Switch Pedals

• Compatible with Mooer TDL 3 - Ocean Machine and SC-30 (Art.481850)
• Range: 5 m
• 4 Foot-switch
• Status LEDs
• Metal casing
• Power supply via 9 V battery
• Dimensions (W x D x H) 217 x 75 x 45 mm
• Weight: 330 g

Note: Operation with power supply unit is not supported.

Note: Register your product at www.w-distribution.de/Warranty and extend the warranty to 4 years.

• 1 x XLR input
• 2 x XLR output
• Large foot switch for switching
• 15 dB pad can switch between channels
• -3 dB Trim and Gnd / Lift to Input B
• Robust metal housing
• Colour: Black

• Designed for stereo setups with two amps, stereo effects, or for recordings and live situations where you play directly into the mixer
• Two selectable footswitch modes: Normal / Rapid, for latching or momentary operation
• Switchable mono or stereo operation
• Bypass footswitch
• M/S slide switch
• Status LED
• Metal housing
• Input / output (TRS): 6.3 mm stereo jack
• Send / return (TRS): 6.3 mm stereo jack
• Power supply via 9V DC power supply unit with 2.1 x 5.5 mm barrel connector, polarity (-) inside (power supply unit not included in the delivery)
• Power consumption: 100 mA
• Dimensions (L x W x H): 98 x 48 x 35 mm
• Weight: 127 g

Note: Battery operation not supported.

Note Register your product at www.w-distribution.de/Warranty and extend the warranty to 4 years.

• Suitable for VOX Mini Go 10 and Mini Go 50
• Control of the looper, the effects and rhythm section possible
• In addition to the Mini Go 50 also retrieval of 3 user sounds possible

One Control Xenagama Tail Loop MKIII - 3-Channel Loop Switcher with BJF Buffer; 3-channel true bypass loop switcher for effects pedals, footswitches provide control over three independent loops and a separate tuner output, high quality BJF Buffer (switchable), 4x DC barrel plug outputs (2.1 x 5.5 mm) for power through connection, true bypass, 4 footswitches (Loop 1, Loop 2, Loop 3, Tuner Out/Mute), status LEDs, metal housing, 6.3 mm mono jack inputs / outputs, power supply via optional 9V DC power supply, 2.1 x 5.5 mm barrel plug, polarity (-) inside, passive operation possible without power supply (status LEDs, BJF buffer and DC barrel plug outputs without function), battery operation not supported, current draw max. 13 mA, dimensions (L x W x H) 41 x 244 x 46 mm / 1.61" x 9,60" x 1.81", weight 310 g / 0.68 lbs

• Optionally switches two inputs to one output or two outputs to one input
• Circuit with active electronics: Noiseless switching, no influence on the switched signals (-20 dBU inputs and outputs)
• Display of the switching state by means of a red LED (Channel A) and a yellow LED (Channel B)
• Power supply by 2 x Micro-battery (AAA-Size)
• Power consumption max. 5 mA therefore approx. 100 operating hours

• Custom Shop ABY pedal to switch between two amplifiers
• Possibility of switching between A/B and BOTH
• Two buffered outputs: one output is with a phase switch and one is with a custom designed isolating transformer
• Internal voltage-doubler (doubles the voltage internally): from 9 V to 18 V
• Powered with a 9V battery or power supply (not included, corresponding power supply available under Article Nr 409939)
• Power consumption: 12 mA
• Dimensions (W x H x D): 9.5 x 6.5 x 13 cm

• 2x 9V outputs
• True bypass

• Passive operation
• Footswitch A
• Footswitch B
• Status LEDs
• Metal housing
• 3x 6.3 mm jacks, IN / OUT
• Power supply is required only for the LEDs
• Powered via a 9V DC power supply unit (2.1 mm x 5.5 mm barrel connector, negative polarity (-) inside, not included, corresponding power supply unit available under Article Nr 409939)
• Dimensions (L x W x H): 68 x 112 x 45 mm
• Weight: 280 g
• Made in the USA

Note: battery operation is not possible.

• To remotely enable toggle switch options of compatible effects pedals
• Compatible with the JHS Morning Glory V4, the SuperBolt V2, and the Twin Twelve V2
• Suitable for standard TS instrument cables
• 6.3 mm jack plug
• Power supply is not required
• Dimensions (L x W x H): 53 x 50 x 50 mm
• Weight: 100 g
• Made in the USA

• For the Infinity3 Looper
• Dimensions (L x W x H): 6.6 x 11.5 x 5.5 cm
• Weight: 180 g

One Control Iguana Tail Loop MKIII - 5-Channel Loop Switcher with BJF Buffer; 5-channel true bypass loop switcher for effects pedals, footswitches provide control over five independent loops and a separate tuner output, high quality BJF Buffer (switchable), 7 x DC barrel plug outputs (2.1 x 5.5 mm) for power through connection, true bypass, 6 footswitches (Loop 1, Loop 2, Loop 3, Loop 4, Loop 5, Tuner Out/Mute), status LEDs, metal housing, 6.3 mm mono jack inputs / outputs, power supply via optional 9V DC power supply, 2.1 x 5.5 mm barrel plug, polarity (-) inside, passive operation possible without power supply (status LEDs, BJF bufffer and DC barrel plug outputs without function), battery operation not supported, current draw max. 13 mA, dimensions (L x W x H) 41 x 376 x 46 mm / 1.61" x 14.8" x 1.81", weight 450 g / 0.99 lbs

• Bypass switching via MIDI
• Can be controlled via Program Change (PC) or Control Change (CC) signals
• MIDI Channel Encode switch on the side selects the active MIDI channel (1-4)
• True Bypass
• Status LED
• Metal housing
• 6.3 mm stereo jack input / output (TRS)
• 6.3 mm stereo jack send / return (TRS)
• 5-Pin MIDI input
• Power supply via optional 9V DC power supply (not included), 2.1 x 5.5 mm barrel connector, polarity (-) inside
• Power consumption max. 100 mA
• Dimensions (L x W x H) 98 x 48 x 35 mm
• Weight: 127 g

Note: Battery operation not supported

Note: Register your product at www.w-distribution.de/Warranty and extend the warranty to 4 years.

• Three separate FX loops with flexible control enable the following configurations: up to three parallel FX loops - seamless switching between FX loops in XOR mode - send an instrument to 3 separate amplifiers or mix 3 instruments into one single output.
• Controls: Dry Vol, Master Vol
• Controls CH1, 2 & 3: Return, Send, EQ, Phase
• LED: CH1, CH2, CH3 Active
• Footswitch: CH1, CH2, CH3
• Input: 6.3 mm jack
• Output: 6.3 mm jack
• Send 1, 2 & 3: 3 x 6.3 mm jack
• Return 1, 2 & 3: 3 x 6.3 mm jack
• Mains adapter connector: Coaxial power connector 5.5 x 2.1 mm, negative polarity inside
• Power consumption: 45 mA
• Powered via 9V DC power adapter (included)
• Dimensions (W x D x H): 146 x 121 x 64 mm

Note: Battery operation is not supported.

• Programmable loop switcher with integrated power supply
• 4 Patches
• 5 Banks
• 20 Presets
• Easy to read LED display
• Tuner output
• On / Off switch with LED status indicator
• Easy to use
• Integrated, completely isolated power supply - Input: 12 V / 2 A -
• Outputs: 2x 9 V 100 mA, 2x 9 V 300 mA, 1x 9 V 500 mA
• Overload & short circuit protection
• Dimensions (H x W x D): 335 x 75 x 45 mm
• Weight: 690 g
• Includes 12 V 2A adapter & DC 60 cm cable

• With eight loops and an additional volume loop
• Analogue switch design for pure sound
• Unparalleled routing flexibility with the possibility to change the routing order and to create parallel effect chains
• Built-in memory for storing external control parameters such as delay time for each patch
• Buffer can be switched on or off for each input and output and stored in each patch
• Output Buffer volume adjustable
• 12 footswitch with switching noise-mute function
• LCD and 7-segment LED display
• Memory for 800 patches
• Incl. power supply

Connections:

• In 1/2
• Send 1-7
• Send 8L / 8R
• Send Vol
• Return 1-6
• Return 7L / 7R
• Return 8L / 8R
• Return Vol Out 1 / L
• Out 2 / R
• Tuner Out
• Ext Ctl 1/2
• Ctl 3/4
• Ctl 5/6
• Exp 1 Ctl 1/2 exp 2 3/4 Ctl
• MIDI Thru / Out

• Controls the LFO in Source Audio One Series modulation effects
• Switches additional distortion engines on Source Audio One Series distortion effects
• Scrolls through presets on the Source Audio Nemesis Delay or serves as a Momentary Hold switch
• Changes slider settings virtually to preset on all Source Audio One Series effects
• Operation: Normally open (NO), SPST switch, Momentary footswitch (SPST)
• Metal housing
• 3.5 mm TRRS output for connection to Source Audio One Series modulation effects
• No power needed
• Dimensions (L x W x H): 64 x 57 x 51 mm
• Weight: 180 g
• Including 3.5 mm TRRS connection cable

• 1x XLR input
• 2x XLR output
• Switchable 15 dB pad for channel A
• 6 dB and 15 dB pad for channel B
• Switchable GND Lift
• Large foot switch
• Grey metal housing

• MIDI functions: Program changes and control changes
• 2 Switches - e.g. for channel switching
• 8x Effect loopers for patching stomp
• 8 Banks with 4 presets
• Buffered bypass
• 240 mA Power consumption for operating the looper
• Dimensions (W x H x D): 54 x 6.7 x 5.3 cm
• Weight: 1.68 kg
• Compatible power supply unit: Art. 409939 (not included)