Preamps

The preamplifier has a DI input, a microphone input and a line input. The maximum input gain is 65 dB, and can be adjusted with a rotary switch in 5 dB increments. The output level can be varied with a potentiometer, ensuring a clean sound enriched with harmonic distortions. Signals processed in this way are placed firmly into the mix.

The 4 band equalizer is based on a Pultec-like passive coil-based design with one high and one low band each, as well as 2 mid bands. The first of these mid-bands is responsible for the frequency boost, the second for the frequency cut.

The treble band of 6.8 / 8.1 / 12 and 16 kHz with a maximum boost of +18 dB. The mid-range boost band: 1.2 / 1.8 / 2.2 / 3.9 and 5.8, also with a maximum boost of +18 dB. The quality is switchable, and is lowered as the boost is increased.

The mid band for the cut is quite narrow, with centre frequencies at 300 / 400 / 500 / 600 / 700 and 850 Hz.

The bass band is switchable between frequencies of 100 and 200 Hz, and 50 / 70 / 100 and 200 Hz at the peak. The quality at peak is lowered as the boost is raised.

The high pass filter can be switched between the 5 frequencies 30 / 60 / 90 / 150 and 300 Hz.

Due to the passive filter technology of this equalizer the highs are very silky, the basses are deep and solid. Similarities with the Pultec EQP-1a3 and the Lang PEQ-2 are purely coincidental! A wonderful device with a lot of character!

• Combination of the TG2 preamplifier with a passive 4 band equalizer
• Pultec-like passive coil-based design with one altimeter and one bass band each, as well as 2 centre bands
• Power supply required: Article number 185072

• 48V Phantom power
• LED VU Meters
• SPDIF I/O
• Built-in headphone amplifier
• With USB interface 24-Bit / 192 kHz
• For MAC and WinXP
• ASIO
• Stand alone operation with power supply via USB possible

• 192 kHz
• 8x Balanced XLR mic / line inputs with Hi-Z option and 85 dB gain range
• 8x Balanced XLR line outputs
• 4x AES / EBU Out via D-Sub, 8 channels @ 192 kHz
• 2x ADAT Out, 8 channels @ 96 kHz
• Optional MADI I / O (I64 MADI Card)
• LED level display with 13 LEDs per channel
• M / S decoding / encoding at the digital output
• Current device status can be stored in 8 memory locations
• Fully remote controlled

• XLR Microphone input
• Hi-Z Instrument input on the front side
• Balanced XLR outputs
• TRS Insert to the output amplifier
• Adjustable gain in 5 dB steps up to 60 dB
• 1/4" - 10 dBV output for latency monitoring
• Phantom power
• Design: 19" / 1 U

• Usable as a standalone or rack mount for Neve racks/ series 80
• Class A Design microphone preamp
• 3-Band EQ (fixed HF plus two switchable filters with cut/ boost) and high pass filter
• Mic and line input
• Including power adapter

• 8-Channel transformer-coupled Class-A microphone preamplifier and AD/DA converter 24 bit / 192 kHz
• 3-Stage Class-A preamps in 73 style
• Carnhill transformer
• +48 V phantom power switchable per channel
• Low cut and phase reverse switchable per channel
• HP filter for channel 1 and 2: 20 - 250 Hz
• Construction: 19" / 3 U
• Dimensions (W x H x D): 482 x 88 x 280 mm
• Weight: 9.45 kg
• Incl. external power supply unit

Connections:

• 8 Microphone inputs: XLR
• 8 Line inputs: Sub-D25
• 2 HI-Z instrument inputs: 6.3 mm jack
• 8 Line outputs: XLR
• 8 Line outputs: SubD-25
• 8 ADC return: SubD-25
• 2 ADAT outputs (SMUX)
• AES/EBU / S/PDIF: Coax 9-pin
• Word clock input and output: BNC

• Up to 25 dB gain
• 48 V phantom power
• XLR input / output
• Frequency range: 10 - 20,000 Hz (± 1 dB)
• Dimensions: 38 x 39 x 85 mm
• Weight: 0.25kg

• Extremely low-noise Class A JFet amplifier
• For dynamic and ribbon microphones
• 2 Matched JFet transistor pairs
• Input: Balanced 3-pin XLR female
• Output: Balanced 3-pol. XLR male
• Input impedance: 20 kOhm
• Gain: 28 dB (@ 3 kOhm source impedance)
• Frequency response: 10 - 50,000 Hz (+/- 1 dB)
• Requires phantom power: 24 - 48 V.
• Dimensions (L x W): 77 x 22 mm
• Weight: 35 g
• Developed and produced in Germany

Note: Does not allow phantom power to pass through to the microphone

• Hand-selected 12AX7 tube
• An integrated limiter
• 20 dB Pad
• Phase inverter switch
• +48 V Phantom power
• Gain and output volume controls
• LED meter
• Microphone input: XLR
• Instrument input: 6.3 mm jack balanced
• Line output: XLR and 6.3 mm jack balanced
• Incl. a power supply unit

• Classic 312A preamp design with 70 dB gain
• All-rounder for detailed recordings, e.g. Vocals, drums, guitar etc.
• Very low-noise signal path
• Cinemag transformers in the inputs and outputs
• Channels 1 and 2 with additional DI input
• Switchable 48 V phantom power, phase reversal and 18 dB pad (mic-in) per channel
• Max. Input level Mic In: +1 dBu / DI In: +18 dBu
• Frequency range: 10 Hz - 30000 Hz
• Gain Mic In: 26 to 70 dB / DI In: +10 to 53 dB
• THD + N Mic In: 0.01% / DI In: 0.115% (+36 dB gain, +4 dBu output)
• Equivalent input noise Mic In: -120 dBu / DI In: -94 dBu
• Input impedance Mic In: 200 Ohm / DI In: 1.1 MOhm (unbalanced)
• Max. Output level: +26 dBu
• Output impedance: 600 ohms
• 4 Inputs: XLR (balanced)
• 2 Inputs: jack (unbalanced)
• 4 Inputs: XLR and jack (balanced)
• External power supply
• Height: 1 U
• Width: 19"
• Depth: 178 mm
• Weight: 4.5 kg

• 2x XLR micro input
• 2x Hi-Z instrument input on the front
• Balanced XLR outputs
• TRS insert after the output amplifier
• Adjustable gain in 5 dB increments up to 60 dB
• 1/4 "-10 dBV output for latency-free monitoring
• Phantom power
• Format: 19 "/ 1 U

• Preamplifier developed for sound colouration and enhancement of line signals (e.g. keyboards, synthesizers, drum computers), individual tracks, instrument groups or a stereo sum
• Class-A tube circuit with EF86 tube
• Selectable tube mode (triode/pentode)
• Input and output transformers per channel
• Bass and treble boost (each with two selectable frequencies)
• Switchable -6dB attenuator
• Adjustable output level
• Frequency response: 10 - 50,000 Hz (+/- 3 dB)
• Maximum output level: +32 dBu
• 2 Switchable line inputs (XLR) and line output (XLR) per channel
• Ground lift switch
• Format: 19" / 1 U
• Weight: 6.34 kg

• Phantom power: +48 V
• Switchable -20 dB pad
• Phase reversal
• High-pass filter (12 dB / octave, 40 to 200 Hz)
• Air-band shelf equaliser (2.5, 5, 10, 15, 20 and 40 kHz) with gain boost of up to +9 dB
• Equaliser (10 Hz, 40 Hz, 65 Hz, 100 Hz, 125 Hz and 165 Hz) for boosts up to 9 dB
• 2 Microphone inputs: XLR
• 2 Instrument inputs: 6.3 mm jack
• 2 Instrument Pass Thru inputs: 6.3 mm jack
• 2 Line inputs: XLR
• 2 Line outputs: XLR
• Model: 19" / 1U

• +26 dB For dynamic or ribbon microphones
• Frequency range: 10 - 20,000 Hz (-1 dB)
• Gain: +26 dB (load > 1 kOhm)
• Max. output level (0.5% THD): 8.3 dBV (2.6 V)
• Power supply: 48 V phantom power
• Impedance: 1 kOhm
• Connectors: 2 x XLR male/female (3-pole)
• Dimensions (L x W x H): 111 x 53 x 48 mm
• Weight: 410 g

• Analogue microphone preamplifier
• Stereo
• Based on the well-known Class A preamp design with 3 band EQ: +/- 16 db
• High shelving 12 Khz, +/- 18 db mid with 6 switchable frequencies and fixed Q, +/- 16 db low shelving with 4 corner frequencies
• Exclusive Neve Marinair transformer for input/output
• Switchable insert path
• Design: 19"/ 2 U

• With insert points and A/D converter
• 2 Hi-Z Class-A instrument inputs for guitar/bass
• 8 Inserts
• Burr Brown based AD converter technology
• Converter dynamic range: 113 dB unweighted
• High pass filter and input impedance variable
• Fanless power supply
• Design: 19" / 1 U
• Includes licence for comprehensive Audient ARC download software package (licence after product registration); the download package includes products from the following companies: Eventide, Steinberg, LANDR and Producertech - Audient is responsible for the validity and scope of delivery of the software package

• Classic 1073 preamplifier design
• Half rack housing
• Input and output transformer from Cinemag
• Hi-Z input on the front side
• Phase reversal and 18 dB pad switch
• Stepped gain control
• Up to 70 dB gain
• Switchable 48 V phantom power
• Variable output control
• Inputs: 1x XLR (balanced), 1x jack (unbalanced)
• Output: 1x Jack (balanced)
• External power supply
• Height: 1 U
• Width: 9.5" (rack mount possible)
• Weight: 1.4 kg

• 5 Switchable EQ bands
• Selectable HP and LP filters (18dB per octave)
• Separate 48V phantom powering
• Phase flip: 180°
• Solo button selects channel unbalanced output
• Microphone input: input impedance 300 or 1200 Ohms, gain +20dB to +80dB in 5dB steps
• Line input: input impedance 10 kOhm, gain -15dB to +20dB in 5dB steps
• Frequency response: 20Hz to 20kHz, -3dB @ 7Hz and 35kHz
• Dimensions: 278 x 274 x 45 mm
• Weight: 2.9 kg

Note: requires an optional AMS Neve 1081 3U Horizontal Rack (article no. 539570, not included in the delivery)

• 70 dB Gain
• FET Limiter
• Selectable input impedance
• LED Metering
• +48V phantom power
• XLR and jack inputs and outputs
• Switchable phase invert
• Switchable low cut filter
• Variable input and output controllers
• Dimensions: 44.5 x 150 x 165 mm
• Weight: 1.14 kg
• Incl. Power supply 9VAC/1A

Small plug with 2.1 mm bore