Large Diaphragm Microphones

• Double-large diaphragm capsule: 28.25 mm
• Switchable polar pattern: cardioid, omnidirectional and figure eight
• Gain switch +10 dB
• Attenuation switch-10 dB
• Low-noise FET circuit
• Capacitors with high resolution
• Output transformer hand wound
• Circuit Design: Solid-State Low-Noise FET
• Type: Pressure gradient condenser microphone
• Frequency response: 25 - 20000 Hz
• Dynamic range: 120 dB minimum
• Impedance:
• Max. SPL: 0.5% THD @ 1000Hz: 130 dB
• Noise:
• Sensitivity: 16 mV / Pa OR -36 ± 2 dB 0 dB = 1 V / Pa 1000 Hz
• Requires 48 V phantom power
• Includes shock mount and wooden storage box

• Directional characteristic: Cardioid
• High SPL (sound pressure level) capability
• Includes a shock mount

15 Year manufacturer warranty if product is registered within 30 days after purchasing at audio-technica.com

• Polar pattern: cardioid or omnidirectional
• Max. sound pressure level: 135dB SPL
• Frequency range: 30 - 18,000 Hz
• Hi-pass filter optionally at 100 Hz or 200 Hz
• Impedance: 170 Ohm
• Sensitivity: -46 dBv
• Weight microphone: approx. 0.5 kg
• Incl. a power supply with a connection cable and a case

• With K67 capsule
• Switchable directional characteristics: Omni / Cardioid / Figure-8
• Switchable 10 dB pre-attenuation
• High pass filter
• Frequency response: 20 Hz - 20 kHz
• Requires 48V phantom power
• Pearl-grey surface
• Comes in a wooden case

Optional shock mount 125520 (not included)

• Pressure gradient transducer
• Polar pattern: Cardioid
• Frequency response: 40 - 16,000 Hz
• Sensitivity at 1 kHz into 1 kOhm: 8 mV / Pa
• Rated impedance: 150 Ohm
• Rated load impedance: 1 kOhm
• Equivalent noise level, CCIR: 25 dB
• Equivalent noise level, A-weighted: 18 dB-A
• Signal-to-noise ratio, CCIR (rel. 94 dB SPL.): 69 dB
• Signal-to-noise ratio, A-rated (rel. 94 dB SPL.): 76 dB
• SPL for THD
• With preattenuation: 147 dB
• Maximum output voltage for THD
• Requires 48 V phantom power
• XLR connector
• Weight: 710 g
• Diameter: 63 mm
• Length: 160 mm
• Incl. wooden case and certificate

• Double-large diaphragm capsule: 31.25 mm
• Switchable polar pattern: cardioid, omnidirectional and figure eight
• Gain switch +10 dB
• Attenuation switch-10 dB
• Low-noise FET circuit
• Capacitors with high resolution
• Output transformer hand wound
• Circuit Design: Solid-State Low-Noise FET
• Type: Pressure gradient condenser microphone
• Frequency response: 25 - 20000 Hz
• Dynamic range: 120 dB minimum
• Impedance:
• Max. SPL: 0.5% THD @ 1000Hz: 130 dB
• Noise:
• Sensitivity: 16 mV / Pa OR -36 ± 2 dB 0 dB = 1 V / Pa 1000 Hz
• Requires 48 V phantom power
• Includes shock mount and wooden storage box

• Pressure gradient condenser
• Polar pattern: cardioid, omnidirectional and eight
• Capsule: TK51
• Frequency range: 20 - 20,000 Hz
• Sensitivity: 19 mV / Pa
• Impedance: 300 ohms
• Max. sound pressure level: 128 dB
• Tube: 6072A
• Custom Haufe transformer
• Dimensions: 200 x 46 mm (length x diameter)
• Weight: 0.62 kg
• Includes power supply, microphone shock mount and holder, 7-pin connection cable, dust cover and transport case

• Consisting of sE X1S microphone, sE RF-X acoustic screen, elastic suspension with pop screen and 3m microphone cable

Features sE X1S Microphone:

• Large-diaphragm condenser microphone
• Polar pattern: Cardioid
• Handmade capsule
• LoCut filter: 80 Hz, 160 Hz
• Pad: 0 dB, -10 dB, -20 dB
• Gold-plated XLR contacts
• Noise: 9 dB (A)
• Boundary sound pressure level: up to 160 dB (THD 0.5%)
• Requires 48V phantom power

Features sE RF-X Acoustic Screen:

• Acoustic screen to reduce the influence of the room in microphone recordings
• Effective multi-layer technology
• Due to its low weight it is compatible with almost any microphone stand
• Diameter / width: 41 cm
• Height: 31 cm
• Depth: 20 cm
• Weight with clamp: 1.6 kg
• Weight without clamp: 1.1 kg

Bundle offer comprising

• Large-diaphragm condenser microphone
• 8 Directional characteristics to choose from
• 5 Front characteristics: omnidirectional, wide cardioid, cardioid, supercardioid, and figure-8
• Gold-plated 25.4 mm capsule
• Dynamic range: 134 dBA
• Max. SPL (sound pressure level) (0.5% THD): 140 dB
• Robust zinc diecast housing
• Gold-coated 3-pin XLR plug
• Dimensions: 138 x 52 x 36 mm
• Weight: 310 g
• Incl. DTP 40 Lb leather case, LCT 40 SH microphone shock mount, LCT 40 PSx of magnetic pop filter, LCT40 Ws windshield

• Pop Filter with 3D Arm
• Exclusive Thomann Edition
• Lightweight and space-saving
• Perfect for travelling
• Multiple ball joints for flexible adjustment
• Solid clamp with wide clamping range from 15 to 35 mm
• High-quality pop filter with double-covered nylon and large screen diameter of 15.7 cm
• The 360° rotation possibilities of the three joints offer the option to mount the pop filter in any position
• Arm length: 62.5 cm
• Weight: 377 g

Bundle offer comprising

• Large Diaphragm Condenser Microphone 
• Polar pattern: Cardioid 
• Signal-to-noise ratio: 90 dB (A)
• Max. sound pressure level: 136 dBSPL, 0 dB pre-attenuation
• Sensitivity: 41 mV / Pa, -28 dBV / Pa
• Pad switchable in three steps: 0 dB, -6 dB and -12 dB
• Low cut switchable in three steps: linear, 80 Hz (6 dB / octave) and 160 Hz (6 dB / octave)
• Dimensions: 158 x 52 x 36 mm
• Weight: 371 g

• Microphone Stand with Boom Arm
• Can be folded very compactly
• Length adjustable from approx. 0.68 - 1.56 m
• Boom arm length: 60 cm
• Boom arm joint can be fixed with only one screw
• 5/8" threads
• Weight: 2.1 kg
• Colour: Black

• Pattern: Cardioid, omnidirectional, figure 8, broad cardioid and supercardioid
• Via the POLARIZER plug-in (available on the manufacturer website), change the material you have already recorded dynamically by adjusting the polar pattern, add or subtract room, and even turn your microphone by 180°
• Gold-coated capsule
• Neutral frequency response
• 4 Low-cut and pre-attenuation settings
• Robust metal construction
• Frequency range: 20 - 20000 Hz
• Dynamic range: 121 dB-A
• Max SPL 0.5% THD: 132 dB
• Impedance:> 120 ohms
• Dimensions: 158 x 52 x 36 mm
• Weight: 425 g
• Includes transport hard case, LCT 40 SHx shock mount, LCT 40 Wx Windshield, LCT 50 PSx pop protection and DTP 40 Lb pouch

Bundle offer comprising

• Tube condenser microphone
• Pressure gradient transducer with the same large diaphragm capsule of the legendary U 47 and M 49
• Directional characteristics: cardioid
• Frequency range: 20 - 20,000 kHz
• Max. sound pressure level: 114 dB for K
• Max. 8 dBu output voltage
• Nominal impedance: 50 Ohm
• Nominal load impedance: 1 kOhm
• Dimensions (diameter x length): 57 x 142 mm
• Weight: 460g
• Incl. swivel mount, N 149 A universal power supply with mains cable and aluminium case

• Elastic Microphone Shock Mount
• For M147, TLM 103, TLM 193
• Colour: White

Includes:

• 2 x TLM 103 (mt) large diaphragm microphones with cardioid polar pattern
• 2x EA1 (mt) Microphone suspension
• 1x Aluminium case - suitable for 2 microphones and 2 shock mounts

• Specially designed for kick drum microphones
• Also suitable for picking up bass amplifiers, deep woodwinds and brass instruments etc.
• Frequency range: 20 - 20000 Hz
• Polar pattern: Cardioid
• Pad switch: 0dB, -15 dB
• Impedance:
• Equivalent noise level: 14 dB (A)
• Sensitivity: 6 mV / Pa
• Maximum SPL (0.5% THD @ 1000 Hz): 155 db (with 15 dB Pad)
• Requires 48V phantom power
• XLR connector
• Dimensions: 144 x 72 x 72 mm
• Weight: 804 g
• Includes microphone holder and aluminium case

Bundle offer comprising

• Dynamic Broadcast Microphone
• Suitable for Broadcasts, Podcasts, Studio etc.
• Cardioid polar pattern reduces feedback
• Built-in pop filter and shockmount for reducing vibration noise
• Shielded against electromagnetic noise
• Frequency range: 20 to 20000 Hz
• Sensitivity: -57 DB +/- 3 DB
• Output impedance: 320 ohms
• XLR 3-pin connection
• 5/8" Thread
• Dimensions without bracket: diameter 50 mm X length 140 mm
• Dimensions with bracket (L x B x H): 200 x 90 x 50 mm
• Weight: 450 g
• Colour: Black

• Microphone Preamplifier
• Extremely low-noise Class A JFet amplifier
• For dynamic and ribbon microphones
• 2 Matched JFet transistor pairs
• Input: Balanced 3-pin XLR female
• Output: Balanced 3-pol. XLR male
• Input impedance: 20 kOhm
• Gain: 28 dB (@ 3 kOhm source impedance)
• Frequency response: 10 - 50,000 Hz (+/- 1 dB)
• Requires phantom power: 24 - 48 V.
• Dimensions (L x W): 77 x 22 mm
• Weight: 35 g
• Developed and produced in Germany

Note: Does not allow phantom power to pass through to the microphone

Includes:

• 1 x TLM 103 (mt) large diaphragm microphone with cardioid polar pattern
• 1x EA1 (mt) Microphone suspension
• 1x Aluminium case - suitable for 2 microphones and 2 shock mounts

MXL V87; large-diaphragm FET condenser microphone; ideal for acoustic guitars, pianos, voice and vocal recording; 32mm capsule; frequency response: 20Hz - 20kHz; polar pattern: cardioid; impedance: 200Ohm; signal-to-noise ratio: 85.5dB (A-weighted); max. SPL at 0.5% THD: 136dB; power requirements: 48V phantom power; nickel-plated metal housing; included in delivery: pop filter (PF-005-SS), shock mount (USM -002) and hard mount (V6-H); dimensions (L x D): 190 x 47mm; weight: approx. 500g

• Includes Edge Real-Time Modelling software for classic studio microphone emulation
• Can be used with any microphone pre-amplifier and audio interface of your choice - for optimal results in terms of your sound, we recommend the Antelope Audio Interface with FPGA Real-Time Modeling
• Polar pattern: Cardioid
• Low-vibration housing
• Low-noise and low-distortion circuit design
• Requires 48 V phantom power
• Frequency response: 20 - 20000 Hz
• Sensitivity: -35 dB / 18 mV/Pa (-1 to +3 dB)
• THD+N: 116 dB
• Inherent noise: 19 dB (A)
• Signal-to-noise ratio: 75 dB (A)
• Output impedance: 50 Ohm @ 1kHz
• XLR connector
• Dimensions: 134 x 52 mm
• Weight: 320 g
• Microphone case and tripod holder included

Note: The software requires iLok USB Copy Protection Connector (article no. 401447 - not included) when operating without the Antelope Audio Interface.

Included microphone emulations:

• Berlin 47 FT
• Berlin 49T
• Berlin 57
• Berlin 87
• Berlin 67
• Berlin M103
• Vienna 12
• Vienna 414
• Tokyo 800T
• Berlin V563 cardioid capsule
• Illinois 57
• Illinois 7B
• Minnesota 20
• Vienna 112
• Berlin K86
• Berlin 47 TU
• Berlin M251
• Hamburg 441
• The scope of the emulations is constantly being expanded

System requirements:

• At least Core 2 Duo CPU
• At least 4 GB RAM
• OS X 10.11, Windows 10 or higher

Bundle offer comprising

• Large diaphragm microphone
• With K67 capsule
• Switchable directional characteristics: Omni / Cardioid / Figure-8
• Switchable 10 dB pre-attenuation
• High pass filter
• Frequency response: 20 Hz - 20 kHz
• Requires 48V phantom power
• Pearl-grey surface
• Comes in a wooden case

Optional shock mount 125520 (not included)

• Shock Mount
• For the U 87 microphone
• Swivel mount with with 5/8"-27 thread
• Includes reducer for connecting to 1/2" and 3/8" thread studs
• Weight: 500 g