DI Boxes

• 2 Independent ProDI channels
• 15 dB pad
• Frequency response: 20 Hz - 18 kHz
• Ground lift
• Connections: Jack in / out, XLR out
• Ideal for stereo sources such as keyboards, drum computers and digital recorders

• For signal transmission from musical instruments to mixing console or amplifier
• Disturbances such as humming loops are avoided by transformer coupling.
• Galvanically isolated input and output
• 3-Way attenuator switch (0/-20/-40 dB)
• Ground lift switch
• Instrument loop-through output
• Broadband balancing transformer
• Frequency range: 15 - 30,000 Hz
• Input impedance: 50 kOhm
• Output impedance: 600 Ohm (symm.), 50 kOhm (asymm.)
• Gain: 0/-20/-40 dB
• Gear ratio: 10:1
• Inputs: 1 x 6.3 mm Jack, asymmetrical
• Outputs: 1 x 6.3 mm Jack, asymmetricral, parallel out XLR, asymmetric
• Metal housing
• Dimensions (W x H x D): 74 x 45 x 130 mm
• Weight: 0.56 kg

• In metal housing
• Max. input level +10/ +50 dBu
• Ground/ lift switch
• With integrated switchable resistor network for extremely high input level (e.g. guitar box)
• XLR output
• Dimensions (W x D x H): 100 x 130 x 40 mm

• Size: 19"/1U, 90 mm deep
• 4 Channels
• XLR output is also available as a parallel port on the back
• The active circuitry allows for a high input impedance of 1 Mohm and greater sensitivity of the input signal (typical difference between in and out: -4 dB)
• Max. output voltage is +10 dBu with phantom power
• Transformer balanced output
• Via a special "floating ground" circuit the ground lift switch functions even with phantom power
• Mains adapter is firmly connected to the device
• 5 Year manufacturer's warranty

• Servo balanced circuit for absolutely linear frequency response
• Connection to amplifier outputs up to 3000 W possible
• Ground lift
• Switchable input attenuation
• Installation size: 19", 1 U

• Input: Jack
• KLI link pad +20 dB
• 0 db or -30 dB switchable
• 2 XLR outputs
• Stereo or mono switchable
• Ground lift
• Galvanic isolation
• Sturdy metal housing with corner protectors
• 10 - 40,000Hz
• Operates with 1x 9 Volt battery

Caution: Not designed to use with phantom power!

• Midas transformer
• 2x 6.3 mm jack inputs
• 2x -15 dB pad switch
• Ground lift
• Neutrik XLR outputs
• Sturdy, compact aluminium housing with protective, hard rubber corners
• Frequency range (±1 dB): 20 Hz - 30 kHz
• Input impedance: 500 kOhm (10 kOhm/PAD)
• Output impedance: 150 Ohm (at 1 kHz)
• Signal-to-noise ratio: 108 dBu
• Dimensions (W x H x D): 118 x 64 x 112 mm
• Weight: 0.54 kg

• CineMag USA output transformer
• Pad: adjustable from -3 dB to -30 dB
• XLR output: 600 ohms
• Microphone level
• Input impedance: 1 mega ohm
• Phase reverse
• Ground lift
• Operation on +48 V phantom power
• Passive operation is also possible
• Robust aluminium housing construction
• Dimensions: 190 x 70 x 190 mm
• Weight: 0.5kg@Note: No load box - depending on the amplifier, proper speaker load is required.

• For bridging long cable paths between guitar and amp
• Consists of 2 modules (Input - Output)
• XLR in/out + Jack in/out
• Incl. 15 V DC power supply

• Class-A tube circuit with EF86 tube
• Up to +54dB gain at line output and +32dB at D.I. output
• Selectable tube mode (triode/pentode)
• Gain boost switch
• Switchable -12dB attenuator / mute
• Switchable bass and treble boost (each with two steps)
• Instrument input: 6.3 mm jack, unbalanced, for guitar, bass and keyboards
• Line and D.I. output: XLR
• Thru-output: 6.3 mm jack, unbalanced
• Line-output: 6.3 mm jack, unbalanced
• Aux-input: 3.5 mm stereo jack
• Headphone output: 3.5 mm stereo jack
• Frequency response: 10 - 50000 Hz (+/- 3dB)
• Ground lift switch
• Solid metal housing
• Dimensions (W x H x D): 153 x 90 x 290 mm
• Weight: 1.48 kg

• Frequency range: 10 Hz –100kHz
• Max. output level: +6 dBu (battery powered) / +14 dBu (phantom powered)
• Max. input level: +4/+24/+44 dBu
• Dynamic range: > 100 dB
• Input: Jack and XLR female
• Input impedance 470 Ohm
• Output: XLR male
• Output impedance
• THD:
• Switchable low pass filter -3 dB @ 30 kHz
• PAD switch (0dB, -20dB, -40dB)
• Phase switch (normal / invert)
• Switchable ground lift
• Power requirements : 9V battery or phantom power
• Dimension: 44,5 x 107 x 89 mm
• Weight: 340 g

• Eliminates hum caused by ground loops
• For balanced and unbalanced signals
• Linear frequency response from 20 - 20,000 Hz
• 2x 6.3 mm Jack inputs
• 2x 6.3 mm Jack outputs
• Switchable ground lift for both channels
• Switchable pad
• Switchable phase for the left channel
• Robust metal housing

• For eliminating ground loops
• 2x XLR in/out
• Switchable ground/lift
• Switchable Polarity Reverse 180°
• Especially suitable to eliminating sub-mixers

• Superior phase coherence
• Rupert Neve custom transformer
• Input headroom of +21.5 dBU
• Power supply 48 V phantom power
• Ground lift
• Instrument and speaker mode for various applications
• Connections: in - 6.3 mm jack, thru - 6.3 mm jack, out - XLR

• With adjustable input level
• Frequency range: 30 - 20,000 Hz
• 2x 6.3 mm jack inputs
• 2x RCA inputs
• 1x 3.5 mm stereo jack input
• XLR L/R output
• Switchable Ground/Lift
• Robust metal housing

Palmer tauber; passive 1 channel microphone summing unit; road-ready housing made of aluminum and steel; for two dynamic microphones or two condenser mics; permeable to phantom power; reliable problem solver for sound reinforcement systems with too few mixer channels; extremely fail-safe; for connecting two microphones to one microphone; connections: input: 2x balanced XLR, output: 1x balanced XLR; no power supply needed; input impedance (1 kHz): 644 ohms; output impedance (1 kHz): 400 ohms; dimensions (WxHxD): 50 x 140 x 68 mm; weight: 0.36 kg; included in delivery: 1x Palmer tauber, 1x label (tour label), 1x rubber feet; engineered in Germany

• 1 Channel
• Operable with battery or phantom power
• Pad switch (0 dB / -30 dB)
• Input jack link
• Symmetric XLR output
• 5 year manufacturer's warranty

• Inputs: XLR and 6.3mm jack
• Link: 6.3mm jack
• Output: XLR
• Output with ground lift
• Pad: -20/ 40 dB
• Galvanic isolation

• Suitable for stage and studio
• 4 Inputs: XLR / 6.3 mm TRS jack
• Switchable ground lift
• Switchable boost per channel: 6/12/18 dB
• 8 Outputs: XLR
• Switchable -20 dB output attenuation
• Dimensions (W x H x D): 483 x 71 x 44 mm
• Weight: 1.4 kg