Switch Pedals

Morley ABY-G - Gold Series ABY Switcher, A/B/Y switch for flexible signal routing, can be used as input or output selector, inputs and outputs can be used in both directions (one input to two selectable outputs or two selectable inputs to one output), choose between A or B (separate) or A and B (combined), true bypass, A and B, A or B footswitches, status LEDs, quick-clip battery door, cold-rolled steel housing, 3x 6.3 mm mono input / output jack, power supply via 9V battery or optional 9V DC adapter, 2.1 x 5.5 mm barrel plug, polarity (-) center, passive operation without power supply possible (status LEDs without function), dimensions (L x W x H) 133 x 82 x 51mm / 5.25" x 3.25" x 2", weight 390 g / 0.86 lbs

• Jack input for footswitch
• Is then converted into MIDI
• Powered via MIDI

The SE-SWB A / B Box (yes they could still work on the name...) is designed in such a way that the user can route both 2 inputs to one output as well as 1 input to 2 outputs. So you get 2 guitars without re-plugging on an amp or a guitar on 2 amps. An LED indicates where you are on the signal path. If you do not need it, the battery can be dispensed with. The design is such that you can even switch boxes with it. Convenient and very cost-effective. With higher volumes when switching between the two amplifiers, a low guitar signal can go through the unused amp.

• Signal path can be used in both directions
• 3 Jack sockets: in / out
• 9V power supply socket
• Led status display
• Footswitch
• Dimensions (WxDxH): 75.5 x 116 x 49 mm

• Allows to extend the MIDI functions of the Crocodile Tail Loop and to have full control over all MIDI-enabled effect pedals
• Send CC # (Control Change) and PC (Program Change) data simultaneously via 16 MIDI channels
• 70 user-defined MIDI presets
• POL technology (Power On Link cable)
• Pushbuttons: Mode - Off - OK - Up - Down
• Display: LED display
• Footswitch: Effect Bypass
• Connections: Crocodile Tail Loop LAN Cable Input - MIDI Out
• Power consumption: 50 mA
• Power supply via Power Link cable
• Dimensions (W x D x H): 94 x 39 x 35 mm
• Weight: 100 g

• 128 Presets
• 5 Loops
• 2 Fixed loops and 2 sequential loops, 1 isolated loop, Midi PC # / CC # functions
• Each preset contains two channels of PC # / CC #
• 4 Midi input functions
• 128 presets can be accessed via any external MIDI controller
• On the Fly mode allows the user to turn on / off each loop during operation
• 2 Footswitches for amp channel switching
• Low power consumption less than 150 mA
• Dimensions (W x D x H): 260 x 88 x 55 mm
• Weight: 1.0 kg

• Footswitches provide control over six independent loops
• 100 Individually configurable presets (20 banks, 5 presets per bank)
• 2 Selectable switching modes (Recall Mode, Direct/Edit Mode)
• Master bypass function
• 6x DC hollow plug outputs (2.1 x 5.5 mm) to loop through the power supply
• True bypass
• 6 footswitches (Bank/Loop 1, PGM 1/Loop 2, PGM 2/Loop 3, PGM 3/Loop 4, PGM 4/Loop 5, PGM 5/Loop 6)
• Program / Direct selector switch
• Status LEDs
• Inputs/outputs: 6.3 mm jack plug
• Power supply via 9 V DC mains adapter with 2.1 x 5.5 mm hollow female plug, polarity (-) inside (mains adapter not included)
• Power consumption: max. 150 mA
• Metal housing
• Dimensions (L x W x H): 41 x 370 x 48 mm
• Weight: 440 g

Note: Battery operation is not supported

Note: Register your product at www.w-distribution.de/Warranty and extend the warranty to 4 years

• Boutique style switch with 2 independent true bypass circuits for managing multiple signal paths
• Unoccupied loops can be used as mute switches
• Can also be used as an amp switcher when the send outputs are connected to different amplifiers
• Input / Output, Send / Return A / B
• 2 x On / Off switch with status LED
• Loop On / Off switch
• Can be operated with a 9 Volt battery or a 9 Volt power supply (for example: Article 409939 - not included in delivery)
• Dimensions (W x H x D): 120 x 56 x 95 mm
• Weight: 0.380 kg

• Programmable 5-channel true bypass loop switcher for effects pedals
• Foot switches provide control over five independent loops and a separate tuner output
• Extremely simple and intuitive programming
• 150 Freely configurable presets (30 banks, 5 presets per bank)
• 2 Selectable switching modes: Program Mode, Direct Mode
• Integrated BJF buffer circuit with separate inputs and outputs
• 2 Additional connections for switching signals (amp footswitch)
• 5 MIDI PC and 5 CC signals can be stored in each preset
• 6 x DC barrel connector outputs (2.1 x 5.5 mm) for looping through the power supply
• True bypass
• 6 Foot switches: Bank, PGM 1 / L 1, PGM 2 / L 2, PGM 3 / L 3, PGM 4 / L 4, PGM 5 / L 5, Mute / Foot Switch
• Program / Direct switch
• 3 Button switches for programming the presets
• Status LEDs
• 6.3 mm mono jack inputs / outputs
• 5-Pin MIDI input / output
• Power supply via 9V DC power supply with 2.1 x 5.5 mm barrel connector, polarity (-) inside (power supply not included)
• Current consumption: max. 220 mA
• Metal housing
• Dimensions (L x W x H): 62 x 440 x 49 mm
• Weight: 620 g

Note: Battery operation is not supported.Note: Register your product at www.w-distribution.de/Warranty and extend the guarantee to 4 years.

• For Timeline, BigSky and Mobius
• Loop control mode (only for timeline)
• Bank mode
• Preset mode
• Tap mode
• No additional power supply required
• Incl. stereo jack cable
• Made in USA

• External footswitch for Tap Delay effect pedals
• Compatible with a variety of effect pedals
• 6.3 mm TRS Tap Tempo output
• 3 internal DIP switches for TRS adjustment of the output socket
• Metal housing

• Usable as A/B True Bypass Looper, simple True Bypass Looper, A/B Box Amp Input Switcher or Effect Loop A/B Switcher
• Controllable via JHS Red remote
• Loop 1/2 toggle switch to select between Send/Return loops 1 and 2
• Status LEDs
• Metal housing
• 2 X 6.3 mm Mono send (1/2) jacks
• 2 X 6.3 mm Mono-K left return (1/2) jacks
• 2 6.3 mm Mono inputs
• Power supply via optional 9V DC power supply (2.1 x 5.5 mm hollow plug, negative polarity inside)
• Power consumption less than 100 mA
• Dimensions (W x D x H): 65 x 115 x 45 mm
• Weight: 300 g
• Made in USA

Note: Battery operation not supported

Note: Register your product at www.w-distribution.com/Warranty to extend the warranty to 4 years.

• The foot switches provide control over two independent send / return loops
• Can be used as a tuner output / mute switch
• 2 DC barrel connector outputs (2.1 x 5.5 mm) for looping through the power supply
• True bypass
• Loop 1 foot switch
• Loop 2 foot switch
• Status LEDs
• 6.3 mm Mono jack input / output
• 6.3 mm Mono jack send / return
• Power supply via optional 9V DC power supply (2.1 x 5.5 mm barrel connector, polarity (-) inside - not included)
• Current consumption 4 mA
• Passive operation without power supply possible (status LEDs and DC barrel connector outputs without function)
• Metal housing
• Dimensions (L x W x H): 65 x 120 x 46 mm
• Weight: 200 g

Note: Battery operation not supportedNote: Register your product at www.w-distribution.de/Warranty and extend the guarantee to 4 years.

Carl Martin Octa-Switch The Strap, looper / switcher for effects pedals, 4th generation of the well-known Octa-Switch series, Very simple, purely analogue control ("what you see is what you get"), 8 true-bypass loops (7x mono, 1x stereo), Loop 6-8 for amp FX loop applications ("4-cable-method"), 8 programmable banks, "Instant Access Mode" allows banks to be edited temporarily, MIDI Out sends "Program Changes", 2 assignable outputs for stereo or dual amping., 4 external switches per bank programmable (e.g. amp channel, reverb), Relay with gold-plated contacts, Fits on a single pedalboard rail ("strip design"), True bypass or buffered bypass, Power supply not included, Requires 9V DC (200mA to max. 560 mA), Dimensions: 58 x 8 x 4 cm, Weight: 1.5 kg

• A / B dial footswitch
• Passive way of working
• Two-colour status LED
• Metal housing
• Input and output: 6.3 mm mono
• Powered by optional 9V DC power adapter (not included), 2.1mm x 5.5 mm hollow plug, polarity (-) inside
• Power consumption: less than 100 mA
• Power supply only required for the status LED
• Dimensions (L x W x H) 95 x 47 x 35 mm
• Weight 140 g
• Made in USA

Note: no battery operation possible

• 8 FX loops (6 mono and 2 stereo)
• 128 Presets
• Tap foot-switch adjusts the BPM
• Can be configured to send/receive MIDI clock and send tap signals to output
• BPM can be global or per preset
• The tuner footswitch sends the input signal to the tuner and mutes the signal
• Foot-switchable gain boost on both channels
• Controls: Boost Level and Value
• LED: L1-8, PC, CC, 1-8, Tap, Boost, CTRL 1 and 2
• Display: Bank number
• Foot-switch: L1-8, PC, CC, 1-8, Bank Up / Down, Preset
• Tap, Tuner, Boost, CTRL 1 and 2
• Current consumption: 150 mA
• Power supply with a 9 V DC power supply unit (included in delivery)
• True Bypass
• Dimensions: (W x D x H) 483 x 152 x 64 mm

Connections:

• Input: 6.3 mm Jack
• Stereo output: 2x 6.3 mm Jack
• 8x Loop Mono Send: 6.3 mm jack
• Loop 8 stereo / right send: 6.3 mm Jack
• Loop 7 and 8 stereo / right return: 6.3 mm Jack
• Loop Insert (Between Loop 5 & 6 - 2 x 6.3 mm jack)
• Tuner output: 6.3 mm Jack
• Power supply connection: Coaxial socket 5.5 x 2.1 mm, minus pole inside
• MIDI input and output

Note: No battery operation possible

• Switching system 2 amps to 1 cabinet with remote input
• 1 Instrument input: 6.3 mm jack
• 2 Outputs to the amp: 6.3 mm jack
• 2 Outputs to speaker: 6.3 mm jack
• Switchable GND / lift per channel
• Toggle switch
• Remote control connection for foot switch: 6.3 mm jack
• External 9 V power supply with 130 mA
• Input Impedance: 10 Mohm
• Output Impedance: 10 kOhm
• Dimensions: 222 x 44 x 175 mm

• Compatible with Mooer TDL 3 - Ocean Machine and SC-30 (Art.481850)
• Range: 5 m
• 4 Foot-switch
• Status LEDs
• Metal casing
• Power supply via 9 V battery
• Dimensions (W x D x H) 217 x 75 x 45 mm
• Weight: 330 g

Note: Operation with power supply unit is not supported.

Note: Register your product at www.w-distribution.de/Warranty and extend the warranty to 4 years.

• 1 x XLR input
• 2 x XLR output
• Large foot switch for switching
• 15 dB pad can switch between channels
• -3 dB Trim and Gnd / Lift to Input B
• Robust metal housing
• Colour: Black