Large Diaphragm Microphones

Bundle offer comprising

• Dynamic Broadcast Microphone
• Suitable for Broadcasts, Podcasts, Studio etc.
• Cardioid polar pattern reduces feedback
• Built-in pop filter and shockmount for reducing vibration noise
• Shielded against electromagnetic noise
• Frequency range: 20 to 20000 Hz
• Sensitivity: -57 DB +/- 3 DB
• Output impedance: 320 ohms
• XLR 3-pin connection
• 5/8" Thread
• Dimensions without bracket: diameter 50 mm X length 140 mm
• Dimensions with bracket (L x B x H): 200 x 90 x 50 mm
• Weight: 450 g
• Colour: Black

• Microphone Preamplifier
• Extremely low-noise Class A JFet amplifier
• For dynamic and ribbon microphones
• 2 Matched JFet transistor pairs
• Input: Balanced 3-pin XLR female
• Output: Balanced 3-pol. XLR male
• Input impedance: 20 kOhm
• Gain: 28 dB (@ 3 kOhm source impedance)
• Frequency response: 10 - 50,000 Hz (+/- 1 dB)
• Requires phantom power: 24 - 48 V.
• Dimensions (L x W): 77 x 22 mm
• Weight: 35 g
• Developed and produced in Germany

Note: Does not allow phantom power to pass through to the microphone

• With a 1.07" double diaphragm, switchable polar pattern (omnidirectional, cardioid, eight) and high-pass filter, the SC1100 is suitable for all studio situations.
• Switchable polar pattern: Omni-directional, figure-eight and cardioid
• Low cut switch
• Frequency response: 20 - 20.000 Hz
• Sound pressure limit: 123 dB
• Sensitivity: 39.4 mV/Pa
• Output impedance: 200 Ohm
• Distortion:
• Equivalent noise level [dB(A)]: 8.2 (ball)/ 6.8 (super-cardioid)/ 6.7 (eight)
• Power supply via phantom power 48 V (±4 V)
• Weight 941 g
• Includes aluminum case and new shock-mount

• Switchable directional characteristics: omni, cardioid, hyper cardioid, figure eight
• Freely configurable polar pattern via PolarDesigner plug-in for Win and Mac
• Real-time polar patterning via OCR8 Bluetooth dongle (Art.467336 - not included) and PolarPilot app for Android and iOS
• Handmade CKR12 ceramic capsule based on the CK12 capsule
• Frequency range: 20 - 20,000 Hz
• Sensitivity: 13 mV / Pa
• Output impedance: 2 x 275 ohms (balanced)
• Input impedance: 1 kOhm
• Max. SPL: 148 dB / 158 dB (with pad)
• Noise:
• Signal-to-noise ratio:> 84 dB
• Requires 48 V phantom power
• Low Cut Filter: 40, 80 and 160 Hz
• Pad: -10 dB and -20 dB
• Includes elastic shock mount, microphone clamp, windscreen, mini XLR adapter and case
• Dimensions: 157 x 63 x 35 mm
• Weight: 0.36 kg

• 20 Hz to 20 kHz frequency range
• Cardioid
• Roll-off attenuator switch
• Phantom power (48V)
• Robust housing
• 10 dB pad switch
• Including spider and case

• Successor to the C 414B-TLII
• Now with 9 switchable polar patterns (cardioid, wide-cardioid, hypercardioid, omnidirectional, figure-8 + 4 intermediate positions)
• Frequency range: 20 - 20,000 Hz
• Dynamic range: 140 dB(SPL) max
• Improved detail above 4kHz
• Lock mode to save the settings
• Peak-Hold display
• Status LEDs
• 3-Way switchable bass cut filter (0/40/80/160 Hz)
• 3 Preattenuation pads (0/-6/-12/-18 dB)
• Microphone capsule: CK12
• Transformerless XLR Output (FET)
• Incl. elastic mount (H85), pop filter (PF80), windshield (W414X) and aluminium case

• TG transistor circuit
• Directivity: Cardioid and ball
• Built-in 4-step EMI "Tape Equalizer" section for sound shaping
• "Dual Tone System" - Circuit A for classically centered TG transistor sound
• Circuit B for high-level sound sources
• Switchable high-pass filter with 50 Hz or 90 Hz
• Switchable -10 dB pad
• Includes external power supply, elastic suspension, Mogami microphone cable (7.5 m) and wooden box

Bundle offer comprising

• Condenser Microphone
• 16 mm diaphragm
• Cardioid characteristic
• Frequency range: 20 - 20000 Hz
• Signal-to-noise ratio: 74 dB, 1 kHz at 1 Pa
• Dynamic range: 124 dB (typical), 1 kHz max. SPL
• Sensitivity: 7 dB (14.1mV) re1V at 1Pa
• Impedance 100 Ohm
• Max. SPL: 144 dB (1kHz, 1% THD)
• Requires 48V phantom power
• Dimensions 162 x 52 mm
• Weight 345 g
• Incl. mount and pouch

• Mounting Popkiller
• With elastic arm
• Arm length: 20 cm
• Edge-Ring: Ø 15.5 cm
• Nylon-Cover: Ø 14 cm

• With 5 polar patterns: omnidirectional, wide cardioid, cardioid, supercardioid, Figure 8 characteristic
• Bass reduction: 40 Hz or 100 Hz switchable
• Level reduction: -6 dB or -12 dB switchable
• Navigation switch with LED display for directional characteristic
• Low-cut and pre-attenuation
• Max sound pressure level: 141 dB (153 dB at -12 dB pad)
• Replacement noise level
• A-rated: 10 dB-A
• Diameter: 64 mm
• Length: 145 mm
• Weight: 445 g
• Colour: Nickel matte
• Incl. SG2 swivel joint and wooden case

• Switchable large-diaphragm microphone with 5 directional characteristics: omnidirectional, wide cardioid, cardioid, hyper-cardioid, figure eight
• Bass reduction 40 Hz or 100 Hz switchable
• Level reduction -6 dB or -12 dB switchable
• Navigation switch with LED indicator for directional characteristics, low-cut and pre-attenuation
• Boundary sound pressure level 141 dB (153 dB at -12 dB pad)
• Spare noise level A-weighted: 10 dB-A
• Weight: 445 g
• Diameter: 64 mm
• Length: 145 mm
• Colour: Nickel
• Finish: Matte
• Scope of delivery: TLM 107, EA 4 elastic suspension

Bundle offer comprising

• Large Diaphragm Condenser Microphone
• 3 Switchable characteristics: Cardioid, omnidirectional, figure eight
• Frequency range: 20 - 20,000 Hz
• Switchable Low-Cut 80 Hz
• Switchable -10 dB pad
• Impedance: 120 Ω
• 149 DB SPL max.
• Weight: 412 g
• Incl. AT 8458 Tripod adapter and bag

• Professional Popkiller
• For all standard microphone stands
• Double nylon screen
• Stable plastic frames
• Can be attached to pipe diameter up to 30 mm
• Gooseneck length: 330 mm
• Screen Ø: 130 mm
• Weight: 0.18 kg
• Colour: Black

• Microphone Stand with Boom Arm
• Cast base with foldable feet
• Metal tommy screw on the boom joint
• 3/8" Threads for microphone clamp
• Includes 3/8" to 5/8" thread adapter
• Height adjustable from 105 - 170 cm
• Adjustable arm: 75 cm
• Colour: Black

• Professional microphone cable
• Length: 10 m
• Black Yongsheng XLR plug (made by Neutrik)
• XLR male --> XLR female
• Incl. hook and loop fastener

• Hand-selected 3-micron capsule with dual diaphragm
• Infinitely variable directional characteristics: omni, cardioid and figure eight
• Frequency range: 20 - 20,000 Hz
• Max. sound pressure level: 132 dB
• Internal hi-pass filter
• Internal -15 dB pad
• Jensen Audio Transformer
• Military grade JAN 5840 tube
• Colour: Satin nickel
• Includes power supply with connection cable to the microphone, elastic suspension, and transport case

• Includes Classic Tubes & Virtual Preamp Collection
• Neutral ML-1 condenser microphone, which is tuned to the VMS hard- and software (VMS preamplifier optional - not included)
• VMS plug-in software can completely change sound characteristics even after recording
• Virtual selection of classic vintage microphones and preamp models as well as unique models for advanced recording techniques (may require download and purchase from manufacturer site)
• Software Type: Virtual modelling
• Platform: Mac, PC
• Format: AAX, AU, RTAS, VST
• Hardware requirements Mac: Dual Core Intel processor, 2 GB RAM
• Hardware requirements PC: Dual Core Intel / AMD processor with SSE2 support, 2 GB RAM
• OS requirement Mac: OS X 10.7 or higher
• OS requirement PC: Windows 7 or higher
• Included in delivery: ML-1 large diaphragm condenser microphone, microphone spider, case, software license code

Note: Requires copy protection iLok Cloud service or iLok 2 / iLok 3 (401447, not included)

• Handmade in U-47 style
• Rogers board with a point-to-point wiring
• Polar pattern: cardioid and omnidirectional
• Frequency range: 20 - 20,000 Hz
• Max. SPL: 140 dB
• Equivalent noise level: 10 dB
• Impedance: 200 Ohm
• An integrated NOS Telefunken tube of the 800 series
• Incl. power supply with connection cable, spider and transport case

With nine different directional characteristics, the M 149 Tube can be adapted to very different acoustic recording situations. Like its ancestors, it is particularly suitable for speech and song. This is not only due to its capsule, but also the particularly low replacement noise level of its modern circuit technology.

The M 149 tube is discussed from the side. Its front side is marked by the company nameplate and the directivity switch. Below the capsule, a dome ensures dispersion of sound from the upper half-space, so there is no disturbing interference with the direct sound components. To protect against structure-borne sound, the capsule is elastically mounted. The capsule is surrounded by the large microphone basket of the old M 49, which is now acoustically more open and behaves sound-neutral.

There are nine characteristics to choose from: Omnidirectional, wide cardioid, cardioid, hyper cardioid and figure eight, each with an intermediate position.

Unlike other tube microphones, the M 149 Tube combines a specially selected tube (triode) with state-of-the-art circuitry. The aim of the development was to use the special transmission characteristics of a tube and to bring the hereby amplified capsule signal controlled, unadulterated and feedback-free to the microphone output. Therefore, the usual in tube microphones output transformer is not used. Instead, to drive the different output loads, a particularly suitable for audio signals integrated amplifier with very low distortion (THD

On the back of the microphone is another slide switch. It operates a high-pass filter whose cut-off frequency (3 dB) can be selected in half-octave steps between 20 Hz and 160 Hz. In this way disturbances of air conditioners or impact sound can be faded out in a very targeted manner. In addition, e.g. the volume of a voice can be flexibly measured using the proximity effect.

The M 149 Tube is powered by an 8-core cable from its special N 149 power supply. At its output, the microphone signal is on a 3-pin XLR connector. The microphone is supplied in an aluminium case as a set together with the 8-pin microphone cable, the power supply N 149 and the elastic suspension EA 170.

• Acoustic operation Pressure gradient receiver
• Polar pattern: Omnidirectional, cardioid, wide cardioid, hyper cardioid, figure eight and one intermediate position each
• Transmission range: 20 Hz ... 20 kHz
• Field transmission factor at 1 kHz at 1 kOhm: 34/47/62 mV / Pa (Omnidirectional, / cardioid / figure eight)
• Nominal impedance: 50 ohms
• Nominal load impedance: 1000 ohms
• Replacement noise level CCIR468-3: 28/25/23 dB (omnidirectional / cardioid / figure eight)
• Replacement noise level DIN / IEC651: 16/13/11 dB-A
• Noise level CCIR 468-3: 66/69/71 dB
• Noise level DIN / IEC651: 78/81/83 dB
• Limit sound pressure level (tube characteristic) for K
• Maximum output voltage 18 dBu
• Dynamic range of the amplifier DIN / IEC651 for K
• Power Supply Power Supply N 149
• Weight 730 g
• Diameter 70 mm length 201 mm
• Including aluminium case, 8-pin microphone cable, power supply N 149 A, elastic suspension EA 170, dust bag

• For direct operation with a computer, tablet or mobile phone (iOS)
• No additional drivers necessary
• Directional characteristic: Supercardioid
• Frequency range: 30 - 18,000 Hz
• Sensitivity: 32 dB (0 dB = 1 V/Pa at 1 kHz)
• Max. SPL (sound pressure level): 130 dB (@ 1 kHz = 1% T.H.D)
• 16-Bit/48 kHz
• Gain control
• Headphone output with direct monitoring and volume control
• Mute button
• Includes a microphone clamp, table stand, USB-C to USB cable and USB-C to USB-C cable

• Polar pattern: Cardioid
• Frequency range: 20 - 18.000 Hz
• Sensitivity: 18 mV/Pa -36 +/-2 dB (0 dB=1V/Pa 1000 Hz)
• Equivalent sound pressure level: 18 dB (A weighted)
• Max. SPL for 0.5 % THD @1000 Hz: 126 dB
• External low cut and -10db pad switch
• Balanced transformer
• Requires 48V phantom power
• Connection: 3-pin XLR
• Dimensions (max. diameter x length): 50.5 x 190 mm
• Incl. Shock mount and PVC case