Distortion Pedals

• Rock Distortion
• Characteristic tone of TightRock with expanded tonal spectrum for fatter and darker sounds
• Integrated switchable SideTrak effect loop
• Integrated noise gate
• LED illuminated controller (when using mains adapters)
• Magnetic battery compartment cover for easy access to the battery
• True bypass
• Controls for Tight, Gain, Tone and Volume
• EQ switch for Vintage Tone Stack (Flex EQ)
• Noise Gate Switch
• Gain boost switch
• Recessed EFX loop switch: pre / post
• Battery switch for disconnecting the battery when using mains adapters
• Bypass footswitch
• Status LED
• Metal housing
• 6.3 mm Mono jack input / output
• 6.3 mm Mono jack send / return
• Power supply via 9 V battery or optional 9-18 V DC power supply (2.1 x 5.5 mm coaxial connection, polarity (-) inside)
• Power consumption: 12 mA with battery / 28 mA at 9 V / 45 mA at 18 V with mains adapter
• Dimensions (W x D x H): 93 x 127 x 51 mm
• Weight: 900 g
• Handmade in USA

• Distortion
• Controls: Tone A, Drive A, Tone B, Drive B, Blend (A / B), Output Level
• Blend / Series toggle
• Bass Boost Toggle (On / Off)
• Bypass footswitch
• Jack input and output
• Powered by a 9V battery or a 9V DC power adapter (not included)

There has long been a whole gaping in the BOSS pedal range: No fuzz pedal!

Thanks to Roland/Boss's years of modelling experience (it is the first company to have worked with Digital Modeling, the VG-8 Virtual Guitar System 1995), these three sounds are different from the originals in only one aspect: the price is much lower!

• Fuzz
• 3 Vintage sound modes of the 60s & 70s
• COSM technology
• BOOST control for more distortion and sustain
• Controls: Fuzz, Mode, Level
• Switch: Mode Maestro FZ-1 A/Fuzz Face/Octavia
• LED: Effect On
• Footswitch: Effect Bypass
• Connectors: Input (6.3 mm jack), output (6.3 mm jack), mains adapter Connection: Hollow plug socket 5.5 x 2.1 mm, negative pole inside
• Power consumption: 36 mA
• Power supply via 9 V battery or 9 V DC mains adapter (not included in delivery - suitable mains adapter: art. 409939)
• Dimensions (W x D x H): 73 x 129 x 59 mm
• Weight: 400 g

• V2 in a new design
• Switchable bypass (Buffer or True Bypass) and active bass, midrange, and treble controls for tonal flexibility - whether you're boosting the amp or another pedal, or using the pedal as a standalone overdrive
• Controls: Gain, Level, Treble, Mids, Bass
• Push buttons: Buffer / True Bypass
• Switch: Normal / Hot
• LED: Effect On / Off
• Footswitch: Effect Bypass
• Input: 6.3 mm jack
• Output: 6.3 mm jack
• Power supply connector (coaxial connector 5.5 x 2.1 mm, negative polarity inside)
• Power consumption: 70 mA
• Power supply via 9 V battery or 9 V DC power supply (suitable power supply Art.409939 - not included)
• True bypass
• Dimensions: (W x D x H): 64 x 114 x 38 mm
• Made in USA

Bundle offer comprising

• Analog distortion pedal for electric guitar
• Controls: output distortion, bass, mid, treble
• Status LED
• True bypass
• Sturdy metal housing
• 9V battery or separately sold 9V DC power supply Articlr Nr 409939 (not included)

• Protective Cover
• Suitable for Electro Harmonix Nano series and MXR effect pedals with standard housing with 1 input and 1 output jack
• Suitable for most effect pedals with housing dimensions of approx. 110 x 60 x 32 mm
• With base plate for mounting on pedalboards of any manufacturer
• Protects effect pedals from dirt and weather influences
• Protects the settings from unintentional adjustment
• Mounts effect pedals securely on almost all pedalboards
• No permanent modifications required
• Includes universal pedal mounting plate type A and silicone adhesive pad

• Overdrive
• Controls: Tone, Volume, Drive
• True bypass
• Dimensions (LxWxH): 13.2 x 7.2 x 5.7 mm
• Powered via 9V battery or 9V power supply (not included, matching power supply available: Art. 409939)

• Has all control elements of the Microtubes X7
• Allows an exact selection of the frequencies to be compressed and saturated
• With 4 additions to the X7 function: 6-band graphic EQ, Impulse Response speaker simulation, Aux Input & Clean Channel
• Controls: High-pass frequency, high drive, high level, low-pass frequency, low comp, low level, master, low shelf, 250 Hz, 500 Hz, 1.5 kHz, 3 kHz, high shelf
• Push-buttons: Low-pass frequency: 50 Hz / 250 Hz / 500 kHz; high-pass frequency: 100 Hz / 500 Hz / 1 kHz, Cab Sim On/Off
• Foot-switch: Bypass effect
• Input: 6.3 mm Jack
• Output: 6.3 mm Jack
• DI Out (XLR)
• USB
• Mains adapter connection: Hollow plug socket 5.5 x 2.1 mm, minus pole inside
• Current consumption: 200 mA
• Power supply via 9 V DC power supply unit (not included in delivery - suitable power supply unit: Article Nr. 409939)
• Dimensions (W x D x H): 125 x 96 x 57 mm
• Weight: 430 g
• Made in Finland

Note: Battery operation is not supported.

• Overdrive
• From the JHS Pedals 3 Series
• Based on the modifications and work with the legendary TS circuitry
• TS 'Strong Mod' in a stand-alone unit
• More clean headroom
• Better usability as boost
• More versatile drive and tone controls and a more 'pleasing' frequency response than standard TS-style pedals
• Two switchable clipping modes (Up (+) for asymmetrical clipping (JHS 'Strong Mod' clipping), Down (-) for symmetrical clipping (standard TS9 / TS808 style))
• True Bypass
• Volume, Tone, Drive controls
• +/- Toggle switch
• Bypass footswitch
• Status LED
• Metal housing
• 6.3 mm mono jack input / output
• Power supply via 9V DC mains adapter (2.1 mm x 5.5 mm hollow female plug, polarity (-) inside - not included)
• Battery operation is not supported
• Power consumption: 12 mA
• Dimensions (L x W x H): 112 x 60 x 31 mm
• Weight: approx. 210 g

Note: Register your product at www.w-distribution.de/Warranty and extend the warranty to 4 years

• Sounds à la Jimi Hendrix, Santana and Pink Floyd
• True bypass
• Long, creamy sustain
• Fat fuzz sound
• Unobtrusive treble
• Transparent bass
• Dimensions (W x D x H): 140 x 173 x 76 mm
• Power supply with 9 V battery or 9 V DC power supply (coaxial connection - negative polarity inside - not included, e.g. Article Nr: 409939)
• Made in USA

• "Amp in a Box"
• For electric guitar
• Class-A gain structure
• Cabinet simulator output, also for headphones or recording interfaces
• Low impedance output for connection to the guitar amplifier
• Controls: Volume, Gain, Bite (Tone / Presence)
• Operation via 9 V battery or DC power supply (not included in the scope of delivery, see Art. 409939)

• Overdrive
• Controls for Volume, Drive, Bass and Treble
• True Bypass
• Power consumption: 3.5 mA
• 9 V DC power supply is required (not included, optional power supply under Art.409939)

• Gated Fuzz with wide tonal spectrum
• True bypass
• Controls for Vol, Fuzz, Gate, Mix and Tone
• Mode toggle switch for selecting between 2 silicon transistor combinations
• Low-Toggle Switch for additional Low End Boost
• Bypass footswitch
• Status LED
• Metal housing
• 6.3 mm Mono jack IN / OUT
• Power supply with 9 V battery or via 9 V DC power supply (2.1 mm x 5.5 mm power connection, polarity (-) inside, not included in delivery, e.g. Art. 409939)
• Current consumption: 20 mA
• Dimensions (L x W x H): 126 x 73 x 57 mm
• Weight: 430 g
• Made in USA

Note: Battery operation not possible.

Bundle offer comprising

• Guitar Effects Pedal

The BOSS DS 2 is an enhanced version of the already classic of the genre, the DS 1. It delivers this time - in comparison to the legendary overdrive pedals from BOSS - a considerably rougher and more aggressive distortion, which is clearly oriented towards the British amp stack sound, yet still far away from the earlier rather toneless fuzz distortion of the past. In addition, the DS-2 has a second mode that enables yet more aggressive sounds. You can use both options live, as there is an extra jack for a foot switch with which to switch between modes. Extremely flexible!

• Distortion
• 2 Sound modes for a wide spectrum for distortion
• From distorted riff-rock via earthy rock sounds, up to to singing lead sounds
• Turbo mode can also be activated via an additional footswitch on the remote jack (Foot switch not included)
• Power consumption: 12 mA
• Powered with a 9V battery or a 9V DC power supply (coaxial connector - negative terminal inside - not included in delivery, e.g. Article Nr 409939)
• Dimensions (WxDxH): 73 x 129 x 59 mm
• Weight: 400 g

• Protective Cover
• Fits Boss Compact Series effect pedals in the familiar standard size
• Suitable for most effect pedals with housing dimensions of approx. 120 x 65 x 55 mm
• With base plate for mounting on Rockboard pedalboards with click system
• Distance of QuickMount mounting holes (W x D): 55 x 111 mm
• Protects effect pedals from dirt and weather
• Protects settings from unintentional adjustment
• Mounts effect pedals securely on RockBoard pedalboards
• No permanent modifications required
• Includes silicone adhesive pad and spare screws

• BC108 Fuzz Face Circuit in the MXR Mini Housing
• Original turquoise Fuzz Face Hammertone finish
• True bypass
• Controls for volume and fuzz
• Buffer switch
• Bypass footswitch
• Status LED
• Metal housing
• Input and output: 6.3 mm mono jack
• Power supply via optional 9 V DC power supply, 2.1 x 5.5 mm coaxial connection, polarity (-) inside) (not included)
• Power consumption 2.2 mA
• Dimensions (L x W x H): 90 x 40 x 55 mm
• Weight: 130 g

Note: Battery operation not supported.

Note: Register your product at www.w-distribution.com/Warranty and extend the warranty to 4 years.

Flamma FC07; Overdrive pedal with the legendary TS-style sound; 2 working modes: Warm and Hot; Warm: recreates the sound of tube drive with dynamic response of classic tube amplifier, producing natural and smooth overdriven tone; Hot: With the "tube warmth" sound and takes the drive further with more gain for crunchier tone; Power consumption: 9V, 7mA

• 60's Blackface overdrive sound
• Powerful and clear
• Retains the characteristics of the guitar with great sustain and without unnatural compression
• Simple operation
• Controls: Volume - Gain - Bass - Treble - Saturation (Trimmer)
• LED: Effect On
• Footswitch: Effect On / Bypass
• Connections: Input (6.3 mm jack) - Output (6.3 mm jack) - Power supply connector (coaxial connection 5.5 x 2.1 mm - negative polarity inside)
• Power consumption: 5 mA
• Power supply with a 9 V battery or a 9 V DC power supply (not included, suitable power supply available under Art.409939)
• True bypass
• Dimensions (W x D x H): 70 x 112 x 50 mm
• Weight: 428 g
• Made in Japan

• Distortion
• Perfect for modern metal sounds
• With the clarity, articulation and ultimate distortion to get a sound wall out of the amp
• Two distortion modes for maximum versatility
• Controls: Gain, Volume, Bass, Mid & Treble
• Switch: Open / Tight
• True bypass
• Power consumption: 29 mA
• Power supply with 9 V battery or via 9 V DC power supply (2.1 mm x 5.5 mm power connection, polarity (-) inside, not included in delivery, e.g. Art. 409939)
• Dimensions: 63.5 x 114.3 mm
• Made in USA

• Very versatile fuzz based on a triangle style fuzz
• Via the active EQ, it can be adapted to any combination of guitar / amplifier
• Controls: Sustain, Treble, Bass, Volume
• LED: Effect On
• Footswitch: Effect Bypass
• Input (6.3 mm jack)
• Output (6.3 mm jack)
• Power adapter connector (coaxial connection 5.5 x 2.1 mm, negative polarity inside)
• Power supply via 9 V DC power supply (not included, suitable power supply: Art.409939)
• Current consumption: 15 mA
• True bypass
• Dimensions (W x D x H): 65 x 125 x 53 mm
• Weight: 587 g

Note: Battery operation is not supported.

• Extreme distortion for tougher metal styles
• Controllers: Gain - Volume
• True bypass
• LED: Effect On
• Foot switch: Effect bypass
• Connections: (6.3 mm jack), output (6.3 mm jack), power supply connection (coaxial socket 5.5 x 2.1 mm - negative pole inside)
• Power supply via 9 V battery or a 9 V DC power supply unit (not included - suitable power supply: Article Nr 409939)
• Dimensions (W x D x H): 74 x 132 x 58 mm

• Distortion
• Controls: Gain, Volume and Filter
• 3-Way mode switch: Fat, Classic and Turbo
• True bypass
• Input: 6.3 mm jack
• Output: 6.3 mm jack
• Mains adapter connection (Barrel connector 5.5 x 2.1 mm, negative polarity inside)
• Power consumption: 40 mA
• Power supply with 9 V DC mains adapter (not included in delivery - suitable mains adapter: Art.409939)