Preamps

• With digital out, stereo
• Based on the well-known Class A amplifiers
• Legendary Neve sound
• trafosym i/os
• With ADC up to 192 kHz and DSD
• Analogue insert point ahead of AD converter
• Size: 19" / 1 RU

• Switchable +15 / +30 dB amplification
• Ideal for low output ribbon or dynamic microphones
• Switchable load impedance (8 stages)
• Class-A FET transistors
• Low self-noise
• An additional output stage for an independent load
• Allows long cable runs and reduces the susceptibility from RF interference
• Gold-plated XLR contacts
• Robust all-metal housing
• Requires 48 V phantom power

• Microphone input transformer by Lundahl
• 60 V technology (125 dB dynamic at 30 dB gain)
• Separately controllable solid-state and tube preamps for seamless transition from cleaner transistor pre-amplification to tube saturation
• Peak limiter
• Switchable input impedances (200 Ohm, 1.2 kOhm and 10 kOhm)
• Adjustable high pass filter 12dB / 50Hz
• 48V phantom power
• Frequency response linear up to 200 kHz (!)
• Also ideal for mobile use

• USB Port
• 2 Separately adjustable XLR/jack combination inputs
• Switchable 48 V phantom power
• Stereo jack monitor and headphone output
• Powered by USB, battery or AC adapter (not included)
• Latency-free controllable monitor signal
• Frequency range: 20 - 20,000 Hz
• Dimensions: 44.5 x 117 x 119 mm
• Weight: 0.59 kg

• Digitally controlled
• With compressor
• Extremely low inherent noise
• Instrument input with automatic switching
• 48 V phantom power
• Transition from processed material to unprocessed material (dry / wet)
• Frequency range from 3 Hz to 200 kHz (without KompSat) 3 Hz to 150 kHz (with KompSat)
• Maximum output +22 dBu
• Input impedance 600 Ohm
• Output impedance less than 38 Ohm
• Design: 19" / 1 U

• 2-Channel
• Large bandwidth from 10 to 200,000 Hz for "open" sound
• Mic / Line switchable
• Phantom power 48 V
• Tunable Hi and Lo Cut
• Phase reverse
• Adjustable output level (VU meter)
• Inputs and outputs: Balanced XLR / jack
• Design: 19"/ 1U

• Gain: 25 dB
• Phantom power: 48 V
• 2 XLR inputs / outputs
• Frequency range: 10 - 20,000 Hz (± 1 dB)
• Dimensions: 65 x 39 x 85 mm
• Weight: 0.37 kg

• High end mic preamp
• Complete symmetric signal processing
• 23 dB INPUT & 32 dB Output Headroom
• Gold plated contacts for sockets and switches
• Stereo level tolerance max 0.04 db
• Optional: BRÜEL & KJÆR (DPA) + 130V Mic Inputs and "DC Inputs" ideal for ribbon microphones
• 19 "rack format 2U

• Classic 1073 preamp design with 70 dB gain
• Discrete Class A circuit
• Input and output transformers from Cinemag
• Channels 1 and 2 with additional DI input
• Switchable 48 V phantom power per channel
• Max. Input level Mic In: +1 dBu / DI In: +18 dBu
• Frequency range: 10 - 30000 Hz
• Gain Mic In: 12 to 70 dB adjustable in steps
• Switchable phase inversion
• THD + N Mic In: 0.02% (+45 dB Gain, +4 dBu Output) / DI In: 0.03% (+25 db Gain, +4 dBu Output)
• EIN (Equivalent Input Noise) Mic In: -105 dBu / DI In: -100 dBu
• Input impedance Mic In: 200 Ohm / DI In: 1.1 MOhm (unbalanced)
• Max. Output level: +28 dBu
• Output impedance: 600 ohms
• 4 Balanced XLR inputs
• 2 Unbalanced 6.3 mm jack inputs
• 4 Balanced XLR and jack outputs
• External power supply
• Height: 2 U
• Width: 19"
• Depth: 178 mm
• Weight: 3.7 kg

• Frequency range: 10 - 20,000 Hz (-1dB)
• 4 Toroidal transformers
• 2 Separate signal paths
• 2 Individually selectable modes: Launcher Mode / Saturate Mode
• 2 Combo inputs: Mic/Line (XLR/jack)
• 2 Outputs: 3-pin XLR
• Dimensions (L x W x H): 159 x 98 x 50 mm
• Weight: 950 g

Launcher mode:

• Gain: +26 dB (load > 1 kOhm)
• Max. output level (0.5% THD): 8.3 dBV (2.6 V)
• Power supply: 48 V phantom power
• Impedance: 1 kOhm

Saturate mode:

• Gain: 0 dB
• Max. output level: 5 V
• Power supply: no phantom power required

• Microphone preamp and DI box with compressor
• Two channel operation with crossfading
• Silk-circuit
• Microphone gain up to 66 dB
• DI-Gain up to 30 dB
• Balanced / unbalanced Hi-Z input
• 48 V Phantom power
• Phase reversal
• Threshold control in compressor
• Flexible adjustment via internal jumpers

• Circuit design of the legendary 1081 preamps
• 9.5" Housing
• Two devices can be connected to an 8-channel unit in 19" housing
• Remote control via Mac / Intel computer and Neve remote control software
• Selectable XLR microphone or electronically balanced line input
• Switchable 48V phantom power per channel
• Digital I/O options: Firewire / AES interface with 4-channel A/D or D/A conversion
• Analog insert per channel

• Class-A circuit
• Phantom power
• Phase switch
• Impedance selection (Hi-Z, MID and Low)
• Input selector (microphone or instrument)
• 2-Digit LED display (DB Gain)
• Level meter display
• Gain control and low-cut
• Special feature: Tone can be changed by 3 settings - Speed ​​(how fast should the pre-amp react)
• Just harmonic distortion and odd harmonic distortion
• XLR input / output on the back
• Instrument input (jack) on the front
• Format: 19" / 1 U

• Mic preamps with automatic gain reduction (talkover)
• Sensitivity
• Adjustable Rolloff and release time
• Microphone input: XLR
• AUX Input: RCA
• Stereo in / output: RCA
• Power supply included

• 6.3 mm jack female to XLR 3-pin male (balanced)
• Low noise Class A JFet amplifier
• 3 dB amplification
• Max. input level 15 dBv

Note: Requires 24/48 V phantom power.

• Usable as a standalone or rack mount for Neve racks/ series 80
• Class A Design microphone preamp
• 3-Band EQ (fixed HF plus two switchable filters with cut/ boost) and high pass filter
• Mic and line input
• Including power adapter

• 8 Combo socket Microphone / Line / Instrument inputs on the front
• Separate Sub-D25 line and mic inputs on the back
• 8 Line outputs Sub-D25
• Remote control software for easy access to all parameters and recall functionality
• Per channel: 48 V phantom power, 25 dB pad, switchable input impedance (300/1300 ohms), 80 Hz low cut
• Phase inversion
• Separate stereo monitor path with independent level control
• imensions: 19"/ 2U