Neumann

• 24-Bit 48 kHz signal processing
• Equipped with: 4" woofer 1" tweeter
• Frequency response (+/- 3 dB): 57 Hz - 21 kHz
• Maximum output level: 108.8 dB SPL
• Power: 90 W woofer and 50 W tweeter
• Control panel for standby and acoustical control
• Electronic peak /thermo limiter protection circuit separately for woofer and tweeter
• Input / output level control
• Linear phase DSP crossover 8th order
• External 4-position acoustical controls for low-mid or internal automatic or manual room correction (Precision Alignment) with max. 8 IIR filters plus low / high shelf global filter balance
• 70-ms delay function for time and lipsync settings
• Self-generated noise
• Input: balanced XLR, magnetically shielded
• Network connection
• 2x M6 threaded receivers for stands/mounts
• Dimensions (H x W x D): 233 x 154 x 194 mm
• Weight: 3.5 kg
• Colour: White

• Universally applicable studio microphone
• Pressure gradient receivers can be used for vocals, speakers, overhead and wind instruments
• Switchable polar pattern: omnidirectional, wide cardioid, cardioid, hypercardioid, figure eight
• Switchable 10 dB attenuation
• Two-stage bass roll-off
• Frequency range: 20 - 20,000 Hz
• Nominal impedance: 150 ohms
• Nominal load impedance: 1000 ohms
• Max. sound pressure level for K
• Requires + 48V phantom power
• Dimensions (length x diameter): 185 x 46 mm
• Weight: 400 g

• Neumann TLM 102 Microphone
• 1x Shock mount EA-4

• Pressure gradient transducer
• Directional characteristic: Cardioid
• Frequency range: 20 Hz - 20 kHz
• Peak SPL: 144 dB
• Nominal impedance: 50 Ohm
• Rated load impedance: 1 kOhm
• Equivalent noise level, A-weighted: 12 dBA
• Required 48 V Phantom power
• Weight: approx. 260 g
• Diameter: 52 mm
• Length: 116 mm
• Colour: Black
• Suitable optional case: Art.494135 (not included)

• Neumann (Klein + Hummel)
• With 35 mm high stand sleeve
• For mounting on standard 35 mm diameter high stands
• Mounting of other speakers with appropriate attachments
• For LH 12, LH 15, LH 25, LH 26, LH 31, LH 34, LH 35, LH 36, LH 38, LH 80, CL 80
• Colour: Black

• Large diaphragm microphone based on the K87 capsule
• Cardioid
• Frequency range: 20 Hz - 20 kHz
• Equivalent noise level (A-weighted1) 7 dB-A
• SPL is ideally suited for THD
• Nominal Impedance: 50 Ohm
• Due to the minimal inherent-noise it is ideally suited for: broadcasters, very quiet instruments, radio plays, sound recording / sampling, home recording
• Is great as a spot microphone and for reducing the sound in e.g. wind instruments, strings, percussion, guitar amps, drum overhead positions
• Colour: Nickel
• Dimensions: diameter 60 mm x length 132 mm
• Weight approx. 450 g
• Includes 1x EA1 elastic suspension together with high-quality cardboard packaging - but without a wooden case and rigid support
• Suitable optional case: Art.494135 (not included)

• 2 Independent large diaphragm systems with 5 directional characteristics: Omnidirectional, Wide Cardioid, Cardioid, Hypercardioid, Figure-8
• Upper capsule rotates against the lower capsule over 270°
• Frequency response: 20 - 20,000 Hz
• Max. SPL (sound pressure level) for k
• Extremely low inherent self noise with only 13 dB-A according to DIN/IEC 651
• Transformer-balanced circuit
• Dimensions (diameter x length): 30 + 48 mm x 293 mm
• Weight: 510 g
• Colour: Black

Note: Requires +48 V of phantom power.

The TLM 193 is a large diaphragm microphone for professional recording and live applications. It is the perfect microphone for professional production studios, for musicians and demanding home recording.

The TLM 193 is addressed from the front, marked with the red Neumann logo.

The large diaphragm capsule inside the headgrille has a very smooth frequency response, not only for the sound coming from the front, but also for sound, which laterally falls within an angular range of more than +/- 100 °.

• Polar pattern: Cardioid
• Pressure gradient with dual-diaphragm capsule
• Transformerless circuit
• Extremely low noise: 10 dB (A)
• Quality professional equipment for medium budget
• With swivel mount in a wooden case

• Material: Metal
• Colour: Black RAL 9005
• Dimensions: 256 x 381 x 47.61 mm
• Weight: 890 g
• Includes: 1 Pieces

• Pressure gradient transducer
• Directional characteristic: Cardioid
• Frequency range: 20 Hz - 20 kHz
• Peak SPL: 144 dB
• Nominal impedance: 50 Ohm
• Rated load impedance: 1 kOhm
• Equivalent noise level, A-weighted: 12 dBA
• Required +48 V Phantom power
• Diameter: 52 mm
• Length: 116 mm
• Weight: approx. 260 g
• Colour: Nickel
• Including shock mount EA-4
• Suitable case: Art.494135 (not included)

• Large diaphragm microphone based on U87 capsule
• Cardioid
• Due to the low self-noise ideal for: radio speakers, very quiet instruments, radio play, noise recording / sampling, home recording
• As support microphone suitable for e.g.: wind instruments, strings, percussion, guitar amplifier, drum overhead
• Colour: Black
• Incl. 1x EA1 elastic holder, together in high-quality cardboard packaging - but without a wooden case and without a rigid holder
• Suitable optional case: Art.494135 (not included)

The KMS 105 is developed to optimally transmit the human voice making it the first choice for demanding live applications. Due to the low inherent noise, crosstalk behavior that is free of colouration and the supercardioid characteristics, KMS-105 is ideal for a solo singer on stage. Popping, wind and handling noise are largely avoided through an innovative filter. High acoustic resolution and linear frequency response ensure that KMS-105 provides the musician an optimum control over singing and speaking on stage at any time.

• Condenser microphone
• The Neumann sound for stage
• High transparency in speaking and singing
• Transformerless circuit
• Supercardioid characteristics reduces feedback
• Crosstalk performance free of colouration
• Weight: 350 g
• Length: 180 mm
• Colour: Black
• Incl. microphone clamp

• 2x U87 large diaphragm microphone
• 2x EA87 Ni microphone shock mount
• 1x Aluminium case (suitable for 2 microphones and 2 shock mounts)

The U87 is probably the best-known and most widely used Neumann studio microphone.

It is equipped with a large double diaphragm capsule with the directional characteristics omnidirectional, cardioid and figure-of-eight, which are selected via a switch on the capsule head. A switch on the back causes a 10 dB pre-attenuation. This allows the microphone to transmit sound pressure levels up to 127 dB without distortion. Furthermore, the frequency response in the low pitch ranges can be lowered, in order, for example, to compensate for the proximity effect.

• Directional characteristic: Omnidirectional, cardioid, figure-of-eight
• Frequency range: 20 - 20000 Hz
• Nominal impedance: 200 Ohm
• Weight: 500 g
• Diameter: 56 mm
• Length: 200 mm
• Colour: Nickel

• Suitable for USM 69i and SM 69
• Colour: Black

• For attaching to Omnimount 75 and VESA 75/100 mounting points
• Colour: black

• Characteristics: omnidirectional, cardioid, figure-8
• Switchable 10 dB attenuation
• Universally applicable: Vocal, speaker, overhead, wind
• Including shock mount EA87 and wooden case
• Colour: Black

• Colour: Black

Close range sounds, wind, and fast movements of the microphone boom, all may cause interfering noises. To avoid these unwanted sounds, windscreen accessories are available. Typically, they are made out of open-cell polyurethane foam. These windscreens do not cause interfering resonances and do not influence the directional pattern. Only in the upper frequency range is the output level slightly attenuated.

The wind noise attenuation was measured without electrical filtering in a turbulent air stream traveling at 20 km/h, generated by a noiseless wind machine.

Diameter about 45 mm. Wind noise attenuation 18 dB. Attenuation at 15 kHz 2 dB.

• Acoustic mode of operation: Pressure gradient transducer
• Variable polar pattern: omnidirectional, figure-of-eight, cardioid
• Frequency response: 40 - 16,000 Hz
• Nominal impedance: 200 Ohm
• Nominal load impedance: 1000 Ohm
• Field tranmission factor: 6.5/8/10 mV/Pa ± 1 dB -43.5/-42/-40 dBV
• Replacement noise level, A-weighted: 73/74/75 dB
• Replacement noise level, A-weighted: 21/20/19 dB-A
• Sound pressure level for k
• Microphone dimensions (length x diameter): 163 x 80 mm
• Weight microphone: 800 g
• Dimensions NM V polar pattern control unit (W x H x D): 100 x 120 x 220 mm
• Weight NM V polar pattern control unit: 2.2 kg
• Incl. NM V polar pattern control unit, KC5 cable and MZ 49A oscillating mount

• For TLM170
• Nickel