: Effect Bypass (Set Tempo: Hold); Connections: Input A(Mono) & B (2 x 1/4" Jack), Output A(Mono) & B (1/4" Jack), CTL/EXP (1/4" TRS-Jack); Power Supply connector: Barrel Connector 5.5 x 2.1 mm, center negative; Current Draw: 75 mA; powered by a 9 V Battery or a 9 V DC Power Supply (not included); suitable optional Power Supply: Item no. #409939; Dimensions (W x D x H): 73 x 129 x 59 mm (2,87" x 5,08" x 2,32"); Weight: 450 g (0,99 lbs)

• Delay and Reverb
• With a delay side and a reverb side with the main basic controls as well as a Mix knob
• In addition, the Cirrus offers 3 different delay and reverb modes, each with a dynamic function controlled by the attack and Sensitivity Control to allow for funky, celestial sounds
• Controls: Delay, Reverb, Time, Decay, Damp, Sens, Repeats, EXP Mode
• Switches: Reverb Mode, Delay Mode, Subdivision, Effect Order
• Foot switch: Effect bypass, tap tempo
• Input and output: 6.3 mm jack
• Expression: 6.3 mm stereo jack
• Effect Loop: 2x 6.3 mm jack
• Power adapter connector: Hollow socket 5.5 x 2.1 mm, negative pole inside, current consumption: 220 mA
• Power supply via 9 V DC power adapter (not included - suitable power supply: Article no. 409939)
• Dimensions (W x D x H): 90 x 120 x 62 mm
• Weight: 420 g
• Made in Germany

Note: Battery operation not possible.

One of the most popular analog delays, for AD's it has an unusually long maximum delay time of 550 milliseconds. If the modulation of the integrated chorus/vibrato effect is set, the sound comes close to the legendary old tape echos. But even more experimental floating sounds of more intense modulation are one no problem for the Memory Man. Ideal for fans of classic delay sounds.

• Warm analog echo to 550 ms
• With chorus and vibrato
• True bypass
• Floating sounds
• Dimensions (W x D x H): 120 x 145 x 64 mm
• Including power supply (24DC-100)

Yuer RF-10 Series Digital Delay effect pedal for electric guitar, digital delay pedal from the RF-10 series, digital delay with analogue sound in a compact format, delay time range: 25 ms - 600 ms, true bypass, controls for time, level, repeat, status LED, bypass footswitch, aluminium housing, 6.3 mm mono jack input / output, power supply via optional 9V DC power supply (not included), 2.1 mm x 5.5 mm barrel plug, polarity (-) center, battery operation is not supported, current draw 12 mA, dimensions (L x W x H) 93 x 52 x 42 mm / 3.66" x 2.10" x 1.66", weight 130 g / 0.29 lbs

• Deep Blue Delay - ambient delay pedal
• Factory BJF design
• Controls for: Level, delay, repeat
• Delay time: 25-450 ms
• Power consumption: 32 mA
• Factory made

• Delay & reverb effects in a pedal
• 3 Delay modes: 70s analog, 60s tape and 80s digital
• Delay level, time and repeat
• Tap tempo with tap subdivision
• 3 Reverb modes: Spring, plate and hall
• Plate reverb with shimmering effect
• True bypass
• TRS input - effect loop connection via insert or Y cable
• Input level switch (-10 dB / + 4 dB)
• USB port for firmware updates
• Controls: Delay level - subdivision - repeat - reverb level - decay
• Switch: Delay mode (70's / 60's / 80's) - reverb mode (spring / plate / hall) - input level (-10dB / + 4dB) - D & R routing (serial / parallel)
• Effect on LED
• Bypass footswitch
• Connections: Input (6.3 mm stereo jack) - stereo output (2x 6.3 mm jack) - power supply connector (female connector 5.5 x 2.1 mm - negative pole inside)
• Power supply via 9 V DC power supply (not included, available under Article Nr. 409939)
• Dimensions (W x D x H): 115 x 105 x 57 mm
• Weight: 420 g

Note: No battery operation possible.

• Delay and Looper
• Digital operation
• 12 Effect Types
• Fully functional looper
• Up to 3 seconds delay time
• TAP tempo
• Stereo outputs
• 13 Delay presets
• Looper has up to 16 minutes recording time
• Unlimited number of overdubs
• Undo/Redo function
• Tails function
• Connection for external foot switch
• Includes power supply unit

• Digital delay
• Delay time: 40 - 750 ms
• Controls for sustain, volume, and delay
• Age mode with "aged" repeats
• Bypass foot switch
• Internal mono stereo switch
• True bypass and optional trails bypass
• Status LED
• 100% Analogue dry path
• 6.3 mm stereo jack input/ output - can be used as mono with normal instrument cables
• 6.3 mm tap-tempo input
• Metal housing
• Power consumption: 240 mA
• Incl. power supply

Note: no battery operation possible.

• Modulated tape echo
• Modulation signal status LED
• Controls for speed, depth, time, rain and level
• Metal housing
• True bypass
• Status LED
• Bypass foot switch
• 6.3 mm Mono jack input/ output
• Power supply via 9 V battery or 9 V power supply (not included, suitable power supply, e.g. Art. 409939)
• Power consumption: 45 mA
• Dimensions (L x W x H): 112 x 68 x 51 mm
• Weight: 277 g

• Delay
• Digital operation
• Delay time: 20 - 1200 ms
• From richly modulated echoes to wild soundscapes
• Delay time modulation
• Delay, Fuzz, Master, Feedback, T Time, Speed and Depth controls
• Toggle switch to mute the dry signal
• Toggle switch to select the modulation waveform: sine / square
• 6.3 mm Mono jack input / output
• True bypass
• Bypass footswitch
• Status LED
• Metal housing
• Power supply via 9 V battery or 9 V DC power supply (2.1 x 5.5 mm coaxial connection, polarity (-) inside, current consumption 5.8 mA - not included)
• Dimensions (L x W x H): 150 x 116 x 64 mm
• Weight: 510 g
• Handmade in New York City, USA

Note: Register your product at www.w-distribution.de/Warranty and extend the warranty to 4 years.

• Analog delay with triangle and square wave modulation
• With rate and depth controls for chorus, vibrato and sweeps
• FX Loop
• Tap tempo
• Delay time: up to 550 ms
• Connection for an expression pedal
• Dimensions (WxDxH): 120 x 145 x 64 mm
• Included: Power supply (95DC-200BI)

• Analogue delay
• Provides a dark band echo-like sound
• Control for Volume / Feedback / Tone/Mix / Time
• Switch for random modulation (band effect)
• Compression switch
• True bypass
• LED status display
• Input and output: 6.3 mm jack
• Power supply connection: Hollow plug socket 5.5 x 2.1 mm - 9 V, negative pole inside (power consumption 60 mA - power supply not included)
• Dimensions (D x W x H): 98 x 118 x 52 mm
• Weight: 361 g
• Made in Quebec, Canada

Note: Battery operation is not possible

Bundle offer comprising

• Effects Pedal
• Delay and reverb
• Digital operation
• True Bypass
• Tap tempo function
• Controls for Level / Mix, Time / Tone and FB / Decay
• Toggle switch to select between Delay and Reverb mode
• Bypass foot switch
• Metal housing
• Mono jacks: 6.3 mm input / output
• Power supply with 9 V DC power supply, 2.1 x 5.5 mm barrel connector, negative polarity inside (not included - battery operation is not supported)
• Current consumption 160 mA
• Dimensions (L x W x H): 93.5 x 42 x 52 mm
• Weight: 146 g

• Protective Cover
• Suitable for Mooer Micro series effect pedals with a large knob configuration
• Suitable for most effect pedals with a housing size around 92 x 37 x 37 mm
• With pedal plate for mounting on pedal boards of any manufacturer
• Protects effect pedals from dirt and weather conditions
• Protects the settings from unintentionally shifting
• Mounts effect pedals securely on almost all pedal boards
• No permanent modifications required
• Includes universal pedal mounting plate type K and silicone adhesive pad