Bass Pedals

Bundle offer comprising

• Effects Unit for Electric Bass
• Chorus/Flanger
• Analog delay line circuit
• Internal stereo switch
• X-over function leaves frequencies up to 100 Hz unmodulated
• Controller for bass, treble, intensity, rate and width
• Pressure switch for X-over function and flanger
• Robust footswitch
• True bypass
• Three status LEDs
• 6.3 mm jack inputs and output
• Runs on 9 V battery or the optionally available AC adapter Article Nr 409939

• Protective Cover
• Suitable for Electro Harmonix Nano series and MXR effect pedals with standard housing with 1 input and 1 output jack
• Suitable for most effect pedals with housing dimensions of approx. 110 x 60 x 32 mm
• With base plate for mounting on pedalboards of any manufacturer
• Protects effect pedals from dirt and weather influences
• Protects the settings from unintentional adjustment
• Mounts effect pedals securely on almost all pedalboards
• No permanent modifications required
• Includes universal pedal mounting plate type A and silicone adhesive pad

The intensity can be controlled by the touch; the more the response knob is turned up, the more the effect goes up... so sounds from soft and unobtrusive to 'completely over-wound' are possible.

With the additionally activated fuzz effect the overtones are ignited even more... maybe the craziest AutoWah effect of all time!

• For bass and guitar
• New compact housing
• Dimensions (WxDxHxD): 70 x 115 x 57 mm
• Power supply with a 9 V battery or a 9 V DC power supply unit (coaxial connection - negative polarity - not included, e.g. Article number 409939)

• For electric bass
• Overdrive
• Controls for Drive, Mix, Treble, Bass and Level
• FET Bypass
• Power supply 9 V battery or optional 9 V DC power supply (not included)

Harley Benton MiniStomp The Deep; effect pedal for electric bass, 5-band bass equalizer, true bypass for eliminating signal interference when switched off, solid metal chassis, volume output control, 62.5Hz, 125Hz, 500Hz and 4KHz control+-18db; level control, on/off switch, Jack input & output, power consumption 20mA, power input: 9V by power adaptor, type - center negative (not included), dimensions 92mmx38mmx32mm, weight 133gram

• Bass compressor
• Ultra compact multi-band compressor in studio quality
• Simple one-button operation
• Perfectly matched to Bass
• TonePrint: upload signature sounds or make your own
• True bypass
• Current consumption: 100 mA
• Dimensions (L x W x H): 98 x 63 x 57 mm
• Weight: 230 g
• Power supply via 9V D - power supply (coaxial plug - negative pole on the inside, not included, suitable power supply available, art. 409939)

Bundle offer comprising

• Effects Unit for Electric Bass
• Chorus/Flanger
• Analog delay line circuit
• Internal stereo switch
• X-over function leaves frequencies up to 100 Hz unmodulated
• Controller for bass, treble, intensity, rate and width
• Pressure switch for X-over function and flanger
• Robust footswitch
• True bypass
• Three status LEDs
• 6.3 mm jack inputs and output
• Runs on 9 V battery or the optionally available AC adapter Article Nr 409939

• Protective Cover
• Suitable for Electro Harmonix Nano series and MXR effect pedals with standard housing with 1 input and 1 output jack
• Suitable for most effect pedals with housing dimensions of approx. 110 x 60 x 32 mm
• With base plate for mounting on Rockboard pedalboards with click system
• Distance of QuickMount mounting holes (W x D): 51 x 102 mm
• Protects effect pedals from dirt and weather influences
• Protects settings from unintentional adjustment
• Mounts effect pedals securely on RockBoard pedalboards
• No permanent modifications required
• Includes QuickMount pedal mounting plate type A for RockBoard pedalboards and spare screws

• Overdrive / distortion
• Wide range of possible sounds for bass and guitar
• Developed by Bjorn Juhl
• True bypass
• Controls for treble, volume, drive, low boost
• Bypass footswitch
• Status LED
• Input: 6.3 mm jack
• Output: 6.3 mm jack
• Power supply: 9 V battery or 9-18 V DC power supply (2.1 mm x 5.5 mm barrel connector, polarity (-) inside, not included)
• Power consumption: 12 mA
• Housing made of brushed aluminium
• Dimensions (L x W x H): 100 x 47 x 48 mm
• Weight: approx. 160 g

Note: Register your product at www.w-distribution.de/Warranty and extend the warranty to 4 years.

Bundle offer comprising

• Effect Pedal
• For E-Bass
• Classic Analog envelope filter sounds
• True bypass
• Controller for Dry, FX, Decay, Q and Sens.

• Protective Cover
• Suitable for Electro Harmonix Nano series and MXR effect pedals with standard housing with 1 input and 1 output jack
• Suitable for most effect pedals with housing dimensions of approx. 110 x 60 x 32 mm
• With base plate for mounting on pedalboards of any manufacturer
• Protects effect pedals from dirt and weather influences
• Protects the settings from unintentional adjustment
• Mounts effect pedals securely on almost all pedalboards
• No permanent modifications required
• Includes universal pedal mounting plate type A and silicone adhesive pad

• Bass overdrive and clean boost
• Controls: Volume, drive, blend, treble and -10 db switch (for active instruments)
• Dimensions (WxDxH): 65 x 110 x 57 mm
• Runs on 9V battery or 9V power supply (included)

• Is the small version of the MB octave
• Delivers fast tracking with clear sound even in the lower range
• The levels of the original signal and the octave can be mixed in the desired ratio using the "Dry" and "Oct" controls
• Status LED
• Bypass footswitch
• Input and output: 6.3 mm jack
• Mains adapter connection: Coaxial connector 5.5 x 2.1 mm (negative polarity inside)
• Power supply with a 9-12 V DC power adapter (not included, suitable power supply: Art.409939)
• Current consumption: 35 mA
• Dimensions (W x D x H): 45 x 95 x 50 mm
• Weight: 157 g

Note: Battery operation is not supported.

Specially tailored to the needs of bass players, it has 3 controls for the very critical mid frequencies of 400 Hz, 500 Hz and 800 Hz, which determine the fundamental character of the bass sound. Each of the 7 frequencies can be raised or lowered over a range of ± 15 dB. This makes the special character of every gaming technique perfectly clear, from dynamic fingerpicking to aggressive slapping,

• 7-band graphic equaliser
• Specifically for the frequency range of the electric bass
• Since the frequency range is up to 50 Hz, the GEB-7 is also suitable for matching the bass of a double bass with pickup
• Dimensions (WxDxH): 73 x 129 x 59 mm
• Weight: 440 g
• Power consumption: 16mA
• Power supply with a 9V battery or a 9V DC power supply (coaxial connection - negative pole / terminal inside, not included) - For example, see Art. 409939 for availability

• With different amp characters
• Controls for Level, Blend, Drive, ERA, buffer bypass
• Original Hybrid FET/CMOS gain stages
• Operates on 9V DC power supply (not included - available separately under article nr 409939)
• Made in Finland

• Chorus
• Digital
• Metal housing
• True Bypass
• Status LED
• Controls Level, Tone, Depth and Rate
• 6.3 mm Mono jack input / output
• Power supply via 9 V DC power supply (not included, available under Art.409939)
• No battery operation possible
• Power consumption 110 mA
• Dimensions (W x W x H): 93.5 x 42 x 52 mm
• Weight: 145 g

• Controls: High Pass, Low Pass, Drive, Drive Vol, Clean Vol
• Drive Select
• Switch: High, Low (Drive Sensitivity)
• LED: Effect On
• Footswitch: Effect Bypass
• Input: 6.3 mm jack
• Output: 6.3 mm jack
• Mains adapter connection: Hollow female plug 5.5 x 2.1 mm
• Power supply with a 9 - 18 V DC (40 mA) mains adapter (not included, suitable optional mains adapter: Art. 409939)
• Dimensions (W x D x H): 104 x 127 x 59 mm
• Weight: 0.5 kg
• Made in USA

All the features of the craved B7K, with the ability to better sculpture the tone. On the Low Mids the center frequency can change from 1 kHz to 500 Hz, and on the High Mids from 3 kHz to 1.5 kHz.

• Overdrive
• Delivers punchy, dynamic sound of the B3K plus a four-band EQ and a DI Out for even greater studio and live versatility
• Controls: Blend - Level - Drive - Low - Low Mids - Hi Mids - Treble
• Buttons: 1 kHz/500 Hz - 3 kHz/1.5 kHz - Ground Lift
• Switches: Attack - Grunt
• LED: Effect On
• Foot switch: Effect bypass
• True bypass
• Connections: Input (6.3 mm jack) - output (6.3 mm jack) - direct output (6.3 mm stereo jack) - parallel output (6.3 mm jack) - power supply connector (coaxial jack 5.5 x 2.1 mm - negative pole inside)
• Power consumption: 20 mA
• Power supply with a 9 V DC power supply (not included - matching power supply: Article Nr 409939)
• Dimensions (W x D x H): 106 x 120 x 45 mm
• Weight: 350 g
• Made in Finland

Note: No battery operation possible.

• From subtle adjustment of the dynamic range up to intensive compression of the sound
• Compressor with soft-knee characteristics - of 1: 1 Ratio to> 20: 1
• Voltage Controlled Amplifier (VCA)
• Max. Compressor boost: +33 dB
• Adjustable attack time: from 8 to 27 ms
• Uncompressed signal can be smoothly mixed with the compressor effect via the "Blend" control
• Mid / Full / High switch selects between different sound characteristics
• Volume controls with boost reserves
• Current consumption: 21 mA (operation), 19 mA (bypass)
• Dimensions (L x W x H): 127 x 66 x 37 mm
• Weight: 304 g
• Made in USA
• Matching power supply: Art. 409939 (not included)

• State-Of-The-Art Tube Compressor
• With true bypass circuit
• Controls: Gain, Clean, Threshold, Ratio, Attack, Release, Volume
• Switch for True Bypass
• Power supply via external DC 12 V power supply (included)
• Input and output: mono jack socket 6.3 mm