Controller Modules

• 4 CV inputs
• CV input 4 with attenuator
• 4 Switches to switch and sum CV signals
• 3 CV outputs with identical signal
• Width: 8 HP
• Current consumption: 5 mA (+12 V) / 5 mA (-12 V)

• Vintage Edition with black front panel
• Joystick with X-/Y-axis
• Rotation function (Z-axis) and gate button
• X-, Y- and Z-axis self-resetting via spring mechanism
• CV outputs for X-, Y- and Z-axis in non-inverted and inverted form (range: -5 V to +5 V)
• CV offset controller per axis
• 4 Quadrant CV outputs (Q1-Q4) with adjustable overlap (range: 0 V to +10 V)
• Gate output
• Current requirement: 50 mA (+12 V) / 20 mA (-12 V)
• Width: 12 HP
• Depth: 50 mm
• Joystick height: 70 mm

• Simulates the behaviour of a marble on a plate to generate control voltages
• The virtual marble can be influenced via 5 parameters: Movement on X- and Y-axis, rolling speed, rebound behaviour at the virtual surface boundaries (elasticity), bumping of the marble with adjustable intensity
• CV inputs for all parameters
• CV outputs for X, Y, velocity and bounce
• Current consumption: 80 mA (+12 V) / 40 mA (-12 V)
• Width: 10 HP
• Depth: 52 mm

• 32 Chromatic touchplates generate gate
• 10 ms trigger
• Grade CV (1 V / Oct)
• 2 Bender touch plates with separate output
• 8 Additional touch plates with adjustable output voltage
• Pressure CV and gate
• Optionally with 9-15 VDC power supply for operation
• Width: 84 HP / HP
• Depth: 27 mm
• Power requirement: +120 mA (+12 V) / -0 mA (-12 V)

• Joystick with 8 CV outputs - 4 channels, each with output for X and Y axis
• 2 Gate outputs
• Per channel joystick recorder with up to 8 sec. recording time
• LFO and drone oscillator modes
• Voltage range of CV outputs: -5V to +5V
• LFO frequency range: 0.1 - 10Hz
• Drone oscillator frequency range: 50 - 1000 Hz
• Current consumption: 71mA (+12V) / 20mA (-12V)
• Width: 12 HP
• Depth: 30 mm

• Input / output for X and Y axis with range and offset control
• Each axis can work as a bipolar attenuator or DC source
• 2 Gate outputs with trigger button
• Power requirement: 25 mA (+12 V) / 10 mA (-12 V)
• Width: 12 HP
• Depth: 35 mm

• Joystick CV controller
• Unipolar and bipolar X / Y outputs
• 4 Quadrant outputs A-D (0 V - 10 V)
• 4 Inputs for audio and control signals for use as a vector mixer, quadraphonic pan controller or crossfader
• Generation of gate signals by push button or joystick movements
• CV Recorder: Joystick gestures can be recorded for up to 30 seconds
• Playback of joystick movements as Loop and One Shot, synchronized to external triggers
• Power requirement: 85 mA (+12 V) / 32 mA (-12 V)
• Width: 14 TE
• Depth: 40 mm

• Produces variable control voltage when hand is moved around the antenna
• Range approx. 30 cm
• Maximum output voltage: 10V
• Euro rack format
• Power requirements: 60 MA (+12 V) / 20 mA -12 V)
• Width: 8 HP / 40.3 mm
• Depth: 40 mm (measured from the rear of the front panel)

• Auxiliary module that mixes 4 CV inputs to 3 parallel outputs
• Inputs 1-3 with unity gain
• Input 4 with bi-polar attenuator
• Each input can be activated via switch
• Current consumption: 10 mA (+12V) / 10 mA (-12V)
• Width: 8 HP
• Depth: 35 mm

Doepfer A-179-2; Eurorack module; Light Controlled Voltage Source; build-in light sensor and input for external sensor; adjustable CV offset and sensitivity; adjustable gate threshold; positive and negative CV output; gate output; power consumption: 10mA (+12V) / 10mA (-12V); width: 4 HP; depth: 30mm