|
|
|
Microphone Preamp
- For dynamic and ribbon microphones
- Extremely low-noise Class A JFet amplifier
- 27 dB gain (@3 kOhm load)
- XLR 3-pin female to XLR 3-pin male
- 4 Coordinated JFets
- 6 dB/octave high pass filter with a corner frequency of 220 Hz
Note: Requires 24 - 48 V phantom power and does NOT transfer phantom power to the microphone.
|
Price History: TritonAudio FetHead Filter
62.00 $ |
|
|
|
Black Lion Audio Auteur DT; 1-channel preamp; combination of DI box and preamplifier; 60dB Gain; frequency response: 10Hz - 30kHz; transformer-coupled output stage; Nichicon and Vishay capacitors; front panel controls for phantom power, phase inversion, -10db pad and Hi-Z; backlit VU meter; analog in- / outputs: 1x Hi-Z input (6.3mm jack), 1x mic input (3-pin, XLR), 1x output (balanced, 6.3mm jack); compact desktop design; maple wood side panels; power supply: 24V AC, 500mA; dimensions (L x W x H): 10 x 26 x 21cm; weight: 1.25kg
|
Price History: Black Lion Audio Auteur DT
299.00 $ |
|
|
|
1-Channel Microphone and Instrument Preamp
- Fully discrete, hand-built design with 3 tubes per channel
- Tape saturation adds harmonic distortion and compression
- 90 dB gain
- CineMag USA transformers
- High quality (2x) 12AX7 and (1x) 12AU7 vacuum tubes
- High Gain control activates the third tube in the circuit for an additional 20 dB (from 70 dB to 90 dB)
- 48 V phantom power and polarity switch
- "Tone" circuit changes the impedance of the input transformer
- 80 Hz high-pass filter
- 2 kHz low-pass filter
- Inputs: XLR microphone input, TS jack instrument input and TRS jack line input
- Outputs: XLR / TRS line level
- VU meter level meter
- Frequency response: 20 Hz - 20 kHz
- Dimensions (W x D x H): 483 x 179 x 89 mm
- Weight: 3.7 kg
|
Price History: Warm Audio WA-MPX
745.00 $ |
|
|
|
2-Channel Gain Amplifier
- +25 dB for dynamic or passive ribbon microphones
- To be used in conjunction with a microphone amplifier with standard phantom power on mixers/preamplifiers/audio interfaces with mic input
- Requires phantom power
- 2 x XLR input and output
- Metal casing
- Band for fixing to microphone stand included
|
Price History: Cloud Microphones Cloudlifter CL-2 Mic Activator
272.00 $ |
|
|
|
Single Channel Microphone Preamp
- Based on the 1073
- Hand-wound Carnhill transformers
- Completely discreet, three-stage microphone preamp
- Amplification: 80 dB microphone and 50 dB line
- -20 dB pad
- LO-Z for switching the input impedance from 1200 to 300 Ohm
- HP filter at 80 Hz
- Connections: XLR Microphone input
- XLR line input
- XLR line output
- Instrument input: 6.3 mm jack
- Switchable 48V phantom power
- External power supply included
- Build: 19" / 1 RU
|
Price History: Heritage Audio HA-73 Elite
625.00 $ |
|
|
|
Stereo Microphone Amplifier
- Based on the well-known Class A amplifier
- Legendary Neve sound
- trafosym i/os
- Size: 19" / 1 RU
|
Price History: AMS Neve 1073 DPA Preamp Stereo
2,155.00 $ |
|
|
|
1-Channel Microphone Preamp
- Max. gain +76 dB
- +48V phantom power switchable
- PAD with -20dB attenuation
- Phase-rotation switch
- Mute switch
- Gain control
- Multi-colour signal status LED (green, yellow, red)
- Connections: Microphone input XLR, line output XLR
- Incl. external plug-in power supply 24V
- Design: Desktop
|
Price History: Horch Audiogeräte MP NVR Mic Preamp
811.00 $ |
|
|
|
Channel Strip Preamps
- Rasterized volume control with 12 positions
- Ribbon mic mode, 3-band precision EQ, full parametric mid band, peak and shelf mode for high and low band
- Optical compressor
- Mic Amp direct output
- EQ / COMP section line input
- Built-in power supply
- +48V Phantom power
- 10 Segment meters for gain reduction and output volume
- Connections: 6.3 mm Jack Instrument input Hi-Z, XLR micro input, balanced XLR direct output, 6.3 mm direct Output of the mic pre section, balanced XLR line input, balanced XLR main output, balanced and unbalanced jack output 6.3 mm
- Type: 19", 1U
|
Price History: Grace Design M103 Channel Strip
2,799.00 $ |
|
|
|
Single-Channel Microphone Preamp with Equaliser
- Based on the 1073
- Hand-wound Carnhill transformers
- Completely discreet, three-stage microphone preamp
- Amplification: 80 dB microphone and 50 dB line
- -20 dB pad
- LO-Z for switching the input impedance from 1200 to 300 Ohm
- HP filter at 80 Hz
- Completely discreet 3-band vintage EQ with induction coils
- Hi-Shelf filter at 12 kHz
- Mid-band, switchable between six operating frequencies and OFF
- Lo-shelf filter, switchable between four operating frequencies and OFF
- Coil-based high-pass filter, switchable between four operating frequencies and OFF
- Connections: XLR Microphone input
- XLR line input
- XLR line output
- Instrument input: 6.3 mm jack
- Switchable 48V phantom power
- External power supply unit included
- Build: 19" / 1 RU
|
Price History: Heritage Audio HA-73 EQ Elite
866.00 $ |
|
|
|
Microphone / Guitar interface for iPad/iPhone/iPod
- Microphone / Instrument preamplifier
- Balanced / Unbalanced combi input (XLR / jack)
- Switchable phantom power for condenser microphones
- Level control for microphone input
- Headphone output
- Connection with Apple devices via 4-pin mini connector (analog)
- No battery required when used as instrument preamp
- 2x AA batteries required for microphone preamp and phantom power
- Two-track recording app from Tascam is available in the app store for free download
- Dimensions: 106 x 40 x 45 mm
- Weight: 87 g
- Compatible with: iPhone 3, iPhone 3GS, iPhone 4, iPod touch 1G, 2G, 3G, 4G, iPad 1G and 2G
|
Price History: Tascam iXZ
65.00 $ |
|
|
|
2-Channel Preamplifier
- Ideal for vocals, drums, guitar etc.
- Mix of vintage sound and modern clarity
- Line and instrument input via jack sockets on the front, individually switchable for each channel
- IC-based input stage for modern transparent sound
- Output stage with Cinemag transformer
- Frequency range: 10 - 30,000 Hz
- Gain: 0 - 62dB continuously adjustable
- Switchable -10dB PAD
- Switchable phase reversal
- THD+N (@ +4dBu output): 0.0033% @ +10dBu gain; 0.0054% @ +24dBu gain, 0.027% @ +40dBu gain
- 2 Microphone inputs: XLR, balanced
- 2 Line/Hi-Z inputs: 6.3 mm jack
- 2 Outputs: 6.3 mm jack, balanced
- Headroom: 26 dB
- Phantom power: +48 V
- External 24VAC power supply
- Design: 1U at half rack width
- Mounted in standard 19-inch cases via attached rack ears
- Dimensions (L x W x H): 24 x 18 x 5 cm
- Weight: 1.9 kg
|
Price History: Black Lion Audio Auteur MKIII
451.00 $ |
|
|
|
Channel Strip
- 2520 Opamp, API 512 C mic preamp, 527 compressor, redesign of the famous 550A EQ (3 bands, each with 7 selectable frequencies)
- Stereo bus with rotary control solo, SIP, mute, insert, polarity and compressor link
- Free patching on the back
- External fader jack
- Three 7 segment LED VU displays
- Int. power supply
|
Price History: API Audio The Channel Strip
2,899.00 $ |
|
|
|
1-Channel Microphone and Instrument Preamp
- Up to 71 dB gain
- Transformer bypass switch
- Two different discrete OpAmps: 1731 (Vintage) and 918 (Cleaner)
- Tone switch - switches the input impedance from 600 ohms to 150 ohms
- Hi-Z input sends the signal through the complete circuit
- Balanced outputs: XLR and 6.3 mm jack
- Insert: 6.3 mm jack
- 48V phantom power
- Format: 19"/ 1 HU
|
Price History: Warm Audio TB12 Tone Beast Black
545.00 $ |
|
|
|
Preamp for acoustic instruments
- Specially designed for acoustic guitars, but also very well suited for many other acoustic instruments
- Excellently suited in combination with the Pure pickups
- Special broadband center filter
- +/- 20 db bass
- Center and height controls
- Internal gain trimmer
- Frequency response: 10 - 30.000 Hz
- Bass control starts at 100 Hz
- Midrange filter from 1.5 kHz
- Altimeter controls at 10 kHz
- Input impedance: 1 MOhm
- Output impedance 10 kOhm
- Battery life: approx. 180 hours
|
Price History: K&K Pure Preamp
109.00 $ |
|
|
|
12-Channel Microphone Preamplifier
- Digitally controlled
- Integrated MADI / ADAT / DANTE connectivity
- SteadyClock FS
- Gain up to 75 dB for signals up to +18 dBu
- Signal-to-noise ratio 121.2 dB(A) on all channels
- Integrated routing matrix
- LCD display
- Design: 19" 1HE
Connectors: - 4 x Mic/line/instrument combo input XLR/jack: 6.3 mm
- 8 x Mic/line input XLR
- 3 x ADAT output
- MADI BNC input and output, MADI optical via optional SFP modules
- 2 x Gigabit Ethernet (802.3 compliant)
- Word clock input and output
- 1 x Stereo headphone output: 6.3 mm jack
- Connection for redundant power supply
|
Price History: RME 12Mic-D
3,180.00 $ |
|
|
|
1-Channel Preamplifier
- Mic / Line / DI with double signal path (Class-A tube and transimpedance solid state)
- Phase-aligned Twin-Finity blending (tube / solid state)
- Balanced output stage
- 70 dB + gain
- + 48V Phantom power
- Pad (- 15dB) phase reversal and low-cut filter (75Hz)
- Illuminated VU meter
- High-impedance input on the front (switched from mic/line)
- XLR microphone input on the rear, XLR line input and XLR line output
- Internal power supply
- Includes 19" rack kit
|
Price History: Universal Audio 710 Twin-Finity
899.00 $ |
|
|
|
Tube Channel Strip
- Class A tube preamp
- Compressor / expander / de-esser / gate
- 4-Band semiparametric EQ with cut / boost switching pre or post compressor switchable
- Frequency response: 12 - 100000 Hz analog
- Sampler data: 44.1 - 192 kHz
- Digital Connections: ADAT
- S / PDIF optical / coaxial
- AES / EBU and USB
- Word Clock I / O
- Analogue Connections: MIC / Line / Instrument-Input XLR-combo
- Input: 6.3 mm jack
- Balanced output XLR and 6.3 mm jack
- Mic-Preamp Out 6.3 mm jack
- VU meter
- Format: 19"/ 2U
- Dimensions (H x W x D): 88.9 x 483 x 233 mm
- Weight: 4.7 kg
|
Price History: ART Voice Channel
699.00 $ |
|
|
|
Microphone Preamp
- For dynamic and ribbon microphones
- Extremely low-noise Class A JFet amplifier
- 27 dB gain (@3 kOhm load)
- XLR 3-pin female to XLR 3-pin male
- 4 Coordinated JFets
Note: Requires 24 - 48 V phantom power and does NOT transfer phantom power to the microphone.
|
Price History: TritonAudio FetHead
57.00 $ |
|
|
|
Mono Tube Mic Preamp
- The original circuit of the legendary UA 610 console with the same warm preamp sound
- Gain and Level controls for controlling the tube saturation
- 48V Phantom power
- Phase reverse
- Selectable input impedance
- Additional DI instrument input
|
Price History: Universal Audio Solo 610
1,085.00 $ |
|
|
|
Active Inline Preamp
- Gain: +28 dB
- Ideal for tapes - or dynamic microphones with low output
- Class A FET transistors
- Low self-noise
- Enables long cable runs and reduces susceptibility to RF interference
- Gold-plated XLR contacts
- Robust all-metal housing
Note: requires 48V phantom power.
|
Price History: SE Electronics DM1
99.00 $ |
