Expander Modules

• Expands Droid Master (Art. 542913, not included) by 2 large and 8 small freely assignable knobs
• Possible applications: Control of LFO frequency or envelope parameters, pitch of a sequence or single steps, mixing of CV signals and much more.
• Current consumption: 10mA (+12V) / 0mA (-12V)
• Width: 5 TE
• Depth: 25 mm
• Incl. 6-pin ribbon cable for connection to Droid Master

• For OXI One sequencer (art. 545274)
• 8 CV and 8 gate outputs (3.5 mm jack)
• Clock in/out (3.5 mm TRS jack)
• Connection to OXI One via micro HDMI to HDMI cable (included)
• Passive construction (no power supply required)
• Width: 6 U
• Depth: 10 mm

• Expander for the Quadrax module (available under Article Nr 477993 (not included))
• Adds an EOR (End Of Rise) and an EOF (End Of Fall) trigger/gate output to each of the Quadrax’s four channels
• Power requirement: 8 mA (+12V) / 0mA (-12V)
• Width: 4 HP
• Depth: 22 mm

Der Mann mit der Maschine P2B8 Controller Green; Eurorack module; expands Droid Master (item 542913) with 2 freely assignable control knobs and 8 illuminated push buttons (green); example of applications: controlling LFO frequency or envelope parameters, changing pitch of a sequence or signle steps, managing presets, manual triggers, selecting quantizer scales and many more; power consumption: 12mA (+12V) / 0mA (-12V); width: 5 HP; depth: 25mm; connects to Droid Master via 6-pin ribbon cable (included)

Der Mann mit der Maschine B32 Controller; Eurorack module; expands Droid Master (item 542913) with 32 freely programmable and illuminated push buttons; example of applications: managing presets, step sequencer, manual triggers, selecting quantizer scales and many more; power consumption: 24mA (+12V) / 0mA (-12V); width: 10 HP; depth: 33mm; connects to Droid Master via 6-pin ribbon cable (included)

• Extension module for the A-160 (Article Nr 186683)
• 8 Outputs are switched to the rhythm of the clock divider (A-160)
• Eurorack format
• Width: 4 HP
• Depth: 40 mm
• Power requirement: +20 mA (+ 12V) / -0 mA (-12V)

Note: Module must be installed directly to the right of the A-160 clock divider!

• Expander for the Metropolix (available under Article Nr 514054 (not included))
• Extends the Metropolix sequencer with an extra 8 configurable gate/trigger outputs
• Power requirement: 8 mA (+12 V) / 0 mA (-12 V)
• Width: 4 HP
• Depth: 22 mm

• Adapter to make rear USB ports of modules permanently accessible (e.g. for updates)
• Micro-USB port
• Passive design (does not require power supply)
• Including 3U front panel with 2 passive multiples, 1U front panel, Micro-USB to Micro-USB cable (60cm)
• Width: 2 HP
• Depth (incl. attached cable): 40 mm

• Expansion module for FH-2 (Article Nr. 443431)
• Extends the FH-2 module by 8 freely assignable CV outputs
• Up to 7 FHX-8CV can be connected to one FH-2 for up to 64 CV outputs
• Width: 4 TE

• Extension to the ADDAC 501 Complex Random (available under Article Nr 505630 (not included))
• Derives a positive and inverted gate signal from channels 1-3
• Smooth knob defines the amount of legato between each clock step
• Powered via ADDAC 501 module
• Width: 4 HP
• Depth: 50 mm

• Extension for Expert Sleepers ES-3 or ES-8 USB
• Connects to one of the stereo channels on the ES-3 or ES-8 to provide 8 Gate / Clock / Sync / MIDI outputs and connections for up to 6 additional modules
• Analogue outputs: 8x 3.5 mm Mini jack
• Power requirement: 8 mA at +12 V, 0 mA at -12 V
• Dimensions (W x D): 4 HP / HP x 49 mm

• Expander for the Tetrapad by Intellijel (available under Article Nr 440071 (not included))
• Combo mode: Allows you to use the 4 Tetrapad pads as a fader, bipolar fader, crossfader, LFO, switch, or drum pad
• Notes mode: Each pad can be divided into 4, 8, 12 or 16 note values (incl. a selection of different scales and chords)
• Voltage mode: Each pad can be divided into 8, 12 or 16 zones to create control voltages
• Step recording with up to 256 steps
• Real-time performance recorder and looper
• Additional Loopy Performance mode for loopers and sequencers
• Transport functions for controlling other modules
• 3 Assignable CV inputs with bipolar attenuators
• 3 Configurable CV outputs
• Sync all your motions with the internal- or external clock (with adjustable multiplication/divison)
• 99 User presets per mode
• Memory storage via the microSD card (included, 16 GB)
• Power requirement: 120 mA (+12 V) / 6 mA (-12 V)
• Width: 8 HP
• Depth: 39 mm

• TRS MIDI adapter for Disting MK4, Super Disting EX Plus Alpha, ES-9, General CV and FH-2
• 6 TRS jack sockets (3.5 mm)
• MIDI assignment type A or type B possible
• Passive construction
• Width: 2 TE
• Depth: 30 mm

• Expands the Droid Master (Art.542913) by 4 motorised faders (60 mm), each with status LED and button
• Possible applications: output of control voltages, step sequencer, mixer for audio and CV signals, ADSR envelopes and much more
• Several fader levels with different functions can be defined
• Haptic feedback programmable with discrete steps or variable resistance (applications: Pitch-bender, selection of notes of a scale, transposition of a sequence, direct selection of waveforms or presets, etc.)
• Current consumption: 350mA (+12V) / 0mA (-12V)
• Width: 14 HP
• Depth: 42 mm

Der Mann mit der Maschine P4B2 Controller; Eurorack module; expands Droid Master (item 542913) with 4 freely assignable control knobs and 2 illuminated push buttons; example of applications: controlling LFO frequency or envelope parameters, changing pitch of a sequence or signle steps, managing presets, manual triggers, selecting quantizer scales and many more; power consumption: 11mA (+12V) / 0mA (-12V); width: 5 HP; depth: 25mm; connects to Droid Master via 6-pin ribbon cable (included)

• Expander for Moskwa II sequencer (Art.521036)
• Expands Moskwa II with CV inputs for Random Play, Slew, Probability, Transpose, Range, Clock Rate, First Step, Last Step
• Output of the internal clock signal
• Separate gate output for each of the 8 steps
• Connection to the XAOC Leibniz Binary Subsystem possible
• Power supply via Moskwa II module
• Width: 8 HP
• Depth: 30 mm

• Expands Black Low-Pass Filter and Black High-Pass Filter by a separate bandpass/notch filter
• Controls for filter frequency and bandwidth
• Mode switch (bandpass / notch filter)
• CV inputs for filter frequency and bandwidth
• Current consumption: 25 mA (+12 V) / 21 mA (-12 V)
• Width: 8 HP
• Depth: 35 mm

Note: For operation, the Black Low-Pass Filter (Art.518165) and the Black High-Pass Filter (Art.518166) are required (not included in delivery).

Der Mann mit der Maschine P2B8 Controller; Eurorack module; expands Droid Master (item 542913) with 2 freely assignable control knobs and 8 illuminated push buttons (white); example of applications: controlling LFO frequency or envelope parameters, changing pitch of a sequence or signle steps, managing presets, manual triggers, selecting quantizer scales and many more; power consumption: 12mA (+12V) / 0mA (-12V); width: 5 HP; depth: 25mm; connects to Droid Master via 6-pin ribbon cable (included)

• Expansion module for the A-149-1 (Article Nr: 199098)
• Supplies 8 digital, random voltages
• Eurorack format
• Width: 4 HP
• Depth: 35 mm
• Power requirement: +40 mA (+ 12V) / -10 mA (-12V)

Note: Must be mounted directly to the left or right of the A-149-1, as an internal connection must be established between both modules. Can not be operated without the A-149-1!