Large Diaphragm Microphones

• Pressure gradient condenser
• Directivity: cardioid, omnidirectional and figure-8
• Frequency range: 20 - 20000 Hz
• Capsule: CK12 both sides gold vaporized membrane 1 inch
• Impedance: 200 ohms / 50 ohms switchable
• SPL: 138 dB
• Tube: 6072a General Electric JAN double triode
• Length. 216 mm
• Diameter: 51 mm
• Weight: 567 g
• Incl. power supply, flight case and microphone box made of wood

• Sontronics STC-3X Pack Silver
• With elastic suspension
• With pop protection
• Incl. 5 m XLR cable
• With microphone bag

Specifications STC-3X

• Multi-pattern large diaphragm microphone (omnidirectional, cardioid, figure-8)
• 1" Gold-plated double membrane
• Ideal for voice and vocals, acoustic guitar, piano, drums, percussion
• High transparency
• Open, silky sound
• 3-Stage high-pass filter (linear, 75 Hz - 150 Hz)
• 3-Stage PAD (0dB, -10 dB, -20dB)
• Frequency range: 20 - 20,000 Hz
• Max. SPL 125 dB
• Impedance: 200 ohms
• Dimensions (H x W x D): 194 x 53 x 53 mm
• Weight: 640 g
• Colour: Silver

• Pressure gradient transducer with the same large diaphragm capsule of the legendary U 47 and M 49
• Directional characteristics: cardioid
• Frequency range: 20 - 20,000 kHz
• Max. sound pressure level: 114 dB for K
• Max. 8 dBu output voltage
• Nominal impedance: 50 Ohm
• Nominal load impedance: 1 kOhm
• Dimensions (diameter x length): 57 x 142 mm
• Weight: 460g
• Incl. swivel mount, N 149 A universal power supply with mains cable and aluminium case

• With USB port for direct operation on the computer
• No additional drivers necessary
• Directivity: Cardioid
• Frequency range: 30 - 18,000 Hz
• Sensitivity: 25 mV / Pa
• Maximum sound pressure: 140dB (at 1 kHz = 1% T.H.D)
• 16 Bits / 48 kHz
• Headphone output with direct-monitoring
• Mute button
• Includes PVC case, shock-mount, USB cable, foam wind-screen, pop-killer and table tripod

• Set consisting of STC-2, spider, pop shield, XLR cable (3 m) and storage bag
• Polar pattern: cardioid
• 1" Capsule
• Frequency response: 20 - 20,000 Hz
• Low-cut filter
• Adjustment: -10 dB
• Sensitivity: 12 mV / P a -38 dB ± 2 dB
• Max. SPL: 120 dB
• Impedance: = 200 Ohm
• Requires a 48 V phantom power
• Connection: 3-pole XLR
• Dimensions of the microphone (H x W x D): 194 x 53 x 53mm
• Weight: 1100 g
• Colour: Silver

• With REDD.47 preamp
• Polar pattern: Cardioid and omni
• -10 dB pad switch
• Phase switchable
• Gain switchable (in 3 dB steps from +4 to +33 dB)
• Incl. microphone shock mount, Mogami connection cable and transport case

Bundle offer comprising

• Dynamic broadcast microphone

• Hypercardioid polar pattern to minimise ambient noise
• Switchable low-cut and mid-range boost (6 kHz -10 kHz)
• Output: 3-pin XLR
• Sensitivity: -56 dB +/- 3 dB
• Frequency response: 20 Hz - 20 kHz
• Output impedance: 250 ohms
• Microphone dimensions (L x Ø): 172 x 53 mm
• Weight 700 g
• Colour: Black
• Includes shock mount, pouch, and wind guard

• Microphone Preamplifier
• Extremely low-noise Class A JFet amplifier
• For dynamic and ribbon microphones
• 2 Matched JFet transistor pairs
• Input: Balanced 3-pin XLR female
• Output: Balanced 3-pol. XLR male
• Input impedance: 20 kOhm
• Gain: 28 dB (@ 3 kOhm source impedance)
• Frequency response: 10 - 50,000 Hz (+/- 1 dB)
• Requires phantom power: 24 - 48 V.
• Dimensions (L x W): 77 x 22 mm
• Weight: 35 g
• Developed and produced in Germany

Note: Does not allow phantom power to pass through to the microphone

• Pressure gradient condenser
• Polar pattern: cardioid, omnidirectional and eight
• Capsule: TK47
• Frequency range: 20 - 20,000 Hz
• Sensitivity: 22 mV / Pa
• Impedance: 300 ohms
• Max. sound pressure level: 125 dB
• Tube: 5840W (New Old Stock)
• Telefunken BV8 transformer
• Dimensions: 200 x 46 mm (length x diameter)
• Weight: 0.65 kg
• Includes power supply, 7-pin connection cable and holder, microphone cable, dust cover and transport case

Bundle offer comprising

• Large diaphragm condenser microphone
• Cardioid
• 25.4 mm capsule gold-plated
• Dynamic range: 134 dB-A
• Max SPL 0.5% THD: 140 dB
• Robust zinc die-cast housing
• Gold coater 3-pin. XLR connector
• Dimensions: 138 x 52 x 36 mm
• Weight: 310 g
• Incl. DTP40 Lb leather case, LCT 40 SH microphone spider, LCT 40 PSx magnetic pop filter, LCT40 Ws windscreen

• XLR Microphone Preamp And USB Audio Interface
• Low-noise amplification with up to 75 dB
• Powerful 3.5 mm headphone output for latency-free monitoring
• Phantom power 48 V
• Switchable low-cut filter
• Capacitive button mutes the microphone when touched
• Frequency range: 20 - 20,000 Hz
• Dynamic range: 100 dB (120 dB with Clipguard)
• Resolution: 24 bit
• Sample rate: 48/96 kHz
• Interface: USB-C
• System requirements: Windows 10 (64 bit), macOS 10.15 or newer, USB 3.0 or higher

• Microphone Cable
• Length: 2.5 m
• XLR 3-pin male to XLR 3-pin female
• Conductor area: 2x 0.22 mm²
• PVC sheath
• 95% Covered
• Diameter: 6.0 mm
• Colour: Black

• Polar pattern: Cardioid
• Frequency range: 20 Hz - 20 kHz
• Output impedance: 150 Ohm
• Max. SPL: 154 dB SPL
• Voltage supply: 48 ± 4 V
• Dimensions (L x Ø): 187 x 55.9 mm
• Weight: 490 g
• Colour: Champagne
• Includes stand mount and plastic case

The U 87 is probably the best known and most widely used Neumann studio microphone.

The U 87 is equipped with a large dual-diaphragm capsule with three directional patterns: omnidirectional, cardioid and figure-8. These are selectable with a switch below the headgrille. A 10 dB attenuation switch is located on the rear. It enables the microphone to handle sound pressure levels up to 127 dB without distortion. Furthermore, the low frequency response can be reduced to compensate for proximity effect.

• Directional characteristic: Omnidirectional, cardioid, figure-8
• Frequency range: 20-20000 Hz
• Nominal impedance: 200 Ohm
• Weight: 500 g
• Diameter: 56 mm
• Length: 200 mm
• Note: Tripod mount or elastic suspension is not included (optional accessory, available under Article Nr 125520 and 218556)

• Double diaphragm capsule with gold-coated membranes
• Selectable directional characteristics: omnidirectional, cardioid or figure eight and all intermediate levels
• Bus-powered via USB-C
• Does not require a microphone preamplifier or audio interface
• Latency-free monitoring
• Built-in FPGA for real-time calculation of microphone modeling and studio effects
• 24 Bit / 192kHz A / D converter
• Headphone output (3.5 mm stereo jack) with high-quality D / A converter (S / N: 112 dB)
• Frequency response: 20 - 20000 Hz
• Max. sound pressure level: 116 dB
• Power requirement: 5V / 500mA
• Control via software control panel with studio and broadcast presets
• Dimensions (L x D): 219 x 53 mm
• Weight: 550 g
• Includes table stand, elastic holder, pop filter, case and USB cable

Included microphone emulations:

• Berlin 49T
• Berlin 57
• Berlin 87
• Berlin 67
• Berlin M103
• Vienna 12
• Vienna 414
• Tokyo 800T
• Oxford 4038
• Sacramento 121R

Included studio effects:

• Auraverb
• Reel to Reel
• PowerGate
• PowerEx
• VEQ-1A
• VEQ-HLF
• BAE-1073
• VEQ-55A
• Lang-PEQ2
• VEQ-4K BLACK
• Master De-esser
• BA-6A
• FET-A76
• VCA160
• Liverpool
• Stay-Levin
• ALT-436C
• Gyratec IX
• VPA 76
• BAE-1073MP
• RD-47
• BA-31
• Emulations can be used natively (requires Pace iLok 3 Art. 401447, not included)

Specifications:

• Supported formats: AAX, VST, AU
• System requirements: from Mac OS X 10.11, Windows 10, 8 GB RAM (minimum: 4 GB), USB 2.0 port

• For home and project studios
• Polarn pattern: Supercardioid
• Frequency range: 30 - 18.000 Hz
• Impedance: 200 Ohm
• 135 dB SPL max
• 113 dB Dynamic range
• 12 - 52V Phantom power required
• XLR output
• Dimensions: 54 x 150 mm
• Weight: 400 g
• Silver housing
• Compatible with all major OSX und Windows systems - no drivers needed
• Incl. threaded adapter, stand adapter and soft bag

• Double-large diaphragm capsule: 28.25 mm
• Switchable polar pattern: cardioid, omnidirectional and figure eight
• Gain switch +10 dB
• Attenuation switch-10 dB
• Low-noise FET circuit
• Capacitors with high resolution
• Output transformer hand wound
• Circuit Design: Solid-State Low-Noise FET
• Type: Pressure gradient condenser microphone
• Frequency response: 25 - 20000 Hz
• Dynamic range: 120 dB minimum
• Impedance:
• Max. SPL: 0.5% THD @ 1000Hz: 130 dB
• Noise:
• Sensitivity: 16 mV / Pa OR -36 ± 2 dB 0 dB = 1 V / Pa 1000 Hz
• Requires 48 V phantom power
• Includes shock mount and wooden storage box

• Directional characteristic: Cardioid
• High SPL (sound pressure level) capability
• Includes a shock mount

15 Year manufacturer warranty if product is registered within 30 days after purchasing at audio-technica.com

• Polar pattern: cardioid or omnidirectional
• Max. sound pressure level: 135dB SPL
• Frequency range: 30 - 18,000 Hz
• Hi-pass filter optionally at 100 Hz or 200 Hz
• Impedance: 170 Ohm
• Sensitivity: -46 dBv
• Weight microphone: approx. 0.5 kg
• Incl. a power supply with a connection cable and a case

• With K67 capsule
• Switchable directional characteristics: Omni / Cardioid / Figure-8
• Switchable 10 dB pre-attenuation
• High pass filter
• Frequency response: 20 Hz - 20 kHz
• Requires 48V phantom power
• Pearl-grey surface
• Comes in a wooden case

Optional shock mount 125520 (not included)

• Dynamic
• Polar pattern: Cardioid
• Neodyn membrane
• Switchable high-pass filter - 2 levels
• HF lowering
• Includes clamp and storage box

Bundle offer comprising

• Professional large diaphragm microphone
• 1" Large diaphragm microphone with evaporated-gold dual diaphragm capsule based on the AKG Classic
• Frequency range: 20 - 20000 Hz
• Sensitivity: 20 mV / Pa
• Preattenuation pad: 20 dB
• Required phantom power: 12 - 52V
• Connection: 3-pin XLR connector
• Dimensions: 160 x Ø 55 mm
• Weight: 280 g
• Includes elastic microphone suspension holder, metal case and well-designed windshield
• Suitable microphone mount: Article Nr. 124593 (not included)

• Professional Microphone Stand

One of the most widely used microphone stands, here is the industry standard for microphone tripods. Built in 1967, the design of the 210/2 has remained almost unchanged and has to date been sold more than 2 million times.

Very sturdy mechanical parts, such as the diecast base, guarantees a long life even under harsh conditions on the road. The adjustable boom arm and generous height-adjustment makes it also very suitable for musicians who also need to sing.

• Colour: Black
• The industry standard
• With adjustable boom arm
• Diecast base
• Folding tripod legs
• Wide feet construction
• Adjustable height: from 900 to 1600 mm
• Boom arm length: 840 mm
• Weight: 3.18 kg

• Mounting Popkiller
• With elastic arm
• Arm length: 20 cm
• Edge-Ring: Ø 15.5 cm
• Nylon-Cover: Ø 14 cm

• Professional microphone cable
• Length: 10 m
• Black Yongsheng XLR plug (made by Neutrik)
• XLR male --> XLR female
• Incl. hook and loop fastener

• Sontronics STC-3X
• Elastic suspension
• Pop filter
• 5m XLR cable
• Microphone bag

Data for the STC-3X:

• Multi-pattern large diaphragm condenser microphone (omnidirectional, cardioid, figure eight)
• 1" Gold-sputtered dual-diaphragm
• Ideal for speech and vocals, acoustic guitar, piano, drums, percussion
• High transparency
• Open, silky sound
• 3-Stage high-pass filter (linear, 75 Hz - 150 Hz)
• 3-Stage pad (0dB, -10dB, -20dB)
• Frequency range: 20 Hz - 20 kHz
• Max. SPL (sound pressure level): 125 dB
• Impedance: 200 Ohm
• Dimensions (H x W x D): 194 x 53 x 53 mm
• Weight: 640 g
• Colour: Black