Volume & Expression Pedals

• Operates wear-free via a precision magnetic sensor
• Without a mechanical potentiometer
• Volume from -92 dB (mute) to 0 dB (unity gain), or +12 dB (boost with adjustable potentiometer)
• No damping of higher frequencies
• No sound loss
• Supply voltage is rectified, filtered, stabilized and doubled to 18V
• Total dynamic range of 110 dB by use of a Blackmer VCA
• Low-friction bearings
• Finely adjustable brake
• Buffered direct-out as an output for a tuner or second amp
• Power supply via a 9V - 15V DC or oder 7 - 12 V AC (coaxial power connector - polarity is not relevant, corresponding power suppy available under Article Nr 409939 (not included, must be ordered separately)

• Inputs and outputs are located on the side
• Ideal for pedal steel players
• Equipped with a precision magnetic sensor
• Doesn't include a mechanical potentiometer
• Volume from -92 dB (mute) to 0 dB (unity gain), or +12 dB (boost adjustable with potentiometer)
• No damping of higher frequencies
• No sound loss
• With the help of the MIN knob, the minimum volume can be set from 0-90%
• Supply voltage is rectified, filtered, stabilised and doubled to 18V
• Total dynamic range of 110 dB with a Blackmer VCA
• Low-friction bearings
• Brake can be finely adjusted
• Buffered direct-out as an output for a tuner or a second amp
• Power supply via a 9V - 15V DC or oder 7 - 12 V AC (coaxial power connector - polarity is not relevant, corresponding power suppy available under Article Nr 409939 (not included, must be ordered separately)

Nektar NX-P; universal expression pedal; works in conjunction with all standard keyboards; switchable polarity; range control; weight: 0.5 kg

• Expressionpedal suitable for MS series / X series / SD series and XD series new model
• #9PE010

• Ideal extension for Line 6 amps and effects
• The EP1-L6 is the only Mission expression pedal that is compatible with Line 6 amps and effects
• Robust metal housing
• Dimensions (L x W x H): 251 x 99 x 76 mm
• Weight: 1.88 kg
• Colour: Black

• Gear drive
• Compatible with a variety of effects pedals
• 3-Way selector switch for configuring TRS assignment and load resistance
• Passive mode of operation
• Non-slip rubber pads
• 6.3 mm TRS jack output
• Metal housing
• No power supply required
• Dimensions (L x W x H): 127 x 76 x 61 mm
• Weight: 500 g

The H version is designed with high impedance and is therefore designed for use between guitar and amp. Thanks to the Minimum knob you've practically got a rhythm preset available.

With its high-impedance design, the pedal is interesting for guitarists who want to control the volume of their guitar (and thus also the distortion of the amp) by pedal. The FV 500 fulfils this task - in contrast to most guitar potentiometers - practically without sound loss - particularly before the preamp of the amp! The tuner out is also very practical; With a connected tuner you can tune silently!

The new pedalboard star?

• Aluminium casing
• High impedance
• Input and output jack on the front
• Expressional pedal connection
• Pedal can be used as a volume and as an expression pedal
• Controller for Minimum volume
• Suitable for guitar and bass guitar
• Measurements (W x H x D): 110 x 72 x 289 mm
• Attention: Not suitable for keyboards!

• Cable length 2 m with 6.3 mm stereo jack plug

• Connect an expression pedal with up to three expression-capable effects and control them individually or at the same time
• Each channel is individually programmable so you can set independent start-, stop positions and tapers for each effect
• No need to have multiple expression pedals for different effects
• Three foot-switchable expression outputs
• Five programmable taper options
• Three colour LED channel selection display
• LED pedal position indicator
• Internal memory for presets
• Power consumption: 100 mA
• Powered via 9V DC power supply (coaxial connection - minus terminal inside, not included, corresponding power supply available under Article Nr 409939)
• Dimensions (W x D x H): 112 x 64 x 28 mm
• Weight: 204 g
• Made in the USA

• Designed for use with devices that favour a 25K potentiometer, such as Eventide, tc electronic, Strymon and Moog
• Has two 6.3 mm jack output jacks that can be used to control two expression pedal devices simultaneously
• Robust metal construction
• Dimensions (L x W x H): 251 x 99 x 76 mm
• Weight: 1.43 kg
• Colour: Black

• Expression pedal
• The control range can be fine tuned and inverted
• Polarity switch for maximum compatibility with a wide range of devices
• Advanced, lightweight yet rugged polymer construction
• Includes 1.8 m stereo cable
• Control: Range
• Push Buttons: Polarity - Reverse
• Dimensions: (W x D x H) 87 x 252 x 76 mm

• Compact format with 50% less weight and 35% less size compared to the Lehle Mono Volume Pedal
• Wear-free due to precision magnetic sensor
• Without mechanical potentiometer
• 120 dB dynamic range thanks to 30 V technology
• No treble attenuation
• Up to +12 dB boost
• No sound loss
• Supply voltage is rectified, filtered, stabilised and doubled to 30 volts
• MIDI via USB
• Additional buffered direct output for a tuner, recording or a second amplifier without sound loss
• Low-friction slide bearing
• Power supply with a 9-15V mains adapter (5.5 x 2.1 mm hollow female plug socket - any polarity)
• Suitable power supply: art. 409939 (power supply not included)

• Specially designed to use with the Neural DSP quad Cortex
• Linear potentiometer matched to the exact specifications of the quad Cortex for precise and natural control
• Integrated toe switch to turn effects on and off without the need for a separate footswitch
• Colour: Grey Metallic
• Dimensions (L x W x H): 251 x 99 x 76 mm
• Weight: 1.43 kg

• Hammond SK1, SK2, XK1 & XM2

• Compact, passive 2-in-1 volume/expression pedal
• Not only for controlling multi-effects of the Ampero series, but also for controlling other devices or for use as a passive volume pedal
• LED: Effect On
• Footswitch: Effect Bypass
• Input: 6.3 mm jack
• Output: 6.3 mm jack
• EXP output: 6.3 mm stereo jack
• Dimensions (W x D x H): 81 x 162 x 51 mm
• Weight: 430 g

• Switchable polarity
• 2 Outputs
• Power supply via 12 V mains adapter or 9 V batteries (both not included - suitable mains adapter: Art.188460)
• Dimensions: 113 x 117 x 248 mm
• Weight: 1.15 kg

• With integrated switch specifically for using with the Kemper Profiler
• Linear potentiometer for a precise and natural adjustment that is calibrated to match exactly the specifications of the Kemper Profiler
• Integrated toe switch effects on and off without requiring a separate foot switch
• Works with all Kemper Profiler models
• Dimensions (L x W x H): 251 x 99 x 76 mm
• Weight: 1.43 kg
• Colour: Green

• Connector: 8-pin DIN plug for Leslie XE-1 and XK-3

• Adjustable pedal resistance
• Adjustable effect parameters for heel and toe position
• Switchable reversal of the parameters from heel to toe position and vice versa
• Pedalboard-friendly dimensions
• 6.3mm Jack input and output
• Tuner output
• 6.3 mm Stereo jack output for Expression function
• Lightweight and sturdy aluminium housing
• Slip resistant rubber tread
• Passive operation