|
|
Black Lion Audio PG-P Type F; portable power conditioner; six filtered and surge protected outputs; surge energy rating: 540 joules; connections: EU Schuko type F combination plugs; status LEDs for grounding, active protection and active filtering; rugged enclosure; 3m power cable; dimensions (LxWxH): 245 x 115 x 44mm
|
Price History: Black Lion Audio PG-P Type F
79.00 $ |
|
|
Power Conditioner
- Mains current filter and power distributor with 10A
- Rated power up to 2300 watts
- AC noise filter to reduce interference from radio frequencies and electromagnetic interference
- Overvoltage protection
- Circuit breaker
- For all applications in recording and on stage
- 8 Switchable ports on the back + 1 unswitched on the front
- Main power switch on the front
- Dimensions (W x H x D): 482 x 190 x 44 mm
- Format: 19"/ 1U
- Includes 4 IEC cables
|
Price History: Adam Hall AHPCS10 Power Conditioner
125.00 $ |
|
|
Professional Power Conditioner and Filter
- With 10 A maximum output current
- 10x Euro rear panel outlets and one front panel convenience outlet
- 2x Pull out multi LED, dimmable lamps
- With 20 LEDs voltmeter monitors and displays incoming line voltage
- With SMP (Series Mode Protection) maintenance-free surge protection
- With LIFT (Linear Filtering Technology) noise filtration
- EVS (Automatic Extreme Voltage Shutdown) for shutdown / separation with permanent / extreme overvoltage
- Resettable circuit breaker
- Rear panel BNC connector with switch for optional gooseneck lamp (12 V / 0.5 A)
- Design: 19" / 1U
|
Price History: Furman PL-Plus CE
469.00 $ |
|
|
Black Lion Audio PG-2 Type F; Power Conditioner; total of 14 switchable, filtered and surge protected outputs; with PG-99 filter technology; 12 filtered outputs at the rear of which four are time-delayed for high current components (e.g. amplifiers or active speakers); two filtered outputs, one 3-pin XLR lamp connector and one USB-A charging socket at the front; one additional 3-pin XLR lamp connector at the rear; LED indicators for input voltage level, grounding, polarity, noise filtering, and AC voltage and surge protection; voltage and current meter integrated; audible and visual warning signals; surge energy rating: 2775 joules; voltage: 230V AC; maximum load: 15A; connections: EU Schuko type F safety contact combination sockets, ground clamp, 3-pin XLR lamp connector, USB-A and power connector; design: 19" 2U; dimensions (W x H x D): 438 x 88 x 250mm; weight: 6.8kg
|
Price History: Black Lion Audio PG-2 Type F
535.00 $ |
|
|
Professional Power Conditioner and Filter
- Maximum output current: 10 A
- 2x Pull-out multi LED, dimmable lamps
- SMP (Series Mode Protection) maintenance-free surge protection
- LIFT (Linear Filtering Technology) noise filtration
- EVS (Automatic Extreme Voltage Shutdown) for shutdown / separation with permanent / extreme overvoltage
- Resettable circuit breaker
- Rear panel BNC connector with switch for optional gooseneck lamp (12 V / 0.5 A)
- Format: 19 "/ 1U
- 10x Euro-plug outlets
|
Price History: Furman PL-8 CE
379.00 $ |
|
|
Power Conditioner
- With rack light, voltage and current display
- Power filter and power distribution 10 A including pull-out rack light
- Maximum output current up to 2300 watt
- AC Noise filter to reduce the noise caused by radio frequency and electromagnetic interference
- Overvoltage protection
- Circuit breaker
- For all applications in recording and on stage
- 8x Switchable rear panel connections + 1x non-switchable port on the front
- Main power switch at front panel
- Dimensions (W x H x D): 482 x 190 x 44 mm
- Design: 19" / 1U
- Including 4x Power cords
|
Price History: Adam Hall PCL 10 Pro Power Conditioner
238.00 $ |
|
|
Contractor Series Smart Sequencer
- 9 Outlets
- Mains distribution / filter / protection and remote capable sequential on / off switching (three-stage on / off delay)
- 16 A rated power
- Complex A / V systems can be switched on / off safely and sequentially and the power supply can be controlled remotely
- Multiple units may be daisy chained
- RS-232 can be integrated
- With optional Ethernet adapter via network / web remote capable
- With multi-level protective circuit design against voltage spikes and fault voltages as well as filters against signal interference
- Fire alarm shutdown
- Format: 19"/ 1 U
- 15-Year manufacturer's warranty
|
Price History: Furman CN-3600 SE
859.00 $ |
|
|
Power Conditioner and Rack light 19" 1U
- Power filter and power distribution with 10 A maximum output current (2300 Watt)
- Suitable for live applications and recording
- AC Noise filter
- Circuit breaker
- Two retractable LED light fixtures with dimmer control
- 10x rear panel outlets and 1x front panel convenience outlet
- Protection OK indicator
- Overvoltage protection
- Main power switch at front panel
- 19" / 1U
- 19 cm Depth
- Weight 2.3 Kg
|
Price History: Furman M-10Lx E
198.00 $ |
|
|
Compact Power Conditioner
- 10 A (2300 Watt max.)
- For video and audio applications
- Technology from the PL series
- LiFT offers linear AC power filtering to ensure clean power for unequaled audio & video clarity
- Transient voltage surge suppressor, SMP (Series Multi-Stage Protection Plus)
- Automatic shutdown when external overvoltage over 270 V
- IEC320 Input and 2x IEC320 outputs
- Ready for mounting, for example, directly to the back of plasma or LCD screens
- Dimensions: 45 x 216 x 127 mm
- Weight: 1.36 kg
|
Price History: Furman AC-210 A E Power Conditioner
185.00 $ |
|
|
30 Amp Voltage Regulator
- Regulates voltages between 188 - 270 volts to 230 volts
- Integrated mains filter against interference
- Protective circuit design against voltage spikes and transients
- Rated power: 30 amps (6900 watts)
- Voltage meter
- USB charging socket
- 2 x IEC outlet on the front
- 6 x IEC outlet on the back
- 2 x IEC outlet 16 A on the rear
- Mains supply via 32A CEE 3-pin blue
- Response time 1 nanosecond
- LIFT (Linear Filtering Technology)
- Dimensions: 19", 2U
- W 483 mm x D 597 mm incl. line cord connector x 133 mm
- Weight: 26 Kg
- Power consumption: 5 watts
|
Price History: Furman P-6900 AR E
4,199.00 $ |
|
|
Power Voltage Regulator
- Protection circuits and noise filter
- Prestige series
- Operating voltage 174-264 Volt; maximum surge current 6 Amps (1400 Watt max.)
- Full featured power conditioner
- Filter against voltage spikes / transients and electromagnetic interference
- With SMP (Series Mode Protection) maintenance-free surge protection (detected within 1 nanosecond, absorbed and dissipated)
- LIFT (Linear Filtering Technology) noise filtration (10 dB @ 10 kHz, 40 dB @ 100 kHz, 50 dB @ 500 kHz)
- With EVS (Extreme Voltage Shutdown Automatic) for shutdown / isolation with overvoltage
- Adjusted and stabilized voltage output over 10 x
- Rear panel and 1x front IEC 320 connectors with central switch in front
- Resettable circuit breaker
- Rear panel BNC connector with switch for optional gooseneck lamp (12 V / 0.5 A)
- Protection OK and Extreme Voltage indicator for status function / protection mode
- Depth: 30.5 cm
- Format: 19 ", 1U
- Dimensions: 483 x 305 x 45 mm
- Weight: 7 kg
|
Price History: Furman P-1400 AR E
1,835.00 $ |
|
|
Power Conditioner with Rack Light
- Power filter and power distribution with 10 A
- With extendable rack light
- Maximum output current up to 2.3 kW
- AC noise filter to reduce the noise caused by radio frequencies and electromagnetic interference
- Overcurrent protection
- Circuit breaker
- For all applications in recording and on stage
- 8x Switchable rear panel connections + 1x non-switchable port on the front
- Main power switch at front panel
- USB lamp connector on the back
- Dimensions (W x H x D): 482 x 190 x 44 mm
- Design: 19 ", 1U
- Including 4x Cold device plugs and LED gooseneck lamp with USB connection for lighting the rear side of the rack
|
Price History: Adam Hall PCL 10 Power Conditioner
133.00 $ |
|
|
Power Conditioner and Voltmeter
- With dimmable and pull-out LED rack lighting as well as LCD input voltage display
- 16 A Maximum output current (Max. 3680 Watt)
- Front panel convenience charger allows you to charge most media devices or power a USB lamp.
- Maintenance-free overvoltage protection
- 10x IEC-320 Rear panel outlets and one front panel convenience outlet
- SMP (Series Mode Protection) maintenance-free surge protection
- Transient voltage surge suppressor
- With LIFT (Linear Filtering Technology) noise filtration (10 dB @ 10 kHz, 40 dB @ 100 kHz, 100 dB @ 10 MHz)
- Rear panel BNC connector powers any standard gooseneck lamp (12 V, 0,5 A), switchable on the front
- Dimensions: 19" / 1U
- Installation depth 26.7 cm
- Weight: 4.6 kg
|
Price History: Furman PL-Pro DMC E
759.00 $ |
|
|
Network Stabiliser
- To compensate for short fluctuations in the mains voltage and to protect against overvoltage
- Protects expensive equipment in studios, rental and pro AV areas
- Also acts as a power distributor
- Display for voltage and current on the front panel (switchable)
- Construction principle: microprocessor-controlled toroidal core autoformer
- 4 x Sockets on the back of the device (CEE 7/3) each with its own thermal overload protection (10 A)
- Working range: 190 - 253 volts AC
- Automatic safety shutdown at 275 V.
- Input: 1x Power Twist type TR1 (max. 16 A total current)
- Front USB for charging and operating mobile devices (no data exchange)
- Format: 19"/ 2U
- Dimensions (W x H x D): 483 x 400 x 88 mm
- Weight: 15 kg
- Includes power cord
|
Price History: the t.racks Power Conditioner 12
399.00 $ |
|
|
Power Conditioner 19" / 1U
- Power filter and power distribution with 10 A maximum output current (2300 Watt)
- AC noise filtering to reduce radio frequency and electromagnetic interference (RFI/EMI) >20 dB
- 1.5 - 20 MHz
- Circuit breaker
- For all applications in recording and on stage
- 10x Rear panel outlets and 1x front panel convenience outlet
- Protection OK indicator
- Overvoltage protection
- Main power switch at front panel
|
Price History: Furman M-10x E
138.00 $ |
|
|
AC Power Sequencer / Filter
- 10 A (2300 Watt max.)
- IEC-320 Connectors 230 V: 8x rear panel and 1x front side
- SMP (Series Mode Protection)
- LIFT (Linear Filtering Technology) noise filtration (10 dB @ 10 kHz, 40 dB @ 100 kHz)
- Delay with 3 offsets for 3 groups with each 2 IEC C13 outlets
- Adjustable time delay of 0.5 - 10 seconds
- Auto reset after overvoltage
- Circuit breaker
- Rear panel BNC connector for gooseneck lamp (12 V, 0.5 A)
- Switchable from the front
- Format: 19 "/ 1 U
- Installation depth: 18 cm
- Weight: 3.2 kg
|
Price History: Furman PS-8R/E III
535.00 $ |