Bass Pedals

• Chorus / vibe
• Combines the Jam Pedals Effects Waterfall & Ripple in a single housing
• Both effects work both as a stand-alone but also combined with a few new features
• The combination of the two creates great Univibe-tones
• With the medium speed multiplier footswitch you can generate sounds that range from Leslie speaker simulations to ring modulator effects and extreme wobbles
• True bypass
• Controls: Waterfall Speed ​​& Depth, Ripple Speed
• Switches: Chorus / Vibrato Toggle Switch, Intensity Toggle Switch
• LED: Effect On, Boost
• Footswitch: Waterfall Bypass, Ripple Bypass, Speed ​​Multiply
• Input: 6.3 mm jack
• Output: 6.3 mm jack
• Expression pedal connection: 6.3 mm stereo jack
• Power supply connection: coaxial connector 5.5 x 2.1 mm, negative polarity inside
• Power consumption: 18 mA
• Power supply via 9 V battery or 9 V DC power supply (suitable power supply Art.409939 - not included)
• Dimensions (W x D x H): 94 x 120 x 30 mm
• Weight: 350 g
• Made in Greece

With the LMB-3, you can straighten the output levels of your pickups to get a consistent sound of your bass over the entire dynamic range. For the most accurate tuning, the LMB-3 has not only a Threshold control but also the newly developed RATIO parameter. This makes you much more flexible when you set the limiter. If you want more transparency, attack and brilliance, you can use the Enhance slider. This gives you a punchy, sharp, contoured sound, which is outstanding on the stage.

• Particularly flexible and versatile by Threshold and Ratio Control
• Controls: Pedal switch, LEVEL knob, ENHANCE knob RATIO control, THRESHOLD control
• Special Enhance control to reinforce transparency, Attack and brilliance of the bass sounds
• Very robust construction
• Connectors: Input, Output, AC adapter (9V DC)
• Battery and mains operation possible
• Power consumption: 17 mA
• Dimensions (WxDxH): 70x125x55 mm
• Weight: 430 g

• 11 Different types each emulating the sound of different vintage synthesizers
• Monophonic pedal: Synthesizes one note per oscillator
• Controls: Type, Ctrl, Sens, Volume (Synth/Dry)
• Foot-switch: Preset, Bypass
• Input: 6.3 mm Jack
• Output: 6.3 mm Jack
• Dry output: 6.3 mm Jack
• Synth output: 6.3 mm Jack
• True Bypass
• Mains adapter connection: Hollow plug socket 5.5 x 2.1 mm, minus pole inside
• Current consumption: 125 mA
• Power supply with a 9 V DC mains adapter (included in delivery)

Note: No battery operation possible!

• Digital/analogue dual bass octave & compressor
• Effects can be used simultaneously or individually and in any order
• Effect A: polyphonic octave generator with 11 presets
• Sub/overtone and dry level controls
• On/off footswitch with LED indicator
• Effect B: analogue optical compressor
• Volume/EQ/Comp control
• On/off footswitch with LED indicator
• 3-Way switch for effect order and effect-only mode
• Power supply via 9 V DC mains adapter (not included - suitable mains adapter: Art.409939)
• Power consumption: 200 mA
• True bypass design
• Dimensions: 120 x 95 x 37 mm
• Weight: 0.32 kg

Note: Battery operation is not supported.

• 3 different distortion types selectable via toggle switch: Tube mode for classic / gentle tube distortion / heavy mode for aggressive germanium fuzz sounds with ample low-end and fuzz mode for modern, synth-like sounds
• Stereo signal
• USB port for connection to computer and firmware updates
• MIDI-capable via optional Soundblox HUB with up to 128 slots (not included)
• Further parameters and algorithms can be controlled via Neuro Mobile App (iOS& Android) and PC und Mac
• Can be connected to a smartphone via the headphone jack
• Controls for Drive / Clean / Tone and Level
• Multi-function jacks to connect Source Audio Hot handheld controllers or the Toolblox DualExpression for real-time control of modulation or any controller
• Universal bypass: on request analogue buffered or relay-switched true bypass possible
• Brushed aluminum housing / anodised
• Dimensions (L x W x H): 114 x 70 x 51 mm
• Incl. 9 V DC power supply

One Control Crimson Red Bass Preamp, bass preamp effects pedal, reproduces the iconic old school 60s / 70s electric bass sound, powerful low-end, similar to a single 15" or 18" woofer setup, designed by Bjorn Juhl, true bypass, controls for Volume, Brilliance, Gain, bypass footswitch, status LED, brushed aluminum housing, 6.3 mm mono in / output jacks, power supply via 9V battery or optional 9 - 15V DC adapter, 2.1 x 5.5 mm barrel plug, polarity (-) center (battery is not included in the delivery), current draw 1 mA, dimensions (L x W x H) 100 x 47 x 46 mm / 3.93" x 1.85" x 1.81", weight ca. 160 g / 0.35 lbs

• Vintage circuit
• Modified for modern bassists
• Fuzz tone
• Controls for Tone, Fuzz, Dry and Wet
• Footswitch
• 9V battery or optional AC adapter (not included here)

• Provides the distortion and flexibility of the alpha-omega in a smaller format
• With the two distortions, it offers the same harmonically rich, various sounds as its big brother
• Knobs: Blend - mod - level - drive
• Buttons: Growl - bite
• LED: Effect on/ off
• Foot switch: Effect bypass
• True bypass
• Input and output: 6.3 mm Jack
• Power supply connection (coaxial socket 5.5 x 2.1 mm - negative pin inside)
• Power consumption: 20 mA
• Power supplied with 9 V DC power supply (not included - suitable power supply e.g. Art. 409939)
• Dimensions: (W x D x H) 75 x 111 x 45 mm
• Weight: 250 g
• Made in Finland

Note: No battery operation possible.

• Chorus/Flanger
• Analog delay line circuit
• Internal stereo switch
• X-over function leaves frequencies up to 100 Hz unmodulated
• Controller for bass, treble, intensity, rate and width
• Pressure switch for X-over function and flanger
• Robust footswitch
• True bypass
• Three status LEDs
• 6.3 mm jack inputs and output
• Runs on 9 V battery or the optionally available AC adapter Article Nr 409939

Slight traces of use

• New 2020 version
• Preserves the deep bass
• A new Range-switch makes possible to move the optimized focus area of the tracking to either higher up or lower down the fretboard.
• By adding a seamless tone control you can go from a present, focused octave sound that cuts through the mix all the way to a sub-bass backdrop of lows that discreetly supports the note you play
• Control: Normal, Tone, Octave
• Switches: Range high / low
• LED: effect on
• Footswitch: bypass effect
• Input: 6.3 mm jack@Output: 6.3 mm jack
• Mains adapter connection: Coaxial connector 5.5 x 2.1 mm, negative polarity inside
• Current consumption: 40 mA
• Power supply via 9 V battery or 9 V DC power supply (suitable power supply Art.409939, not included)
• Dimensions (W x D x H): 66 x 114 x 48 mm
• Weight: 315 g

• Compressor
• Controls: Input, output, attack, release, mix, SC HP
• Switch: Ratio, tone + colour
• LED: Effect on, input, gain reduction
• Footswitch: Effect bypass
• Input: 6.3 mm Jack
• Output. 6.3 mm Jack
• Send/return: 3.5 mm Jack
• Power adapter connection: Barrel connector, 5.5 x 2.1 mm, negative polarity inside
• Current consumption: 100 mA
• Power supply via a 9 - 18 V DC power supply (not included - suitable power supply under Article Nr. 409939)
• True bypass
• Dimensions (W x D x H): 66 x 122 x 64 mm
• Weight: 454 g
• Colour: Blue sparkle

Note: Battery operation is not supported.

@

• Compressor
• Switchable mode for guitar or bass
• Bass Mode adapts all factory presets for use with an electric bass: adjusted dynamic range and attack characteristics
• 6 Selectable compressor styles: 2x Optical, 1x VCA, 1x FET, 2x Dual-Band including LA2A Optical Compression for warm, smooth compression
• 1176 Feedback FET Compression - extremely fast attack
• LED Optical Compressor - similar concept to LA2A, but with faster, 'dirtier' attack and rackmount VCA-style compression (fast attack with hard knee)
• Two selectable dual compressor modes can be used either serially, in parallel or as a band split
• Additional compressor types available via the Neuro Editor
• Direct access to all relevant compressor parameters
• Auto Makeup Gain automatically increases or decreases the makeup gain, depending on the amount of compression applied
• Look Ahead Compression creates an imperceptible latency in the signal that 'looks ahead' and allows for a particularly fast and smooth attack without additional distortion or artefacts
• Side Chain Compression uses the signal from Input 2 to trigger the compression of the signal from Input 1
• 3-Band parametric EQ or 8-band graphic EQ available via Neuro Editor
• Adjustable noise gate
• Neuro Desktop Editor or Neuro Mobile App to create, save and share presets
• Full MIDI capabilities with the Source Audio Neuro Hub
• Controls for threshold, ratio (tone), blend (attack), output (release)
• Preset toggle switch for 6 onboard presets
• ALT control key activates secondary function of the pots
• Bypass footswitch
• Status LEDs
• Brushed anodised aluminium body
• Universal bypass - selectable between analogue-buffered or relay-switched true bypass
• 2 Stereo inputs: 6,3 mm TRS jack
• 2 Stereo outputs: 6.3 mm TRS jack
• 1 Mini USB port for connection to PC (Windows and Mac compatible)
• 1 Control input for controlling up to four parameters with an external expression pedal: 3.5 mm jack
• Mains adapter connection: Hollow female plug 5.5 x 2.1 mm (negative pole inside)
• Power supply via 9 V DC mains adapter
• Power consumption: 165 mA
• Dimensions (L x W x H) : 114 x 70 x 51 mm
• Incl. power supply unit

Note: Battery operation not supported

Note: Register your product at www.w-distribution.de/Warranty and extend the warranty to 4 years.

• Overdrive
• Controls: level/ blend, low, high and drive
• 1 Input
• 1 Output
• 1 Line out (balanced DI out)
• Adaptive distortion" - optimal distortion in any pitch
• Matching power supply optional 409939 (not included)