Mixer Attenuator Modules

• 3-Channel mixer, attenuator, attenuvertor, inverter, multiplier, adder and DC voltage source
• When the input jack is empty, each channel provides 0 V to +5 V or -5 V to +5 V as the voltage source
• Channels A and B can generate 0 V to +10 V or -10 V to +10 V
• Switch for voltage doubling on channel A
• Switch for +5 V offset on channel B
• Mute switch for channel C
• Mix-Out
• Power requirements: 49 mA (+12 V) / 25 mA (-12 V)
• Width: 6 HP
• Depth: 21 mm

• Inverting/interrupting mixer
• 4-Channel mixer with level control 3-way switch per channel (inverted, mute, non-inverted)
• Channel 1 can generate an offset voltage of +/-5V
• Individual outputs for all channels for use as a 4-channel attenuator
• Two parallel mix outputs
• Power consumption: 20mA (+12V) / 20mA (-12V)
• Width: 6 U
• Depth: 40 mm

• Inputs: 4 x signal in, 4 x CV In
• Outputs: Signal Out, 4 x Single Out
• Width: 18 HP
• Depth: 50 mm
• Current consumption: +60mA (+12V) / -50mA (-12V)

• For mixing audio, CV and gate signals
• Module consists of three parts: Mixer A: a low-noise 4-channel mixer
• With independent gain control for each channel
• Mixer B: a low-noise 4-channel mixer with master gain control
• MixBus: A multi-channel mixer that mixes signals from modules with the Tiptop MixBus
• Width: 10 HP
• Depth: 36 mm
• Power requirement: +14 mA (+12 V) / -12 mA (-12 V)

• Discrete analogue stereo mixer for audio signals
• Three stereo channels, each with gain and panorama controls
• One mono channel with gain control
• Produces sound colourations from slight compression to overdrive at higher levels
• Feedback control for subtle overdrive up to drastic gate effects
• Master volume control with signal LEDs and switchable soft clipping
• Stereo master output
• Current consumption: 80mA (+12V) / 80mA (-12V)
• Width: 8 TE
• Depth: 40 mm

• Mixer for audio and CV signals
• 2 Independent sections (A & B)
• 2 Signals per section can be mixed, inverted, and rectified
• Bipolar level control per input (X & Y)
• Bipolar amplitude and offset control per section output
• Per section 2 input (X & Y), master output and inverted output
• Averaged mix output from A & B

• Managing and summing a group of up to eight connected Mono or Stereo channels
• Controls for two stereo effect returns and a group volume
• Mute and PFL buttons
• Solo-In-Place switch
• Stereo Group Output
• 2 x Mono effect send
• 2 x Stereo effect return
• CV Inputs for effect return level
• Power consumption: 60 mA (+12 V) / 60 mA (-12 V)
• Width: 6 TE
• Depth: 38mm

• CV-controlled 5-channel stereo mixer
• 2 Channels with 2 inputs each
• CV inputs for crossfade and panorama per channel
• AUX input with stereo VCA
• Stereo-output
• Power Requirements: +145 mA (+12 V) / -110 mA (-12 V)
• Width: 10 HP
• Depth: 30 mm

• Discrete analogue mixer for audio signals
• At higher levels, produces sound timbre from slight compression to overdrive
• Maximum level adjustable per channel via gain trimmer
• Feedback control for subtle overdrive up to drastic gate effects
• Master volume control with signal LED
• Normal and inverted master output
• Current draw: 60 mA (+12 V) / 60 mA (-12 V)
• Width: 8 HP
• Depth: 30 mm

• 2 Portamento sections
• Each section with signal input / output and adjustable portamento time (10 ms - 3 s) and CV input
• Two mixer sections, each with 4 channels, normal and inverted output and mixable fixed voltages (-10 V to +10 V)
• Power requirement: 70 mA (+12 V) / 60 mA (-12 V)
• Width: 16 HP

XAOC Devices Sopot; Eurorack module; Triple Signal Summator; three sections (Mix L, Mix M, Mix R) that each sum four inputs to one output; soft clipping circuit per section; middle section (Mix M) can be fed to the other two sections (Mix L, Mix R) by 0%, 50% or 100%; switchable -12dB pad for high signal levels; power consumption: 30mA (+12V) / 20mA (-12V); width: 6 HP; depth: 30mm

• CV / Audio manipulator
• 4 Bipolar attenuators
• 4-in-3 Mixer with 3 identical outputs
• Voltage-controlled LFO: 30 seconds - 440 Hz
• Pulserizer effect distorts the signal to a square wave
• Current draw: 40 mA (+12 V) / 27 mA (-12 V)
• Width: 10 HP
• Depth: 23 mm

• Width: 4 HP / 20.0 mm
• Depth: 20 mm
• Power requirement: 20 mA

• A two-channel mixer
• 5 Inputs per channel with passive summing, active amplifier stage with gain control and signal output
• Suitable for control voltage and audio signals
• Current consumption: 5 mA (+12 V) / 5 mA (-12 V)
• Width: 4 TE
• Depth: 25 mm

• Compact stereo mixer
• 4 Channels with volume control and stereo / mono input
• Stereo AUX in
• Stereo output with peak LEDs
• Power requirements: +26 mA (+12 V) / -26 mA (-12 V)
• Width: 6 HP
• Depth: 30 mm

• Compact 3-channel mixer
• Suitable for CV and audio signals
• Volume control per channel
• 1x Input and 1x mix output
• Power requirements: +4 mA (+12 V) / -4 mA (-12 V)
• Width: 3 HP
• Depth: 35 mm

• Ttwo-channel bipolar attenuator for audio and CV signals
• Offset control with +/- 10 V control range
• Two-colour LED indicates signal polarity
• Can be used as DC source without input signal
• Current consumption: 21 mA (+12 V) / 18 mA (-12 V)
• Width: 5 HP
• Depth: 24 mm

• 4 Inputs with volume control
• Master gain control
• 4 Parallel master outputs (2x inverted)
• 2 Integrated passive 4-jack multiples
• Width: 14 HP

• 4-in-2 mix module in Eurorack format
• Four inputs with attenuator and pan control, plus two 3.5 mm mini jack outputs
• Width: 8 HP
• Depth: 30 mm
• Power requirements: +10 mA (+12 V) / -10 mA (-12 V)