Mixer Attenuator Modules

• Sums up all connected input modules (article nr 399259 - not included) to a stereo sum
• AUX send and AUX return
• Width: 4 HP
• Depth: 40 mm
• Power requirements: +20 mA (+12 V) / -20 mA (-12 V)

• 4x Input to 1x Output
• 1x Input to 4 x Output
• Power consumption: +25 mA, -25 mA
• Dimensions (W x D): 4 HP / 25 mm

• Vintage Edition with a black front panel
• Compact 4-channel mixer
• Suitable for CV and audio signals
• Volume control available per each channel
• 4 x Input
• 2 x Mix output
• Current consumption: 10 mA (+12 V) / 10 mA (-12 V)
• Width: 4 TE
• Depth: 30 mm

• Triple mixer for trigger and gate signals
• Divided into three independent areas
• Up to four signals can be processed in each area (4: 1 combiner or gate)
• Area coupling by switch
• Simple CV summation
• Power consumption: 10 mA
• Dimensions: 6 HP / HP x 25 mm (WxD)

• User-friendly layout
• Separate ADSR, function generator, LFO and mixer sections
• Fully analogue 4-stage ADSR circuit with independent controls for attack, decay, sustain and release
• Developed by Pittsburgh Modular Synthesizer
• Loop function for envelope cycling
• Dual LFO with triangle and square LFO out
• 3 Channel mixer
• Power consumption: 130mA (+12V) / 70mA (-12V)
• Width: 16 TE
• Depth: 30 mm

• 3 Separate attenuators
• Each with input and output
• Suitable for CV and audio signals
• Width: 8 HP

• 4-Channel stereo mixer with balanced outputs
• Channels 1 and 2: mono input, signal LED, panorama and level control
• Channel 3 and 4: stereo input, signal LED and level control
• Stereo headphone output with level control
• Stereo sum output with level control
• 2x 6.3 mm jack outputs
• Switchable between "stereo, balanced" and "2x stereo, unbalanced
• Connection to other 4ms Listen modules or WAV recorders possible via jumper cable
• Current consumption: 107 mA (+12 V) / 101 mA (-12 V)
• Width: 12 HP
• Depth: 28.7 mm

• 4-Channel VCA with decay envelopes
• Designed for percussion sounds
• 4 Channels, each with VCA, decay envelope and volume control
• Per channel: Audio input, trigger input, decay CV input, envelope output
• Audio output per channel (can also be used as 4-channel mixer)
• Current consumption: 80 mA (+12 V) / 60 mA (-12 V)
• Width: 12 HP
• Depth: 25 mm

• VC Stereo mixer
• Mixer with 4 stereo inputs and 2 VCAs per channel
• Level control and CV attenuation per chanel
• Suitable for audio signals and voltage control
• Stereo master output
• Current draw: 40 mA (+12 V) / 40 mA (-12 V)
• Width: 8 HP
• Depth: 45 mm

• Simple amplifier
• Is suitable for control voltages and audio signals via DC coupling
• Selectable maximum amplification: 1, 2 or 4 (switchable)
• Level controls
• 2 Peak LEDs
• Eurorack format
• Width: 4 HP
• Depth: 20 mm
• Power requirements: +20 mA (+ 12V) / -10 mA (-12V)

• Inputs 1 and 2 are single-channel mono inputs, each with its own mute switch and level control
• Input 3 is a two-channel stereo input with a common mute and level control
• Input 4 is an additional, non-modifiable stereo input
• Several modules can be connected with bus cables on the back
• Width: 6 HP
• Depth: 29 mm
• Power requirement: +15 mA (+12 V) / -16 mA (-12 V)

• 4-Channel stereo mixer with headphone output
• Channels 1 and 2: mono input, signal LED, panorama and level control
• Channels 3 and 4: stereo input, signal LED and level control
• Stereo headphone output with level control
• Stereo sum output with level control and switch for Eurorack or line level
• Connection to other 4ms Listen modules or WAV recorders possible via jumper cable
• Current consumption: 70 mA (+12 V) / 62 mA (-12 V)
• Width: 10 TE
• Depth: 25 mm

• Analogue mixer, polariser, and panner
• Developed for audio signals
• Control voltages and feedback patching
• 3 Signal inputs - 2x with bipolar attenuator, 1x unity gain
• Panner/polariser section with control and CV input with bipolar attenuator
• Output for polariser, left signal, and right signal
• Current draw: 50 mA (+12 V) / 40 mA (-12 V)
• Width: 8 HP
• Depth: 24 mm

• With 4 rows and 4 columns
• Unipolar / Bipolar mode switchable on each column
• Suitable for both control voltage and audio
• Width: 20 HP
• Depth: 20 mm
• Power requirements: +30 mA (+12 V) / -30 mA (-12 V)

Endorphin.es Cockpit 1U Silver; compact performance mixer; 4 stereo channels, each with level encoder, mute function and signal LED; build-in compressor with ducking function and sidechain input, combined line/headphones output (3.5mm TRS stereo jack); compatible with Intellijel Audio Jacks V2 Boards and cases; power consumption: 40mA (+12V) / 25mA (-12V); width: 24 HP; depth: 42mm

• Inverting/interrupting mixer
• 4-Channel mixer with level control 3-way switch per channel (inverted, mute, non-inverted)
• Channel 1 can generate an offset voltage of +/-5V
• Individual outputs for all channels for use as a 4-channel attenuator
• Two parallel mix outputs
• Power consumption: 20mA (+12V) / 20mA (-12V)
• Width: 6 U
• Depth: 40 mm

• 3-Channel mixer, attenuator, attenuvertor, inverter, multiplier, adder and DC voltage source
• When the input jack is empty, each channel provides 0 V to +5 V or -5 V to +5 V as the voltage source
• Channels A and B can generate 0 V to +10 V or -10 V to +10 V
• Switch for voltage doubling on channel A
• Switch for +5 V offset on channel B
• Mute switch for channel C
• Mix-Out
• Power requirements: 49 mA (+12 V) / 25 mA (-12 V)
• Width: 6 HP
• Depth: 21 mm

• Smooth-running Innofader crossfader
• Three selectable crossfader characteristics (DJ cut, constant power, linear)
• Two CV outputs (A & B)
• Switchable from unipolar (0V to +5V) and bipolar (-5V to +5V)
• Stereo and mono operation possible
• Suitable for audio signals and control voltage
• Stereo inputs for A & B and stereo mix output
• Power consumption: 48mA (+12V) / 41mA (-12V)
• Width: 26 U
• Depth: 38 mm