Digital Converters

• Audiophile conversion
• 5 Digital input formats: USB, AES, S/PDIF, ADAT, Optical S/PDIF (Toslink)
• Sampling frequencies from 44.1 to 192 kHz with automatic detection
• High definition stereo reference monitoring
• Extremely low-jitter clock
• USB input for direct DAW connection
• USB uplink: Switched to USB, the otherwise unused USB input is fed from the AES-2 input
• Compatible with Monitor ST/SR for remote controlled switching
• Precise level display (peak meter) as used in the Dangerous Master
• Loop through of digital input for external level display

Specifications:

• Signal-to-noise ratio A-weighted (20 - 20k Hz):
• Signal-to-noise ratio unweighted (20 - 20k Hz):
• Dynamic range A-weighted (20 - 20k Hz):
• Dynamic range unweighted (20 - 20k Hz):
• Total harmonic distortion (1 kHz unweighted, 20 - 20k Hz, +4 dBu out):
• Total harmonic distortion (1 kHz unweighted, 20 - 20k Hz, + 22 dBu out):
• Frequency response (96 kHz sample rate):
• DC to 20 kHz: +0 / -0.25 dB
• DC to 30 kHz: +0 / -0.5 dB
• DC to 40 kHz: +0 / -1.0 dB
• Jitter: 16ps (100Hz to 40kHz), 18ps (100Hz to 1MHz)
• Crosstalk rejection (at 1 kHz):> 114 dBu
• Design: 19"/1U

• With ESS Technologies ES9028PRO converter chip
• 24-Bit/192 kHz
• Isolated inputs via UltraLock3 jitter attenuation system
• Digital Pass Through
• Direct DSD D/A converter
• Bi-Directional 12 V trigger
• High-Headroom DSP
• 2x S/PDIF coaxial digital inputs,
• 2x S/PDIF optical digital inputs
• 2 Line outputs: XLR balanced and RCA (L/R) unbalanced
• 12 V Trigger input/output, 3.5 mm mini jack
• USB
• Design: 9.5" (1.2" rack), 1 U
• Dimensions (W x H x D): 249 x 44.5 x 216 mm
• Weight: 1.36 kg

• Up to 128 channels in/out at 48 kHz
• Up to 64 channels in/out at 96 kHz
• 0.8 MS Latency
• Powered by all current recording software
• Word clock, sync
• 1 SoundGrid RJ45 Ethernet port
• 2x Madi In/Out (optional)
• For interfacing Waves Soundgrid or Record/Virtual Soundcheck

• Sample frequency switchable in 6 steps
• For universal compatibility with other devices
• Calibration level in 3 steps switchable for compatibility with other devices
• Two selectable discrete stereo input paths
• Clip Guard" prevents the red LEDs on the target (such as the DAW) from coming on
• Custom-made digital display with normal and peak hold mode for precise optical feedback
• "Zoom View" For a more accurate, enlarged resolution, only the upper 10dB of the signal level is displayed
• Word Clock with three modes: Internal, External and Master
• X Shaper
• EMPHASIS Shelving EQ / Compressor
• USB port for Mac / PC
• Frequency Response (@ 96kHz): 20Hz to 20kHz (+0 / -0.035dB)
• IMD (SMPTE): IMD 60Hz / 7kHz +4 dBu in:
• Jitter: 16ps (100Hz to 40KHz), 18ps (100Hz to 1MHz)
• Crosstalk attenuation: 118dBu from 15 Hz to 40kHz (+/- 0.04 dB)
• 3-Pin IEC Auto Switching Power Supply, 120V (US) / 240V (Europe)
• Dimensions: 19" 1U

Inputs / outputs:

• 2 Switchable stereo input channels
• 2 AES outputs
• ADAT Optical output
• SPDIF Optical output
• SPDIF COAX output

• 24 Bit / 96 kHz converter
• Jack sockets for quick and easy wiring
• All I/Os (32 analog channels) can be used at 96 kHz
• Input gain of all analog channels switchable in 1 dB increments (-8dBu to +20dBu)
• Output level of all analog channels switchable in 1 dB increments (-8dBu to +20dBu)
• Active jitter reduction circuit
• Fanless
• 16 analog inputs and outputs (32 x sym. 6.3 mm TRS)
• 4 ADAT inputs and outputs
• 1 MIDI input and output
• 1 word clock input and output
• 1 headphone output
• 2 TFT displays for levels and settings, for a complete overview of all levels and settings on the device
• 1 power supply connection A/B 12 V DC/3A
• Format: 19" / 1 U

• For AES3, AES3id and S / P DIF signals
• AES / EBU, AES / EBUid and S / P DIF interfaces
• Format and sample rate conversions of 32.0-192.0 kHz for all formats
• Separate AES11 reference clock input
• Independently and bidirectionally converts different clock rates: X-SRC
• 4-channel sampling rate converter (SRC) section for bidirectional conversions
• Internal flash memory
• Design: 9.5 "housing
• With built-in power supply

RME ADI-2/4 Pro SE; high-end AD/DA converter & headphone amplifier; SteadyClock FS; display; incl. external power supply; connections: 2x line input XLR / 6.3 mm jack combo, 2x line output XLR, 2x line output 6.3 mm jack, 2x stereo headphone output 6.3 mm jack, 1x headphone output 4.4 mm Pentaconn balanced, 1x trigger output, ADAT / S/PDIF / AES, USB 2.0; chassis: desktop

• 24 bit / 96 kHz converter
• Installation height: 1U
• Analog connections: each 2x XLR in/out and RCA for input/output
• Adjustable output level: 12 dBu, 18 dBu or 24dBu
• Dynamic range over 110 dB
• Digital connections per AES/EBU XLR and S/PDIF coax for input/output
• Dimensions 48 cm (W) x 10.8 cm (D) x 4.2 cm (H)
• Weight 1.6 kg

• Converts S/PDIF to analog
• 24-Bit, 192 kHz
• Inputs: 1 x S/PDIF coaxial, 1 x S/PDIF optical
• Switchable during operation (only 1 active input)
• Output: 1 x Stereo RCA
• Dimensions (W x D x H): 95 x 70 x 25 mm
• Includes power supply

• High-end conversion in 24-bit / 384 kHz for recording and playback
• 2 Headphone outputs (XLR / TRS combo jack) with separate volume control and adjustable output impedance from -4.6 to 85.3 ohms
• Supported playback formats: DSD64, DSD128 and DSD256 (DoP)
• A / D dynamic range: 128 dB (dual AK5578 ADC chips)
• D / A dynamic range: 138 dB (8x CS43198 DAC chips)
• Operation via touchscreen display
• Sync inputs for 10M Atomic Clock and Word Clock
• 2 Analogue inputs: XLR / TRS combo jack, RCA
• 2 Analogue outputs: XLR, TRS
• Stereo Digital Input / Output: AES / EBU, Toslink, S / PDIF
• USB 3.1 port (Gen 1)
• Software compatible with Windows 10 and Mac OS X 10.11
• Dimensions: 310 x 253 x 91 mm
• Weight: 3.0 kg
• Includes external power supply and USB cable

• Enables the transmission of audio signals over an Ethernet network
• 24 bit / 96 kHz converter
• Overload indicators and signal indicators for the analog input signals
• Sorable up to 50 presets
• Two different programs available for control (for Windows, Mac, iOS, and Android devices): MX Connect for system installer, EZ Connect for end users
• Supports AES67
• Powerful DSP mixer with 4-band EQ at the input range
• Phantom power +48 V
• 4 Balanced XLR microphone / line inputs
• 2 Gigabit Ethernet 1000BASE-T RJ45 connectors
• Power supply via PoE or external power supply PS-P1220E (power supply not included)
• Dimensions (W x H x D): 214 x 45 x 136 mm
• Weight: 885 g
• Includes mounting bracket for mounting under a table top

• 24 bits / 192 kHz
• Hybrid gain control
• High-headroom DSP
• UltraLock2 jitter
• Sample rate and word length display
• Dim function
• Bi-directional 12V trigger
• Remote control
• Type: 9.5" (1/2" rack) 1U
• Dimensions (W x H x D): 249 x 44.5 x 216 mm
• Colour: Black

Connections:

• 2 S / PDIF coaxial digital inputs
• 2 S / PDIF optical digital inputs
• 2 Stereo analog inputs (L / R)
• 2 Stereo analog outputs RCA (L / R)
• 1 Stereo analog output XLR balanced
• USB port

• Bi-directional
• Up to 24 bit / 192 kHz
• Level control for input and output channels
• Power supply and Ethernet in redundant design with automatic switchover in the event of faults
• EtherCON network connections with locking
• 2 Combined 8-channel AES59 inputs and outputs with DB25 connections
• Rear XLR input (can be used as DARS input or as traditional AES3 audio input)
• S / P-DIF input and output coaxial
• WordClock inputs and outputs (BNC)
• RedNet Control and Dante Control software
• Design: 19"/ 1 U

• From digital audio (Coaxial / Toslink) to analogue audio (L/R)
• Supports sampling rates 32 kHz, 44.1 kHz, 48 kHz, 96 kHz and 192 kHz
• Resolution up to 24-bit S/PDIF input on left and right channel
• Input connections: Toslink and RCA (coaxial)
• Output connections: 2x RCA (R+L) and 3.5 mm headphone jack
• Power supply via the included external power supply unit (DC / 5V)
• Power consumption: max. 0.5 W
• Dimensions: 51 x 41 x 26 mm
• Weight: 78 g

• Sample frequencies up to 768 kHz (PCM)
• AK4493 DAC chip
• DSD playback and recording
• 2.5 dB analog level reserve and digital headroom up to +4 dBFS
• Integrated sample rate converter
• Safety design and overload indicator for headphones
• Balanced mode for headphones
• Binaural crossfeed for convincing loudspeaker simulation via headphones
• Bass / Treble / Loudness function
• Adjustable filters for AD and DA conversion
• Hi-performance DSP for error-free calculation of all audio data
• 5-Band parametric EQ and low cut, separately adjustable for left and right channels
• Level meter
• Performance and status display
• Volume / Gain display
• 30-Band analyser in DIGICheck technology
• Channel status info screen
• Professional features: phase, base width, mono, M / S processing
• Elaborate discrete reference level switching via relay
• All settings can be saved
• Audiophile circuit board and circuit design with carefully selected components
• FPGA based firmware updates possible via USB
• Reduced self-jitter with SteadyClock FS, based on Femtosecond quartz
• AutoDark mode: switch off the lighting of the display, buttons and rotary encoders (standby button remains visible)
• Format: 9.5"/ 1 U
• Includes infrared remote control, cable whip for AES / EBU and SPDIF coaxial and external power supply unit (lockable)

Connections:

• 2 x Lline input combo XLR / jack 6.3 mm
• 2 x Line output XLR
• 2 x Line output 6.3 mm jack
• S / PDIF input and output coaxial
• AES / EBU input and output XLR
• ADAT input and output
• USB 2.0 connection

• A/D converter with optimised overload handling
• D/A converter with dual DAC architecture
• Quality headphone amplifier with a dedicated D/A converter
• Relay-based analog volume control for precise monitoring
• Master Clock with 4th generation AFC jitter management technology
• Intuitive software control panel for Mac or Windows
• System requirement for desktop software: Mac OS X 10.8 or later, Windows 7 or later
• Dimensions: 482 x 44 x 350 mm - 19", 1U
• Weight: 3 kg

Inputs:

• 1x World Clock
• 1x 10 MHz Atomic Reference
• 1x S/PDIF
• 1x TOSLINK
• 1x AES
• USB 2.0 Type B
• 1x Analog (ADC) on Combo XLR

Outputs:

• 1x USB 2.0 Type B
• 1x AES
• 1x SPDIF
• 1x TOSLINK
• 8x World Clock
• 1x Main Analog (DAC 1) XLR
• 1x Monitor Analog (DAC 2) 6.3 mm TRS
• 1x Headphone (DAC 3) 6.3mm TRS

• With USB and D/A converter
• Connection of 2 monitor pairs - can also be switched simultaneously
• 4 Input sources: 2x analogue
• 1x AES / SPDIF and 1x USB
• AES/SPDIF with thru-port
• 2x Headphone jack - monitor output or multiple sources
• Analogue input 1: 3.5 mm mini jack stereo -10 dBV
• Analogue input 2: XLR / jack combo jack
• USB input with up to 24 bit/192 kHz for Windows and Mac

• Bi-directional format converter between the MADI Optical and MADI Coaxial formats
• Stand-alone