Various Modules

• Combination of four S & H stages, sequential gate and sequencer controller
• Voice allocate mode: From monophonic melodies pseudo-polyphonic sequences can be generated
• Shift Register Mode: To create chords - each newly received gate input causes the current CV value to shift one channel further
• Manual reset button and socket
• Gate input can be switched between sample-and-hold or track-and-hold
• Width: 6 TE / HP
• Depth: 40 mm
• Electricity requirement: +49 mA (+12 V) / -4 mA (-12 V)

• 4 Channel oscillator calibrator
• Measures and calibrates the pitch CV characteristic curve for up to 4 oscillators and corrects for octave tracking
• Octave and semitone selection over 10 octaves
• Portamento and Glissando adjustable per channel (0-10 seconds)
• Integrated chromatic quantizer
• 4 memory locations for transposition
• Glissando and Portamento user preset settings
• Power requirements: 44 mA (+12 V) / 8 mA (-12 V)
• Width: 6 HP
• Depth: 36 mm

ADDAC 809 Chain Router; Eurorack module; CV controllable signal router; two signal-loops (A&B), each with input and output; 6 different routings selectable via buttons, gate inputs and Scroll CV input: Bypass, Loop A, Loop B, Loop A into Loop B, Loop B into Loop A, Loop A/B parallel; power consumption: 80mA (+12V) / 30mA (-12V); width: 6 HP; depth: 55mm

• Precision Adder and Averager
• Works as a dual 3-on-1 or 5-on-2 distributor
• Each section can be jumpered as an adder or averager
• Averager mode avoids clipping when summing high-level signals
• Power requirement: 20 mA (+12 V / 20 mA (-12 V)
• Width: 2 HP
• Depth: 40 mm

• Utility waveform processor for CV and audio signals
• Functions: Mixing, Inverting, Offset Generation, Minimum / Maximum Analysis, Signal Limitation, Signal Scanning, Sample & Hold
• 4 Channels with 2 inputs each
• Exit and attenuator
• 5V offset switchable for channels 1 & 2
• Power requirement: 50 mA (+12 V) / 20 mA (-12 V)
• Width: 10 U
• Depth: 20 mm

• Two 16-pin slots for flying bus boards or bus boards
• Connectors for CV/gate bus
• Two power supply connectors for connecting further Row Power modules or 4ms Pod Eurorack enclosures
• Connection: 5.5 mm hollow female plug, 2.1 mm inside
• Polarity: Plus inside
• Power: 2.0 A (+12 V) / 1.4 A (-12 V) / 1.5 A (+5 V)
• Mains switch and control LEDs for +12 V, -12 V and +5 V
• Width: 4 U
• Depth: 27 mm

Note: Requires 4ms Power Brick 90 W (art. 544851 - not included)

• Compact quantiser module
• Storage locations for 8 scales
• Web editor available for creating your own scales
• Adjustable quantisation tolerance in the range of 10% - 50%
• Adjustable glide time
• Connections: Clock In, Clock Out, CV In and CV Out
• Power requirement: 25 mA (+12 V) / 6 mA (-12 V)
• Width: 3 HP
• Depth: 35mm

• Octave switching and precision transposition
• Pitch control for up to 4 oscillators
• 3 CV inputs are added and allocated over 4 outputs and 1 inverted output
• Transposition of rotary switch from +/- 4 octaves and transposition of fine tuning knob from +/- 7 semi-tones possible
• Power requirement: 7 mA (+12 V) / 3 mA (-12 V)
• Width: 6 HP
• Depth: 20 mm

Doepfer A-149-4; Eurorack module; Quad Random Voltage Source; provides four triggered and quantized random voltages (range: 0V to +5V); adjustable octave range; selectable quantization grid: Octaves, Octaves + Quin, Chords, Scale, Semitones, continuous; minor or major key selectable; separate buttons for adding a Sixth or Seventh; 4 trigger inputs and 4 CV outputs; power consumption: 50mA (+12V) / 10mA (-12V); width: 4 HP; depth: 50mm

• Dual VC Polariser
• channel polariser
• VCA
• Inverter
• Ring modulator
• Per channel: manual control (gain range -1 to +1), CV attenuator, CV input, CV modulation input, signal input and output
• Power requirement: 20 mA (+12 V) / 20 mA (-12 V)
• Width: 4 HP
• Depth: 40mm

• Consists of a multi-channel noise source and two random sections
• Four output noise generator: blue, white, pink and red or brown noise
• The random voltage and clock section features four uncorrelated random CV generation paths, divided in; fluctuating random voltage; quantized random voltage with 2n stages tuned in semitones referred to 1V/oct scale; quantized random voltage with n+1 stages tuned in octaves referred to 1V/oct scale; non quantized sample & hold.
• Additional Random Clock sources per random section, where normal and random clock signals can be triggered individually
• Width: 18 HP
• Depth: 38 mm
• Power requirement: +250 mA (+12 V) / -170 mA (-12 V)

• Compact power supply for small Eurorack systems
• Performance indication: 1 A @ + 12 V / 700 mA @ -12 V
• Flying Bus Board with slots for 5 modules (40 cm)
• Power supply via external power supply: 12 V - 20 V DC (not included)
• Integrated passive 2x 3 multiple
• Width: 2 U
• Depth: 42 mm

• Adjustable slew-up time
• Incremental curve switchable (linear / exponential)
• Eurorack format
• Power requirements: +30 mA (+ 12V) / -30 mA (-12V)
• Width: 8 HP / 40.3 mm
• Depth: 60 mm (measured from the back of the front panel)

• Random-voltage generator
• Allows all random signals to be synchronised with a clock
• Two VCOs, Phase Lock Loop, Lag Processor, Clock, Burst Generator and Sample & Hold
• Generates seven random signals simultaneously: Smooth VCO, Woggle VCO, Ring Mod, Stepped, Smooth, Woggle, Burst
• Generates extremely stable master clock
• Inputs for Sample & Hold (Heart IN) and Ring-Mod (Influence)
• Current consumption: 50mA @ + 12V, 40mA @ -12V
• Dimensions (W x D): 10 HP x 24 mm

• Control LEDs for +12 V, -12 V and +5 V.
• Slots for 2 Flying Bus Boards with 7 slots each
• Output: 1 A (+12 V) / 1 A (-12 V) / 0.5 A (+5 V)
• Width: 4 HP
• Depth: 52mm
• Includes external power supply unit (13 V DC, 3 A), 2 Flying Bus Boards with 7 slots each

• Multipurpose module for creative work on CV- and Audio signals
• 2 Sections with 2 respective inputs
• Voltage-controlled crossfader between Sections 1+2 and A+B
• Each section can mix, invert, scale, and offset
• Power requirements: 55 mA (+12 V) / 55 mA (-12 V)
• Width: 10 HP
• Depth: 42 mm

• Width: 8 HP
• Depth: 40 mm
• Power requirement: +40 mA (+ 12V) / -0 mA (-12V)

• 4-Channel multi-function module
• Each channel can be used as manual attenuator or as an inverter
• Without signal an adjustable voltage is present at the output (-5V to + 5V)
• VCA functionality when using the CV input, whereby a positive voltage opens the attentuator into a positive direction, and an inversion causes negative voltages
• Linear control characteristics of the CV inputs
• Ring modulator functionality when using an audio signal at the CV input
• Generate a voltage-controlled mixer with a maximum of four channels by interconnecting jumpers on the PCB (normalisation of the outputs of adjacent channels to the input of the one below)
• Power consumption: -12V 35 mA, +12V 45 mA
• Dimensions (W x D): 10 HP x 30 mm

• Authentic reproduction of the circuits from the series "Modular 55 & 35"
• Controls up to 12 parallel 921B oscillator modules
• 2 Summed CV inputs for frequency control and 2 summed CV inputs for pulse width modulation
• Switchable semitone / octave selector and manual pulse width control
• Power requirement: 15 mA +12 V, 15 mA -12 V
• Width: 8 HP