Tube Guitar Heads

Bundle offer comprising

• Tube Head
• Preamp based on the classic JCM 800 2203
• 20 Watts with power reduction to 5 watts
• Tubes: 2x ECC83, 1x ECC83 (Phase Splitter), 2x EL34
• Controls: Preamp and Master Volume, Treble, Mid, Bass and Presence
• 1 Channel with high and low sensitivity inputs
• DI out
• Serial FX loop
• Dimensions: 510 x 240 x 240 mm
• Weight: 9.7 kg
• Suitable case: Art.501854 (not included in delivery)

• Case
• Suitable for Marshall Studio Classic SC20 (Art.457019) and Marshall Studio Vintage SV20H (Art.457091)
• With 2 fixing straps and 1 shoulder strap
• Made of coated 6.5 mm birch multiplex wood
• 22 x 22 mm Aluminium edge
• Min. 10 mm foam padding
• 2 Small spring-loaded butterfly latches
• 1 Strap handle
• Small steel ball corners
• Rubber feet 25 x 11 mm
• Outer dimensions (W x D x H): 569 x 300 x 310 mm
• Weight: 5.8 kg
• Colour: Phenolic resin brown
• Made in Germany

Synergy is a modular principle - the preamp modules are interchangeable and the amp can be thus tailored specifically to your unique sound ideas.

• Developed especially for the Synergy System
• Power: 50 W
• 2 Module slots
• 4 Channels (when 2 modules are used)
• Tube assembly: 2x 6L6, 3x 12AX7
• Controls: Presence, Density, Master Volume
• MIDI compatible
• Effects loop
• Impedance control for speaker outputs
• XLR DI output
• Dimensions: 64.1 x 25.4 x 25.4 cm
• Weight: 19.1 kg
• Includes a 4-way switch
• Made in the USA

Note: Modules are not included.

Bundle offer comprising

• Guitar Amp Head

Since the amps with the unconventional colour returned, they have been fighting for their niche in a hotly contested market with great success. Just like in the past when countless stars used these amps, Orange builds amplifiers with an unmistakable sound for people who know exactly what they want.

The AD30HTC is an amp head with pure tube sound in the classic Class A circuit (with 4 El84 amp tubes), which guarantees harmonious sounds with an impressive spectrum. The "TC" stands for "twin channel", where a lead channel available, ensuring sustain rich sounds even at lowest volume.

Separate tone controls for each channel allow flexibility, although it would be difficult to elicit lousy sounds from this amp head! 30 W Class A power is loud enough for most applications.

• Power: 30 Watt
• Class A amplifier technology
• 2 Channels
• Master volume, bass, treble, middle and gain control per channel
• 4 EL 84 Power amplifier tubes
• 4 ECC83 Preamp tubes
• Size: 55 x 24 x 24 cm
• Weight: 18 kg

• Flight Case For Guitar Amplifiers
• Suitable for diverse orange heads: AD 30HTC / -50H / -140HTC / Retro 50H / 30H Rocker / OR-50H / -80H / -120H / TH30H / CS50 Custom Shop
• 7mm Birch multiplex (with orange PVC coated)
• 30 x 30 mm Aluminium edges
• 2x Medium sprung butterfly latches
• 2x Hinged handle medium
• Medium steel corners
• Upholstered with 10 mm foam
• Overall dimensions (W x H x D): 617 x 335 x 307 mm
• Weight: 7.75 kg
• Made in Germany

• Power: 100 W
• 2 Channels
• Preamplifier tubes: 3x ECC83
• Power amplifier tubes: 4x EL34
• 1 Jack output
• Input Gain (Push/Pull: Rhythm Clip)
• Lead Master
• Output Master
• Treble
• Middle
• Bass
• Presence
• Pentode/Triode switching
• FX Loop
• DI Out
• Dimensions (W x H x D): 750 x 230 x 310 mm
• Weight: 22.1 kg
• Foot switch (channel selection) included
• Matching cover: Art.150488 (not included in delivery)

• Recording Amp
• 2 Channels
• Power: 10/25 W (switchable)
• Power amp tubes: 2x EL84
• Preamp tubes: 6x 12AX7
• Channel 1: Clean, fat and crunch mode with multi-Watt power switch
• Controls: Gain, Treble, Mid/Boost, Bass, Presence, Reverb and Master
• Channel 2: Mark IIC+ mode, Mark IV mode and Xtreme mode with multi-Watt power switch
• Controls: Gain, Treble, Middle, Bass Presence, Reverb and Master
• 5-Band graphic EQ
• Mesa Dyna-Watt technology
• Built-in CabClone: Speaker simulation (closed/opened) with integrated load resistor
• Headphone output
• Speaker on/off
• Ground-Lift switch
• Spring reverb separately adjustable for each channel
• Tube-buffered FX loop
• Footswitch connector (channel & EQ)
• Dimensions (H x W x D): 203 x 355 x 221 mm
• Weight: 7.5 kg
• Includes footswitch and cover
• Made in USA

• 3 Channels
• Power: 50 Watts
• Preamp tubes: 7x JJ ECC83S (12AX7)
• Power tubes: 2x EL34
• Controls: Volume, Gain, Low, Mid, and High EQ
• With global presence and resonance control for all 3 channels
• Channel 1 and 2 has shared volume and gain with low, mid, and high controls
• Effects loop
• 2 Speaker outputs with impedance switches - 4, 8 and 16 Ohms
• Headphone output
• Weight: 11.4 kg
• Dimensions (H x W x D): 21.6 x 50.8 x 30.4 cm
• Colour: Black
• Incl. foot switch

The amps of the Dutch company Koch are no longer an insider tip. Good tube sound, flexible, and in a fair price range - that's the most important information in advance. The Studiotone Head could appeal to all guitarists who still want to use power amp heat and distortion at tolerable volumes. On the other hand, with 20 watts, the amp also provides clean reserves, which should be sufficient in most cases.

This brings us to the clean channel: it has fender-like qualities, from fat to sparkle you can help yourself here. The overdrive channel is a real hit - warm tube pressure between British-rough and American. Sufficient gain for many people. With the Overdrive Boost channel, the same sound is simply blown even harder, which also covers HiGain applications. The 3 sounds share a tone control - no problem in the studio anyway or in any live situation, because the pre-tuning between clean and overdrive is simply right, whereby 2 voicing switches (2 for mids, 3 for treble) effectively intervene in the sound.

A highlight not only in the studio but also when it's getting tricky with the volume level in a live situation, a recording out with 2 simulated speaker types and microphone positions each is located at the back; if you want it to be silent, you can switch on the power soak and go directly into the desk completely without noise. The speaker outputs are suitable for all kinds of speakers, so you can choose the ideal speaker for your small head or take the right equipment for every possible application. Excellent tube sound with many useful features; not only for the studio!

• Tube driven
• 2x EL 84 ClassA
• Power: 20 watts
• 3 Channel
• Clean-Overdrive-Overdrive Boost
• Passive bass-mid-treble tone controls
• 2 Voicing switches: Mid Shift (2-way), Bright (3-way)
• Speaker outputs (4-8-16 Ohm)
• Speaker on/off switch
• Recording output
• Effect Loop
• Reverb
• Dimensions (W x H x D): 440 x 280 x 230 mm
• Incl. FS2-ST footswitch

• Programmable, full analogue 4-channel tube amp with built-in DSP effects
• Up to 99 programmable presets
• IR output and tube power stage
• IR output can also be used without speaker
• Built-in tuner
• 64 High-quality IRs already pre-installed
• Channels: 4
• Power: 100 W
• Preamp tubes: 5 x 12AX7
• Power tubes: 4 x EL34
• Controls: Gain, master, bass, middle, treble, deep, presence, master, mid cut
• Effects: Compressor, reverb, phaser, flanger, delay, pitch shifter, tremolo, auto and remote controlled wah, gate, graphic EQ
• Speaker outputs: 1 x 16 Ohm, 1 x 8 Ohm (2 x 16 Ohm) and 1 x 4 Ohm (2 x 8 Ohm)
• Effects loop: Pre loop, FX loop A and B
• Input: 6.3 mm Jack
• Pre loop send / return: 2 x 6.3 mm Jack
• Loop A send / return: 2 x 6.3 mm Jack
• Loop B send / return: 2 x 6.3 mm Jack
• USB
• IR output
• Bluetooth
• MIDI In and Thru
• Input for Columbus Foot Controller
• Dimensions (W x D x H): 600 x 290 x 290 mm
• Weight: 24 kg
• Handmade in Germany

• Power: 15 watts RMS - switchable to 15/7/1 / 0.5 watts
• 2 Channels
• Tube assembly: 3x ECC83, 1x ECC81, 2x EL84
• Natural Volume, Gain, Bass, Mid, Treble, Dirty Volume controls
• Mono FX loop
• Speaker outputs: 1x 16 ohms, 2x 8 ohms
• Weight: 6.4 kg
• Incl. Gigbag

• All tube
• 2 Channels: Clean and overdrive
• Power: 20 W
• 3 Preamp tubes 12AX7
• 2 Power tubes EL84
• Clean channel: Volume control and 3-position bright switch
• Overdrive channel: Gain, Master, Bass, Middle, Treble and Gain
• Global presence control
• Buffered, series effects loop
• Record out with speaker simulation
• Possibility for silent playing without connected loudspeaker cabinet
• Impedance selector switch: 8/16 Ohm
• Dimensions (W x D x H): 457 x 222 x 222 mm
• Weight: 10 kg
• Made in USA
• Including foot switch for channel change

• All tube head amp
• Power: 100 W
• 4 Channels with 4 gain controls: Clean Gain 1 - Crunch Gain 2 - Lead Gain 3 - Lead Gain 4
• Two tonally different lead sounds
• 2x Master volume
• Electronic Power Tube Monitoring
• 6L6GC Tubes
• Electronic power amp monitoring
• Adjustable effects loop (parallel - serial), also controllable by foot
• 2 Bottom Sound switches for Lead Channel 3 and Lead Channel 4
• Depth Punch
• Mid Boost switching
• Adjustable Noise Gate in lead mode now also controllable via foot
• Dimensions (L x H x D) 71 x 27 x 27 cm
• Weight: 21 kg
• Made in Germany
• Footswitch optional - 181665 Z9

• All Tube: 3x ECC83 & 2x 5881 tubes
• Power: 30 W
• Custom shop production
• Input patching
• Controller for presence - bass - middle - treble - high treble/ loudness 1 - normal/ loudness 2
• Speaker outputs for 4/ 8/ 16 Ohm
• Dimensions (W x H x D): 660 x 260 x 210 mm
• Weight: 14.6 kg

• 4 Channels: Clean, Crunch I, Crunch II, Lead
• Power: 120 W
• Full tube design - no semiconductors in the signal path
• Preamplifier tubes: 6x Engl ECC83 / 12AX7
• Power amp tubes: 2x Engl 6550
• 2 Tube-driven FX loops with separate balance controls
• Noise Gate with adjustable threshold (footswitchable)
• Engl Power Tube Monitor
• MIDI-In / MIDI thru
• Engl MIDI foot controller phantom power switch
• MIDI Channel Assignment and Controller Enable Switch
• Write / Copy (for MIDI programming)
• All switching functions MIDI programmable (excluding Power and Stand By)
• S.A.C.: Serial Amp Control port
• Sound Switching options: Input Lo / Hi, Bright, Preshape, Contour (Clean, Crunch I), Mid Le./Bo., Depth Boost, Gain Lo / Hi, Contour (Crunch II, Lead), Rough / Smooth
• Controls: Gain (separate for each channel), Bass, Mid Lean, Mid Bold, Treble (Clean, Crunch I), Bass, Middle, Treble, Tone Balance (Crunch II, Lead), Volume (separate for each channel), Presence A, Presence B, Master A, Master B
• Controls (rear side): Noise Gate Threshold Level, FX Loop I Balance, FX Loop II Balance
• Outputs: 1 x 4 Ohm, 2 x 8 Ohm, 2 x 16 Ohm, 1 x 16 Ohm
• Line out
• Dimensions (W x H x D): 71 x 27 x 29 cm
• Weight: 22 kg
• Made in Germany

Bundle offer comprising

• Guitar Head Amp
• All tube head amp
• Power: 100 W
• 4 Channels with 4 gain controls: Clean Gain 1 - Crunch Gain 2 - Lead Gain 3 - Lead Gain 4
• Two tonally different lead sounds
• 2x Master volume
• Electronic Power Tube Monitoring
• 6L6GC Tubes
• Electronic power amp monitoring
• Adjustable effects loop (parallel - serial), also controllable by foot
• 2 Bottom Sound switches for Lead Channel 3 and Lead Channel 4
• Depth Punch
• Mid Boost switching
• Adjustable Noise Gate in lead mode now also controllable via foot
• Dimensions (L x H x D) 71 x 27 x 27 cm
• Weight: 21 kg
• Made in Germany
• Footswitch optional - 181665 Z9

• Protective Cover Engl Standard Head
• For Engl Fireball 100, Fireball 60, Powerball, Blackmore
• Made of high-quality water resistant nylon
• Manufactured in Germany

• 3 Channels: Clean, Lo Gain & Hi Gain
• Multi-Soak power adjustment with five power options per channel for 3, 7, 20, 50 or 100 Watt Class A/B power
• Power tubes: 4x EL34
• Preamp tubes: 6x 12AX7 & 1x 12AT7
• Bias select switch: EL34, 6V6 or 6L6 tubes
• Controls: Gain, Treble, Mid, Bass, Presence, Reverb & Master Volume
• CabClone Cabinet Simulator
• MIDI In/Thru/Out - 256 Presets - Operates channels 1, 2, 3, Reverb, FX Loop & Solo
• Aluminium housing
• Dimensions: 244 x 578 x 264 mm
• Weight: 20.7 kg
• Includes footswitch
• Made in USA

• Power: 20W
• 2 Channels
• Preamp tubes: 3x ECC83
• Power amp tubes: 2x EL34
• 1 Input
• Controls: Presence, bass, middle, treble, output master, lead master & input gain
• Speaker connectors: 1x 16 Ω, 1x 8 Ω (2x 16 Ω), 1x 4Ω (2x 8 Ω)
• Di-output
• FX loop
• Dimensions: 510 x 232 x 220 mm
• Weight: 10 kg

• 2 Channels
• Power: 40 Watt
• Preamp tubes: 3x 12AX7
• Power amp tubes: 2x EL84
• Very transparent serial effects loop in
• Instrument input: 6.3 mm jack
• Footswitch connection: 6.3 mm jack
• Effect send and return: 2x 6.3 mm jack
• Output for external speakers (4, 8, or 16 Ohm): 6.3 mm jack
• Dimensions (H x L x W): 216 x 457 x 210 mm
• Weight: 9.9 kg
• Made in USA

• 100 W, 2 Channels

Controls:

• Clean gain
• Lead gain
• Bass
• Middle
• Treble
• Lead volume
• Master A
• Master B
• Presence

Switches

• Bright
• Bottom
• Mid boost
• Channel switch
• Adjustable noise gate
• Switchable effects
• Tube Monitor system
• 4 x ECC83
• 4 x 6L6GC
• Dimensions: 71 x 27 x 27 cm
• Weight: 22 kg

Bundle offer comprising

• Guitar amplifier head

• Power: 100 W
• 4 channels with all-tube technology - no semiconductor in signal path
• Preamp tubes: 5 x ECC 83
• Power amp tubes: 4 x EL34
• Individual 3-band EQ as well as gain and volume for each channel
• 12 basic sounds can be chosen directly via foot switch or MIDI
• EL34 power amplifier with presence and resonance control
• 2 switchable and programmable master volume controls
• Programmable parallel FX loop with hardware bypass
• Digital reverb with individual controls for each channel
• Series insert loop with hardware bypass circuit
• Emulated DI out
• MIDI IN and MIDI THRU
• Dimensions:: 740 x 310 x 215 mm
• Weight: 22 kg
• Foot switch included
• Suitable dust cover: Article no. 150488 (not included)
• Suitable case: Article no. 227873 (not included)

• Guitar Speaker Cabinet
• Equipped with: 4 x 12" Celestion G12V Vintage speakers
• Angled design
• Power rating: 280 W
• Impedance: Mono 4/16 Ohm, Stereo 2 x 8 Ohm
• Weight: 40.6 kg
• Dimensions (W x H x D): 755 x 770 x 365
• Includes speaker cable

• The sssnake PPS 1015
• 1.5 m Speaker cable, 2 x 1.5 mm² cross section
• 6.3 mm Jack - 6.3 mm Jack
• Suitable for passive speakers - not for active speakers