Switch Pedals

• Wireless 3-button footswitch
• With midi and smart device/tablet control functions
• Push buttons: Bluetooth (Instrument), Bluetooth (Smartphone/PC)
• LED: Bluetooth (Instrument), Bluetooth (Smartphone/PC) Pedal (L, C, R)
• Footswitch: L, C, R
• Connectors: CTL 1 and 2 (6.3 mm stereo jack), EXP (6.3 mm stereo jack), MIDI Out (3.5 mm stereo jack), USB
• Power consumption: 65 mA
• Power supply with two AAA batteries or a 9 V DC mains adapter (hollow female plug 5.5 x 2.1 mm - negative pole inside, not included, e.g. art. 409939)
• Dimensions (W x D x H): 207 x 77 x 32 mm
• Weight: 258 g

• A / B or A + B-Box
• 1 Input and 2 outputs
• Tuner output (can also be used for other effects)
• Passive operation
• Measurements (W x D x H): 65 x 110 x 57 mm
• For operation with LEDs a 9 V power supply or a 9 V battery is required (both not included)

• 3-Way splitter
• Input: 6.3 mm Jack
• 3 Outputs: 6.3 mm Jack
• Mains adapter connection: Hollow plug socket 5.5 x 2.1 mm, minus pole inside
• Current consumption: 27 mA
• Power supply via 9 V battery or 9 V DC power supply (suitable power supply Article Nr. 409939 - not included in delivery)
• Dimensions (W x D x H): 39 x 92 x 31 mm
• Weight: 250 g
• Made in Canada

• A / B or A & B on Y mode switch
• On / off footswitch
• Status LED - A: Red, B: Blue, Y: Pink
• 3 inputs / outputs (A / B / Y): 6.3 mm mono jack
• Metal housing
• Power supply via 9 V DC power supply (not included in delivery, available under Art. 409939)
• Can be operated without power supply (LED display then not active)
• Dimensions (W x D x H): 42 x 93.5 x 52 mm
• Weight: 160 g

• For The HOG II Guitar Synthesizer
• Dimensions (WxDxH): 70 x 115 x 57 mm

• Applications: Take effect pedals out of the signal path without further ado, and pick up a signal at any point in the signal chain, e.g. to switch to a tuner or as a switch between two instruments to an amp or vice versa from an instrument between two amps.
• Not only the signal, but also the signal ground is switched to avoid hum loops.
• All jack sockets are stereo; symmetrical signals can also be transmitted
• Mono and stereo signals can be combined
• Three different operating modes: switch (latching), button (momentary) or mixed mode
• Foot-switch: Loop On Off/Output
• Input: 6.3 mm Stereo jack
• Output: 6.3 mm Stereo jack
• FX Send / Return: 2 x 6.3 mm Stereo jack
• Mains adapter connection: Hollow plug socket 5.5 x 2.1 mm, minus pole inside
• Current consumption: 70 mA
• Power supply via 9-15 V DC power supply unit (not included in delivery, suitable power supply unit: Article Nr. 409939)
• Dimensions (W x D x H): 90 x 96 x 47 mm
• Weight: 350 g
• Made in Germany

Note: Battery operation is not supported.

• Switches 2 inputs to 1 output or 1 input to 2 outputs
• But also suitable for simultaneous transmission from 2 inputs to 1 output or 1 input to 2 outputs
• 9 V battery is only required for the LED display (not included, available under Art:417473)
• Housing made of metal
• Dimensions (W x H x D): 95 x 40 x 73 mm
• Weight: 336 g

• External compact footswitch
• For controlling the tempo of delay and modulation effects or any other pedal requiring a 'normally open' switch
• Compatible with many standard pedals
• 6.3 mm TS standard jack plug
• Does not need power supply
• Soft-touch switch for easy tap
• Button
• Dimensions (L x W x H): 94 x 39 x 47 mm
• Weight: 112 g

• Programmable 5-channel true bypass loop switcher for effects pedals
• The foot switches provide control over five independent loops and a separate tuner output
• Extremely simple and intuitive programming
• 15 Freely configurable presets (3 banks, 5 presets per bank)
• 2 Selectable switching modes (recall mode, direct mode)
• Integrated BJF buffer circuit with separate inputs and outputs
• Separate loop can be used as an amp footswitch (NO / NC)
• 6 DC barrel connector outputs (2.1 x 5.5 mm) for looping through the power supply
• True bypass
• 6 Foot switches (Bank PGM 1 / L 1, PGM 2 / L 2, PGM 3 / L 3, PGM 4 / L 4, PGM 5 / L 5, Mute / Tuner Out)
• Programming lock switch
• 5 Push buttons for programming the presets
• Status LEDs
• 6.3 mm Mono jack inputs / outputs
• Power supply via optional 9V DC power supply (2.1 x 5.5 mm barrel connector, polarity (-) inside - not included)
• Power consumption max. 200 mA
• Metal housing
• Dimensions (L x W x H): 60 x 440 x 50 mm
• Weight: 705 g

Note: Battery operation not supportedNote: Register your product at www.w-distribution.de/Warranty and extend the guarantee to 4 years.

• Can send Program Change / Patch Change (PC) and Control Change (CC) commands
• 128 Presets in 64 banks
• 2 Presets per bank
• Each preset has 5 PC and 5 CC numbers
• Selection of presets possible via MIDI input
• 4 Foot switches (1, 2, Down / Channel, Up / Bank)
• 1 x 5-pin MIDI input
• 2 x 5-pin MIDI output
• Power supply via optional 9V DC power supply with 2.1 x 5.5 mm barrel connector, polarity (-) inside
• Current consumption: max. 30 mA
• Metal housing
• Dimensions (L x W x H): 94 x 109 x 53 mm
• Weight: 320 g

Note: Battery operation is not supported.

Note: Register your product at www.w-distribution.de/Warranty and extend the guarantee to 4 years.

• For Electro Harmonix Stereo Looper 22500 Dual
• Dimensions (W x D x H): 70 x 115 x 57 mm

• Footswitches provide control over 10 independent loops and a separate tuner output
• Extremely simple and intuitive programming
• Winglink iOS app for programming and remote control
• 168 Freely configurable presets - 24 banks, 7 presets per bank
• 2 Selectable switching modes: Program Mode, Direct Mode
• Integrated BJF buffer circuit with separate inputs and outputs
• 7 Serial loops and 3 separate loops
• 3 Separate footswitch connections and an 8-pin DIN connector can be used as an amp footswitch
• Fully MIDI-capable with MIDI Out and MIDI In
• True Bypass
• 11 Footswitches: PGM1/L1, PGM2/L2, PGM3/L3, PGM4/L4, PGM5/L5, PGM6/L6, PGM7/L7, Bank Up/L8, Bank Dn/L9, Mute/L10, Direct
• 10 Keyswitches for programming the presets
• 5 Switches control the footswitch connections
• 4 Multi-function footswitches
• Bluetooth on/off switch
• Status LEDs
• Metal housing
• 6.3 mm Mono jack inputs / outputs
• 5-Pin MIDI input / output
• Power supply via 9V DC power supply unit with 2.1 x 5.5 mm barrel connector, polarity (-) inside (not included in delivery)
• Power consumption: max. 400 mA
• Dimensions (L x W x H): 100 x 440 x 64 mm
• Weight: 1.34 kg

Note: Register your product at www.w-distribution.de/Warranty and extend the warranty to 4 years.

• 3 Modes: Open, Close and Latch
• Compatible with each amplifier or pedal with 1/4"-Jack-Controller input
• Also compatible for use with keyboards, synthesizers, etc.
• 9 V DC connection

Catalinbread CB Tap Tempo; external compact foot switch for the Catalinbread Belle Epoch Deluxe; for controlling the tempo of delay and modulation effects or any other pedal that requires a normally open switch; compatible with many standard pedals; includes Catalinbread-branded 6 inch 1/4” TRS patch cable; requires no power supply; Made in USA.