Allround Microphones

• Directional characteristic: Hyper cardioid
• 25 / 18,000 Hz
• 280 Ω
• 2-Stage treble resonator for optimizing the high-frequency reproduction
• Special sound geometry with high-tech acoustic fabric behind the diaphragm
• Special sound holes for a frequency independent directional characteristics
• Weight 345 g
• Successor to the TG-X 60/61
• Incl. microphone clip

• Unusual retro design
• Suitable for vocals, but also for miking guitar amps and instruments
• Directivity: Supercardioid
• Frequency range: 50 - 15,000 Hz
• Sensitivity: 3.1 mV / Pa (-50 dB)
• Impedance: 600 Ohm
• Black/Silver housing
• Plastic case included
• Dimensions: 162 x 113 x 62 mm
• Weight: 369 g

• Suitable for brass, drums and amplifiers
• Polar pattern: Cardioid
• Frequency range: 70 - 20,000 Hz
• Sensitivity: 144/156 dB SPL
• Impedance: 200 Ohm
• Dimensions: 44 x 79 mm
• Weight: 245 g
• Colour: Dark stage blue
• Mount included

• Polar pattern: Cardioid
• Handmade capsule
• Noise: 9 dB (A)
• Boundary sound pressure level: up to 160 dB (THD 0.5%)
• LoCut filter: 80 Hz, 160 Hz
• Pad: 0 dB, -10 dB, -20 dB
• Gold-plated XLR contacts
• Requires 48 V phantom power
• Dimensions (diameter x height): 58 x 168 mm
• Weight: 440 g

• FET circuitry
• Directional characteristic: Cardioid
• Frequency response: 35 - 20,000 Hz (+/- 3.5 dB)
• SPL (sound pressure level): 136 dB (
• Equivalent noise level:
• Switchable pad: -10 dB
• Switchable high-pass filter switch: 80 Hz (6 dB/oct.)
• Requires phantom power: 48 V
• Dimensions (L x W): 46 x 155 mm
• Weight: 0.4 kg
• Includes a microphone shock mount and a bag

Bundle offer comprising

• Condenser microphone
• Cardioid
• Gold coated 17 mm capsule
• Stable metal construction
• Dynamic range: 121 dB-A
• Capsule size: 17 mm
• Sensitivity: 16.7 mV / Pa (-35.5dBV)
• Nodule (IEC 61672-1)
• Impedance:
• Dimensions: 138 x 52 x 36 mm
• Weight: 310 g
• Colour: Black
• Includes bag, shock mount and windscreen

• Microphone stand with boom arm
• Length: ca. 92 to 150 cm
• Boom arm length : 70 cm
• Thread: 3/8" and with a 5/8" adapter
• Weight: 2.2 kg
• Colour: Black

• Pop-killer for clamp-on
• Diameter of the screen: 150 mm
• Length of gooseneck: 350 mm
• Screw clamp fits all common microphone stands
• Clamping range: Approximately 18 - 25 mm
• Colour: Black

• Specially for picking up drums, brass, guitars and bass amplifiers
• Tiltable and fixable microphone head
• Polar pattern: Supercardioid
• Frequency range: 70 - 18,000 Hz
• Max. SPL: 140dB
• 2.4 mV / Pascal
• Impedance: 350 Ohm
• Black zinc diecast housing
• ABS polycarbonate
• Dimensions: 144.1 x 72.5 x 56 mm
• Weight: 309 g
• Incl. SAND-1 microphone holder and bag

Bundle offer comprising

• Condenser large diaphragm microphone
• Polar pattern: Cardioid
• Switchable -10dB PAD
• Frequency response: 20 - 20,000 Hz
• Max. SPL: 140/150 dB (THD = 0.5%)
• Electrical impedance: 200 Ohm
• Requires phantom power
• Diameter: 53 mm
• Length: 162 mm
• Net weight: 320 g
• Colour: Black
• Incl. shock mount

• Professional microphone cable
• Length: 10 m
• Black Yongsheng XLR plug (made by Neutrik)
• XLR male --> XLR female
• Incl. hook and loop fastener

• With a dynamic large-diaphragm capsule
• A/D-D/A Conversion is done in the microphone
• Adjustable headphone amplifier with 3.5 mm jack socket integrated
• Directional characteristics: Cardioid
• Maximum sound pressure: 115dB
• Frequency range: 40 Hz to 14 kHz
• Including: Mount for microphone stand, USB cable 3 m
• Optional accessories: Spider connector and swivel arm for table mounting (not included)

Bundle offer comprising

• Dynamic microphone

The MD 421 is one of the most famous microphones in the world. Due to its sonic qualities, it can be used in various recording situations and in all areas of sound transmission technology. The 5-stage bass switch underlines the all-round qualities.

• Suitable for voice, guitar, wind instruments and drums
• Very tough
• Polar pattern: Cardioid
• 5-Stage switch Bass
• Good feedback rejection
• Transparent sound reproduction
• Frequency response: 30-17000 Hz
• Free field, no circuit sensitivity (1kHz): 2 mV / Pa (- 3 dB)
• Nominal impedance: 200 Ohm
• Min load impedance:. 200 Ohm
• Dimensions: 215 x 46 x 49 mm
• Weight: approx 385 g
• Incl. microphone clamp for 3/8" thread

• Microphone Preamplifier
• Extremely low-noise Class A JFet amplifier
• For dynamic and ribbon microphones
• 2 Matched JFet transistor pairs
• Input: Balanced 3-pin XLR female
• Output: Balanced 3-pol. XLR male
• Input impedance: 20 kOhm
• Gain: 28 dB (@ 3 kOhm source impedance)
• Frequency response: 10 - 50,000 Hz (+/- 1 dB)
• Requires phantom power: 24 - 48 V.
• Dimensions (L x W): 77 x 22 mm
• Weight: 35 g
• Developed and produced in Germany

Note: Does not allow phantom power to pass through to the microphone

• For musicians, dancers and athletes who require a larger range of motion
• Directional characteristic: Supercardioid
• Suppresses background noises
• Flexible microphone boom arm
• Microphone capsule is protected from moisture via plastic injection moulding
• Lightweight and hardly visible
• For Sennheiser EW systems
• Colour: Black-Black

• Omnidirectional characteristic
• Sensitivity: 1.33 mV/Pa, -57.58 dBV/Pa
• Internal resistance: 235 Ohm
• Nominal load impedance: 1000 Ohm
• Gold-plated 3-pin XLR connector
• Weight: 0.25 kg
• Incl. carrying bag, microphone flag and connection cable to camera

• Polar pattern: Supercardioid
• Frequency range: 50 to 18,000 Hz
• Impedance: 300 Ohm
• Sensitivity: 74 dB
• XLR connector
• Microphone holder with 3-dimensional adjustment mechanism
• Weight: 485 g
• Incl. pop filter and 9 coloured accent rings

• Polar pattern: Supercardioid
• Frequency range: 50 - 18,000 Hz
• Impedance: 325 Ohm
• Max. SPL: >135 dB
• Dimensions (L x Ø): 184 x 48 mm
• Weight: 387 g
• Incldues microphone clip mount and bag

• Optimised for Slate Digital VRS8 audio interface and Slate Preamp
• Similar to the Slate Digital ML-1 in linear and flat frequency response
• Allows microphone placements that are difficult or impossible for a larger microphone
• Side-mounted switch attenuates input signal and re-polarises the capsule to emulate both dynamic and condenser microphones
• Includes licence for VMC Classic Instruments software

Note: Requires copy protection iLok Cloud service or iLok 2 / iLok 3 (401447, not included)

• Dynamic
• Cardioid
• 50 - 16,000 Hz
• 250 Ω
• Peaj 138 dB SPL
• Stable steel basket
• Enormously feedback resistant
• Very low handling noise
• Incl. Clip

• Suitable for drums, electric guitar amps and brass instruments
• Polar pattern: Cardioid
• Frequency response close miking: 33 - 19,000 Hz
• Frequency response distant miking: 80 - 19,000 Hz
• Nominal impedance: 600 Ohm
• Open circuit voltage: 2.7 mV/Pa (-51.4 dBV) ±3.0 dB
• Dimensions (L x W): 79.5 x 44 mm
• Weight: 203 g
• Includes microphone clamp and bag

• Suitable for vocals, guitar amps, drums, percussion, etc.
• Directional characteristic: supercardioid
• Frequency range: 50 - 15,000 Hz
• Sensitivity: 3.1 mV / PA (-50 dB)
• Impedance: 600 ohm
• Black housing
• Included in delivery: microphone holder, threaded adapter, protective bag with zipper
• Dimensions (Ø x L): 47 x 190 mm
• Weight: 792 g

Bundle offer comprising

• Dynamic bass drum microphone
• Specially for bass drums, tubas, and other bass instruments
• Polar pattern: Cardioid
• Frequency range: 20 - 18,000 Hz
• Impedance: 350 Ohm
• Integrated stand adapter
• Incl. bag
• Dimensions: 128.5 x 60 mm
• Weight: 440 g

• Micro Tripod For Bass Drum
• Special tripod for the positioning of the microphone in front of or in the bass drum
• Extendable
• Dimensions: 20 x 19 x 18 to 24.5 cm
• Colour: Black
• Included: Thread Adapter 3/8 "- 5/8"