Oscillator Modules

• Discrete VCO with waveshaper
• Triangle and square wave output
• Three outputs with waveshaper that fade from sine to sawtooth and square to spike
• New richness parameter for multiplying sawtooth, pulse and square waveforms
• Timbre control for controlling harmonic overtones
• CV inputs with bipolar attenuators for FM, richness and timbre
• Current consumption: 70mA (+12V) / 62mA (-12V)
• Width: 12 HP
• Depth: 27 mm

• Analogue VCO / LFO
• Octave selector and fine-tune control
• Outputs for sine, triangle, sawtooth and square/pulse
• Hard- and soft-sync selector switch
• 2 FM inputs (AC and DC coupled)
• Link inputs for pitch and pulse width (for control by 921A module)
• Current consumption: 45 mA (+12 V) / 45 mA (-12 V)
• Width: 8 HP
• Depth: 40 mm

Befaco Pony VCO; Eurorack module; compact analog Thru-Zero VCO with build-in Wavefolder and VCA; manual control for VCO frequency with range switch (Full, Octave, Semitone, LFO); octave selector; Timbre control for wavefolder intensity; four selectable waveforms: sine, triangle, sawtooth and square wave; CV inputs for pitch (1V/oct.), FM, Timbre and VCA; Sync input; VCO output; power consumption: 32mA (+12V) / 25mA (-12V); width: 4 HP; depth: 30mm

• Analogue VCO with triangle and sawtooth core
• Controls for coarse and fine tuning
• Switchable LFO mode (frequency range: 0.06Hz - 16Hz)
• Adjustable pulse width
• CV input with attenuator for pulse width modulation: two CV inputs with attenuators for frequency modulation
• The 5 waveforms sine, triangle, square, sawtooth and pulse can each be muted, mixed or inverted via kip switches
• 1V/oct. input
• Two signal outputs
• Current consumption: 60mA (+12V) / 50mA (-12V)
• Width: 16 HP
• Depth: 46 mm

• Analogue VCO with tube saturation
• Based on newly developed AS3340 chip
• Waveforms: Triangle, sawtooth and rectangle with adjustable pulse width
• Stable tracking over 8 octaves
• Two integrated BBD strands for detuning effects
• Mixable sub-oscillator
• Adjustable tube saturation with input for external signals
• Inputs for FM and Sync
• Outputs for Triangle, Rectangle, Sub-Oscillator and Mix
• Power requirement: 228 mA (+12 V) / 55 mA (-12 V)
• Width: 14 HP
• Depth: 42 mm

• Quadrature sine oscillator with filter and waveshaper
• SPIN section: Quadrature sine wave oscillator with 4 outputs (0°, 90°, 180°, 270°) and tracking over 4 octaves
• GRIND section: Compares the SPIN outputs with an input signal and derives square wave signals which are fed into a VCA and modulated by the 4 GRIND CV inputs and GRIND fader
• Depending on the setting, the module functions as an oscillator or state variable filter
• Controls for coarse and fine tuning, attenuation, GRIND/SPIN ratio
• FM input with attenuator (linear or exponential)
• GRIND input with attenuator
• 4 SPIN outputs provide phase-shifted sinusoidal signals or in filter mode low-pass, band-pass, high-pass and notch characteristics
• Current consumption: 81 mA (+12 V) / 78 mA (-12 V)
• Width: 18 TE
• Depth: 25 mm

• Dual VCO
• Dual oscillator, as inspired by the Buchla Modular Synthesizer
• Analog signal path
• Fastened on potentiometers
• Sine, saw tooth and square inputs and outputs as well as noise output
• CV inputs
• Soft- and hard sync inputs
• Dimensions: 30 HP width, up to 26 mm depth

• Analogue VCO
• Outputs for sine, triangle, sawtooth (rising and falling), square (with adjustable pulse width)
• Square wave sub-oscillator with switchable phase position
• Frequency range: 10 - 13,0000 Hz
• Switchable LFO mode: 0.5 - 6000 Hz
• CV inputs for linear and exponential FM, each with attenuators
• CV input for pulse width modulation
• Oscillator sync input
• Buffered thru outputs for pitch CV and sync gate
• Current consumption: 60mA (+12V) / 60mA (-12V)
• Width: 12 HP

• Replica of the discretely built legendary model D oscillator of the first series
• Sound stable circuit
• Waveforms: Sharktooth, sawtooth, rectangle, triangle each with its own output
• Exponential and linear modulation
• Pulse width modulation
• Oscillator Sync
• Width: 14 HP
• Depth: 38 mm
• Power requirements: +55 mA (+12 V) / -40 mA (-12 V)

• Multi-Engine Oscillator
• 20 Synthesis algorithms with 3 editable parameters each
• An integrated OLED oscilloscope
• A USB-B port for firmware updates
• CV inputs for selecting: algorithms, pitch, level and trigger
• CV inputs with bipolar attenuators for FM, morph and timbre
• 2 Audio outputs
• Current consumption: 130 mA (+12 V) / 10 mA (-12 V)
• Width: 16 TE
• Depth: 45 mm

Algorithms:

• Virtual Analogue
• Waveshaping
• FM 2 operators
• Grains
• Additive
• Chords
• Speech
• Karplus Strong
• Super Saw
• Wavetable Oscillator
• Rain
• Noise
• Dust
• Modal Strings
• FM Drum
• Bass Drum
• Snare Drum
• Hi-Hat
• Cowbell
• Toms

• Standard VCO for the A-100 modular system
• Black front panel
• Width: 10 HP / 50.5 mm
• Depth: 55 mm (measured from the rear of the front panel)
• Power requirements: +90 mA (+ 12V) / -20 mA (-12V)

• An analogue VCO including waveshaper
• Waveforms: Sine, triangle, sawtooth and square waveforms
• Wave folder / waveshaper patchable to any waveform or external source
• Drive circuit
• Linear and exponential frequency modulation (FM)
• Drive and fold CV input
• Hard sync input
• Pulse width modulation
• Developed in collaboration with Pittsburgh Modular Synthesizers
• Power requirements: +12V (120mA) / -12Volt (108mA)
• Width: 14TE
• Depth: 26 mm

• Stereo Prismatic Oscillator
• Controls for coarse and fine tuning
• Left and right signal components can be modulated separately, each with CV input and bipolar attenuator
• FM bus with signal input, attenuator and CV input
• Exponential FM input with bipolar attenuator
• Centre control with CV input for animation of stereo vari timbre and stereo wavefolding outputs
• 2 Pitch inputs (1V/oct.)
• Mono outputs for sine, triangle, sawtooth, spike and suboctave
• 3 Outputs for stereo pulse width modulation, stereo vari-timbre and stereo wavefolding
• Hard sync input
• Power consumption: 140mA (+12V) / 132mA (-12V)
• Width: 18 U

Erica Synths Pico VCO2; Eurorack module; compact analog VCO; solid tracking over 8 octaves; controls for Tune and pulsewidth; inputs for pitch CV (1V/Oct.) and PWM; outputs for pulse and triangle wave; power consumption: 21mA (+12V) / 19mA (-12V); width: 3 HP; depth: 35 mm

• High End VCO II / VCLFO
• Precise tracking over 10 octaves
• Wide frequency range: 0.5 Hz - 20 kHz in VCO mode, 0.001 Hz - 40 Hz in LFO mode
• Selector switch for LFO or VCO mode
• CV inputs with attenuators for exponential and linear FM and PWM
• Adjustable pulse width
• Inputs for soft and hard sync
• Outputs for sawtooth, square/pulse, triangle and sine wave
• Power requirement: 70mA (+12V) / 50mA (-12V)
• Width: 14 TE
• Depth: 55 mm

• Trapezoid Thru Zero Quadrature VCO
• Uses quadrature trapezoid as the fundamental waveform
• Features linear Thru Zero frequency modulation and quadrature outputs for all waveforms (two 90 degree out of phase signals each)
• Linear and exponential control unit
• Width: 12 HP
• Depth: 55 mm
• Power requirements: +80 mA (+12 V) / -70 mA (-12 V)
• Design: Eurorack module

• Pitch control (range: 3 octaves) and octave switch (+2 or -2 octaves)
• Switchable LFO mode
• Pitch CV input (1 V/oct.)
• Hard Sync input
• Outputs for sine, triangle, sawtooth and rectangle
• Current consumption: 19 mA (+12 V) / 16 mA (-12 V)
• Width: 14 TE
• Depth: 38 mm