Distortion Pedals

• Overdrive pedal
• 2 Channels with separate controls
• Both channels offer a cranked tube amp sound with lots of sustain
• Channel 1: Low gain overdrive, which is designed to create tube amp “early break-up” overdrive for rhythm tone with tone clarity
• Channel 2: Overdrive with medium gain, which is designed to capture the creamy and rich sound of an amp-like distortion crunch
• Controls - Channel 1: Gain, Volume, Tone
• Controls - Channel 2: Gain, Volume, Tone
• LEDs: Channel Status 1, Channel Status 2
• Footswitch: Channel 1 bypass, Channel 2 bypass
• Input (6.3 mm jack)
• Output (6.3 mm jack)
• Power adapter connector: DC adapter, 5.5 x 2.1 mm, negative polarity inside
• True bypass
• Power consumption: 25 mA
• Powered via a 9V DC power supply (Not included - Suitable power supply available under Article Nr 409939)
• Dimensions (W x D x H): 119 x 94 x 34 mm
• Made in Greece

Note: Battery operation is not supported.

Bundle offer comprising

• Effect Pedal
• Dual Overdrive
• The hybrid approach provides the best of the analog and digital world
• The JFET stage provides exceptional response and dynamic interaction with your guitar while the incredibly powerful SHARC DSP provides detailed complexity and responsiveness
• Via Strymon Midi-Exp cable (Art.448709 - not included) you can store and load presets
• Control knobs per channel: Drive, Level & Tone
• Switches: GE/Texas/Treble, 2stage/Hard/JFET, Configure and Bright
• Expression pedal input
• True bypass
• Dimensions (D x W x H): 11.4 x 10.2 x 4.4 cm
• Incl. 9 V DC mains adapter
• Designed and made in USA

• Protective Cover
• Suitable for medium size Strymon effect pedals
• Suitable for most effect pedals with a housing size around 115 x 100 x 47 mm
• With pedal plate for mounting on pedal boards of any manufacturer
• Offset of mounting holes (W x D): 76 x 96 mm
• Protects effect pedals from dirt and weather conditions
• Protects the settings from unintentionally shifting
• Mounts effect pedals securely on almost all pedal boards
• No permanent modifications required
• Includes universal pedal mounting plate type J and silicone adhesive pad

• Overdrive + distortion effect
• Enlarged gain range and voice control, clean boost and high-gain distortion
• Controls: Gain 1, gain 2, 3-band EQ, voice, volume
• Push buttons: Bypass, gain 2
• Switches: Boost toggle switch to adjust gain 1 control from clean to medium, crush toggle switch to add an additional post-EQ clipping level
• LED: Effect on
• Footswitch: Effect bypass, gain 2
• Input: 6.3 mm jack
• Output: 6.3 mm jack
• Mains adapter connection: Hollow female plug: 5.5 x 2.1 mm, negative pole inside
• Power supply via 9 V DC mains adapter - not included in the delivery, suitable mains adapter: article no. 409939
• Dimensions (H x W x D): 5.4 x 9.2 x 11.6 cm
• Made in USA
• Note: Battery operation is not supported

• Fuzz
• Reissue of the original Version 1 Big Muffs from 1969
• Creamy, violin-like sustain
• Controls: Sustain, Volume, Tone
• LED: Effect On / Off
• Footswitch: Effect Bypass
• Connections: input (6.3 mm jack)
• Output (6.3 mm jack)
• Power supply connection (coaxial socket 5.5 x 2.1 mm, negative pole inside)
• Power consumption: 2.2 mA
• Power supply via 9 V battery or 9 V DC power supply (not included, matching power supply available under Article Nr. 409939)
• True bypass
• Compact die-cast housing
• Dimensions (W x D x H): 70 x 114 x 53 mm

Bundle offer comprising

• Electric Guitar Effect Pedal

Tube amplifiers enable a wide range of awesome sounds: from soft jazz over the hardest rock all the way to melancholic blues. A tube amp enhances the power of expression of a guitar by highlighting the fine nuances of different guitars, pickups and playing styles. With this pedal, you come very close to the sound of a real tube amp. The BD-2 is also ideal for practising at home as it creates the necessary tube distortion even at lower volumes. That will be a relief for your neighbours.

Back to the essentials

If a no-frills, earthy blues and rock sound is desired, you've come to the right place with the BD-2 Blues Driver. Slight distortion, fat overdrive and soft, silky sustain. The distortion levels can be set with Gain. The setting range covers slightly distorted to the hardest overdrive. Tone Control allows you to set a variety of classic sounds. Overall Level enables the adjustment of overall volume, regardless of the distortion.

• Bluesy, natural, vintage tube amp sound
• Reacts to every nuance and volume change
• Controls: Level, Tone and Gain
• Connections: Input and output
• Current consumption: 13 mA
• Power supply with a 9V battery or a 9V DC power supply (coaxial connection - negative pin inside - not included - for example, article 409939.)
• Dimensions (W x D x H): 73 x 129 x 59 mm
• Weight: 400 g

• Protective Cover
• Suitable for Boss Compact series effect pedals in the prominent standard size
• Suitable for most effect pedals with a housing size around 120 x 65 x 55 mm
• With pedal plate for mounting on pedal boards of any manufacturer
• Offset of mounting holes (W x D): 55 x 111 mm
• Protects effect pedals from dirt and weather conditions
• Protects the settings from unintentionally shifting
• Mounts effect pedals securely on almost all pedal boards
• No permanent modifications required
• Includes universal pedal mounting plate type E, silicone adhesive pad, and replacement screws

• Bass Distortion
• For aggressive full and fat sound
• With additional 4-band graphic EQ
• High pass control from 100 - 1000 Hz, High Drive, High Level, Low pass from 50 - 500 Hz, Low Comp, Low Level
• Input: 6.3 mm jack
• Output: 6.3 mm jack
• Parallel output: 6.3 mm Jack
• Direct output: XLR
• Connection for 9 V DC power supply with negative pole inside (not included)
• Dimensions: 120 x 94 x 46 mm
• Weight: 320 g

• Flexible metal distortion pedal
• Inspired by one of THE classic heavy metal pedals
• Successor of the WURM with improved electronics
• Silent circuit & more compact format
• Controls: Volume, Terror, Highs, H-Mids, L-Mids, Lows - internal: Highs Q, H-Mids Q, L-Mids Q, Lows Q
• Switch: EQ style switch (KMA/HM-II/Both).
• Internal switch: Input Buffer (On/Off)
• LED: Effect On
• Footswitch: Effect On
• Input: 6.3 mm jack
• Output: 6.3 mm jack
• Mains adapter connection: Hollow female plug 5.5 x 2.1 mm, negative polarity inside
• Power consumption: 50 mA
• Power supply via 9 V DC mains adapter is not included in delivery, suitable mains adapter: article no. 409939
• True bypass
• Dimensions (W x D x H): 74 x 128 x 60 mm
• Weight: 350 g
• Handmade in Germany

Note: Battery operation not supported.

• Distortion
• Controller for: Level, low, high and dist
• Advanced sound dynamics
• Completely digital model
• Natural compression
• Open sound character
• Very low noise at high level
• Boss Multi-Dimensional Processing Technology (MDP) based on custom DSP
• Battery operation possible
• Suitable power supply: Article Nr. 102842 (not included)

• Waza series
• Analog distortion
• For guitarists looking for the sound of a fully wound stack
• 2 Levels of gain guarantee enough distortion and sustain, rich bass and assertive mids
• Standard mode with improved MT-2 sound with more clarity and less noise
• Custom mode for more high gain with even wider sound, dynamics and bass
• 3-Band equalization
• Premium buffer for bypass
• Compact, very robust construction
• Battery and power supply operation possible (not included)
• Dimensions: 129 x 73 x 39 mm
• Weight: 450 g
• Made in Japan

• Preamp
• Designed to provide the same Dumble tube amp sound as the 1st channel of the Double Gladio, but in a smaller and more compact size and with an additional Clean control to achieve a more authentic classic Texas blues sound
• Controls: Gain, Volume, Clean, Tone
• Switch: Comp
• LED: Effect On
• Footswitch: Effect Bypass
• Input: 6.3 mm jack
• Output: 6.3 mm jack
• Mains adapter connection: Hollow female plug 5.5 x 2.1 mm, negative pole inside
• Power consumption: 30 mA
• Power supply via 9 V DC mains adapter (suitable mains adapter art. 409939, not included)
• Dimensions (W x D x H): 67 x 122 x 39 mm
• Weight: 250 g
• Handmade in Italy

Note: No battery operation possible

Bundle offer comprising

• Electric Guitar Effect Pedal

Tube amplifiers enable a wide range of awesome sounds: from soft jazz over the hardest rock all the way to melancholic blues. A tube amp enhances the power of expression of a guitar by highlighting the fine nuances of different guitars, pickups and playing styles. With this pedal, you come very close to the sound of a real tube amp. The BD-2 is also ideal for practising at home as it creates the necessary tube distortion even at lower volumes. That will be a relief for your neighbours.

Back to the essentials

If a no-frills, earthy blues and rock sound is desired, you've come to the right place with the BD-2 Blues Driver. Slight distortion, fat overdrive and soft, silky sustain. The distortion levels can be set with Gain. The setting range covers slightly distorted to the hardest overdrive. Tone Control allows you to set a variety of classic sounds. Overall Level enables the adjustment of overall volume, regardless of the distortion.

• Bluesy, natural, vintage tube amp sound
• Reacts to every nuance and volume change
• Controls: Level, Tone and Gain
• Connections: Input and output
• Current consumption: 13 mA
• Power supply with a 9V battery or a 9V DC power supply (coaxial connection - negative pin inside - not included - for example, article 409939.)
• Dimensions (W x D x H): 73 x 129 x 59 mm
• Weight: 400 g

• Protective Cover
• Fits Boss Compact Series effect pedals in the familiar standard size
• Suitable for most effect pedals with housing dimensions of approx. 120 x 65 x 55 mm
• With base plate for mounting on Rockboard pedalboards with click system
• Distance of QuickMount mounting holes (W x D): 55 x 111 mm
• Protects effect pedals from dirt and weather
• Protects settings from unintentional adjustment
• Mounts effect pedals securely on RockBoard pedalboards
• No permanent modifications required
• Includes silicone adhesive pad and spare screws

• Distortion
• Waza Craft Series - reissue of the legendary HM-2 Heavy Metal Distortion with WAZA innovation
• Controls: Level, Color Mix (L and H), Dist.
• Switch: Mode (S, C)
• Footswitch: Bypass (Buffered)
• Input: 6.3 mm jack
• Output: 6.3 mm jack
• Power consumption: 30 mA (9 V DC)
• Power supply via 9 V battery or mains adapter (both not included)
• Dimensions (W x H x D): 73 x 59 x 129 mm
• Weight incl. battery: 440 g
• Made in Japan
• Suitable power supply unit: Art. 409939 (not included in delivery)

• Extreme hard rock / heavy metal distortion of the 80s
• Controls: Level, Low, Mid, Distortion
• LED: Effect on
• Footswitch: Effect bypass
• 6.3 mm jack input
• 6.3 mm jack output
• AC adapter connector: Hollow plug socket 5.5 x 2.1 mm, negative pole inside
• Current consumption: 30 mA
• Power supply via 9 V battery or a 9 V DC power adapter (not included, suitable power adapter: Article no. 409939)
• Dimensions (W x D x H): 70 x 123 x 54 mm
• Weight: 330 g

• Fuzz
• Completely unique fuzz sound
• From simple distortion to gated and oscillating fuzz sounds
• Controls for level, filter, fuzz, density and bias
• Gate / oscillating toggle switch to select between gated and self-oscillating fuzz
• Bypass footswitch
• Status LED
• Metal housing
• Power supply via 9 V battery or 9 V DC power supply (not included - 2.1 x 5.5 mm hollow plug, polarity (-) inside)
• Current consumption: 2 mA
• Input / Output: 6.3 mm Mono jack
• Dimensions (L x W x H): 121 x 99 x 53 mm
• Weight: 370 g
• Handmade in New York City, USA

Note: Register your product at www.w-distribution.com/Warranty and extend the warranty to 4 years.

Harley Benton MiniStomp Big Fur; Fuzz effect pedal for electric guitar, rich and creamy fuzz tone inspired by the classic Big Muff pedal, true bypass for eliminating signal interference when switched off, solid metal chassis, Flexible tone control, volume control, Sustain control, on/off switch with status LED indicator, Jack input & output, Power consumption 20mA, Power input: 9V by power adaptor type - center negative (not included), dimensions 92mmx38mmx32mm, weight 133gram

• Fuzz
• True-to-detail replica of the Ram's Head Muff of the early 70s
• Rich sustain and harmonic overtones
• Original circuit board in '3003' style
• All Carbon Composition 1/2 Watt 'Bown Tone' resistors
• Mullard 'Tropical Fish' capacitor clipping sections
• Volume, Tone, Sustain controls
• Bypass footswitch
• Status LED
• Heavy-duty folded steel metal cabinet (full-size)
• True hard-wire bypass
• Input: 6.3 mm mono jack
• Output: 6.3 mm mono jack
• Mains adapter connection: Hollow female plug 5.5 x 2.1 mm, negative polarity inside
• Power supply via 9 V battery or 9 V DC mains adapter are both not included in the delivery
• Current consumption: 5.5 mA
• Dimensions (L x W x H): 172 x 138 x 55 mm
• Weight: 992 g
• Made in USA

Note Register your product at www.w-distribution.de/Warranty and extend the warranty to 4 years.

• Distortion
• The legendary Rat distortion, heard on countless rock recordings since the 80s, in a compact pedalboard-friendly format
• Controls: Distortion, Filter, Volume
• LED: Effect On
• Footswitch: Effect Bypass
• Input: 6.3 mm jack
• Output: 6.3 mm jack
• Power supply connection: Barrel connector 5.5 x 2.1 mm, negative polarity inside
• Power supply via 9 V DC mains adapter (not included in delivery, suitable mains adapter: Art.409939)
• Dimensions (W x D x H): 51 x 86 x 57 mm
• Weight: 230 g

Note: Battery operation is not supported.

• Fuzz
• Combines the singing, dynamic and central germanium-fuzz sound with rough, round muff-style fuzz
• A three-way toggle switch gradually increases the bass
• Extremely useful for switching between single-coil and humbucker-equipped guitars
• Controls: Level, Tone, Gain
• Switch: 3-Way bass response
• LED: Effect On
• Footswitch: Effect Bypass
• Connections: Input (6.3 mm jack)
• Output (6.3 mm jack)
• Power adapter connection (female connector 5.5 x 2.1 mm, negative pole inside)
• Power consumption: 8 mA
• Power supply via 9 V battery or 9 V DC power supply (not included, matching power supply available under Article Nr. 409939) True Bypass
• Dimensions (W x D x H): 60 x 110 x 30 mm
• Weight: 250 g

One of the first good sounding distortions ever - thanks to soft clipping, a truly harmonious, never unpleasant yet biting sound is achieved. Is very well suited to elicit from tube amps the last bit of bite (from traces of sawtooth to delightful tube overdrive). In such way did Ozzy's favourite guitarist - Randy Rhoads - run a part of his black tower.

• A real alternative to the typical British or West Coast sounds
• Bypass switch with operating LED
• Controls for output and distortion
• Powered via battery or external power supply

• Overdrive
• TrueTone Series
• Sound control: Level, Voice, Drive
• 3-Band EQ control: Low, Mid, High
• Size (HxWxD): 38 x 87 x 118 mm
• Operates with 9V battery (Article Nr. 132579) or power supply (Article Nr. 409939) - both not included